EN 14749:2016

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.KLQMVNHMöbel - Wohn- und Küchen-Behältnismöbel und Küchen-Arbeitsplatten - Sicherheitstechnische Anforderungen und PrüfungenMeubles - Élements de rangement et plans de travail - Exigences de sécurité et méthodes d'essaiFurniture - Domestic and kitchen storage units and kitchen-worktops - Safety requirements and test methods97.140PohištvoFurniture97.040.10Kuhinjsko pohištvoKitchen furnitureICS:Ta slovenski standard je istoveten z:EN 14749:2016SIST EN 14749:2016en,fr,de01-julij-2016SIST EN 14749:2016SLOVENSKI
STANDARDSIST EN 14749:20061DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14749
February
t r s x ICS
{ yä r v rä s râ
{ yä s v r Supersedes EN
s v y v {ã t r r wEnglish Version
Furniture æ Domestic and kitchen storage units and kitchenæworktops æ Safety requirements and test methodsAmeublement æ Meubles de rangement domestiques et de cuisine et plans de travail de cuisine æ Exigences de sécurité et méthodes d 5essai
Möbel æ Wohnæ und Küchenbehältnismöbel und Küchenarbeitsplatten æ Sicherheitstechnische Anforderungen und Prüfverfahren This European Standard was approved by CEN on
t s November
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v y v {ã t r s x ESIST EN 14749:2016

Additional test methods . 19 A.1 Vertical downwards static load of top hinged flaps . 19 A.2 Stability of TV-furniture . 19 A.2.1 One door, extension element or flap opened – storage areas unloaded . 19 SIST EN 14749:2016

Guide to testing of units and components . 22 Annex C (informative)
Example of loading of wall hanging units and top hanging units (see 5.3.11.3 overload). 27 Annex D (informative)
Method for calculation of vertical and horizontal acting forces . 28 Bibliography . 32
A component that is attached to the wall is e.g. a hook, a rail. 3.6 kitchen-worktop work surface primarily intended to be used for preparing food 3.7 TV-furniture unit designed to support a TV-set 3.8 component part of a unit including hardware 3.9 extension element component that can be pulled out and pushed in Note 1 to entry: An extension element can be a basket, a drawer or a suspended pocket file. 3.10 storage area storage volume space in furniture for storage Note 1 to entry: A storage area/-volume can be in extension elements and on shelves, bottoms and tops. 3.11 accessible part part to which access can easily be gained by the user when in its intended configuration of use and for which the probability of unintentional user contact is high Note 1 to entry: This includes, but is not limited to: —
the exposed edges and corners of storage units to which the user has access when the doors, drawers and extension elements are closed, —
the corners and edges of handles. SIST EN 14749:2016

· 25 mm or
¶ 8 mm in any position during movement 3.13 clear height unobstructed height above the top of the bottom surface Note 1 to entry: See Figure 1.
Key 1 structure of the unit 2 clear height 3 extension element Figure 1 — Clear height [SOURCE: EN 16122:2012, 3.2 modified - …or the structure of the unit … has been deleted; another figure has been included] 3.14 levelling device adjustable device intended to keep the item of furniture perpendicular to the floor Note 1 to entry: A levelling device can be an adjustable foot or similar. 3.15 potential energy multiplication of the total mass (kg) of the unit (or the component), gravity (m/s2) and the height (m) above the floor to the centre of gravity Note 1 to entry: For the purpose of this European Standard gravity can be considered to be 10 m/s2. SIST EN 14749:2016

¶ 8 mm or
· 25 mm. This applies to any components moving relatively to each other, with the exception of doors, flaps and extension elements including their hardware. The safety distances also apply to the distance between handles/handgrips and other components. 5.2.2 Units moving vertically In order to avoid pinching points for feet, the safety height for units moving vertically shall be at least 100 mm from the floor. 5.2.3 Lids In order to prevent children's heads and necks from being entrapped by hinged lids of storage units horizontal lids that are 1 000 mm or less from the floor and weigh 0,25 kg or more, shall be provided with lid-support mechanisms to prevent sudden collapse or dropping of the lid. The lid-support mechanism shall support the lid so that at no position in the arc of travel of the lid from within 50 mm of the fully closed position through an arc not to exceed 60° from the fully closed position shall it drop more than 12 mm under the influence of its own mass, except in the last 50 mm of travel. The test shall be carried out in accordance with EN 71-1:2014, 8.31.2. In the case of adjustable mechanisms, product information shall be given for the correct adjustment. SIST EN 14749:2016

· 35 kg. Where specified in EN 16122, storage units and their components shall be loaded in accordance with Table 1. Unless otherwise specified, all storage components, which are not subject to testing, shall be uniformly loaded with the specified load(s). When the unit or component is conspicuously and durably marked by the manufacturer with a maximum load, the unit or component shall be loaded with the stated maximum load multiplied by 1,2. Details on testing and application of safety requirements can be found in Annex B (informative). 5.3.2 Shelves 5.3.2.1 Shelf retention – vertical downward Unloaded shelves shall not fall down when tested according to EN 16122:2012, 6.1.3 with a downwards vertical force of 100 N. 5.3.2.2 Shelf retention – horizontal outward Unloaded shelves shall not fall down when tested according to EN 16122:2012, 6.1.2 with a force representing 50 % of the weight of the unloaded shelf. 5.3.3 Shelf supports If the clear height is less than 200 mm the test is not carried out. This test shall be carried out according to EN 16122:2012, 6.1.5 with impact plate No. One on all horizontal surfaces e.g. shelves, tops and bottoms that can be used as storage area. The horizontal surface shall be loaded according to Table 1. In case of identical shelf supports and horizontal surfaces only one test shall be carried out. After the test, the horizontal surface and the shelf supports shall show no fracture or other damage that can affect the safety. SIST EN 14749:2016
...