EN ISO 29481-1:2017

SLOVENSKI STANDARD
01-december-2017
,QIRUPDFLMVNLPRGHOLVWDYE3ULURþQLN]LQIRUPDFLMDPLGHO0HWRGRORJLMDLQ
REOLND,62
Building information models - Information delivery manual - Part 1: Methodology and
format (ISO 29481-1:2016)
Bauwerks-Informations-Modelle - Informations-Lieferungs-Handbuch - Teil 1: Methodik
und Format (ISO 29481-1:2016)
Modèles des informations de la construction - Contrat d'interchange - Partie 1:
Méthodologie et format (ISO 29481-1:2016)
Ta slovenski standard je istoveten z: EN ISO 29481-1:2017
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
91.010.01 Gradbeništvo na splošno Construction industry in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 29481-1
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2017
EUROPÄISCHE NORM
ICS 91.010.01
English Version
Building information models - Information delivery
manual - Part 1: Methodology and format (ISO 29481-
1:2016)
Modèles des informations de la construction - Bauwerks-Informations-Modelle - Informations-
Protocole d'échange d'informations - Partie 1: Lieferungs-Handbuch - Teil 1: Methodik und Format
Méthodologie et format (ISO 29481-1:2016) (ISO 29481-1:2016)
This European Standard was approved by CEN on 24 February 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 29481-1:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 29481-1:2016 has been prepared by Technical Committee ISO/TC 59 “Buildings and
civil engineering works” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 29481-1:2017 by Technical Committee CEN/TC 442 “Building Information Modelling
(BIM)” the secretariat of which is held by SN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2018, and conflicting national standards shall be
withdrawn at the latest by April 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 29481-1:2016 has been approved by CEN as EN ISO 29481-1:2017 without any
modification.
INTERNATIONAL ISO
STANDARD 29481-1
Second edition
2016-05-01
Building information models —
Information delivery manual —
Part 1:
Methodology and format
Modèles des informations de la construction — Contrat
d’interchange —
Partie 1: Méthodologie et format
Reference number
ISO 29481-1:2016(E)
©
ISO 2016
ISO 29481-1:2016(E)
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

ISO 29481-1:2016(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Information delivery manual . 3
4.1 General . 3
4.2 Users of this part of ISO 29481 . 3
4.3 Business context . 4
4.4 Complete schema . 5
4.5 Breaking a complete schema to support requirements. 5
4.6 Supporting the building information modelling process . 5
4.7 Supporting the business process . 5
4.8 Supporting the software solution . 6
4.9 Content in the specific IDM . 6
5 IDM Framework . 6
5.1 General . 6
5.2 Basic framework . 8
5.2.1 General. 8
5.2.2 IDM component header information . . 8
5.2.3 IDM component overview. 9
5.3 Interaction map/transaction map . 9
5.4 Process maps . 9
5.5 Exchange requirements .10
5.5.1 General.10
5.5.2 Information units .10
5.5.3 Information constraints .10
5.6 Technical implementation .11
5.6.1 General.11
5.6.2 Implementation of metadata .11
5.6.3 Interaction framework .11
5.6.4 Model view definition (MVD) .11
Annex A (informative) IDM development process .13
Annex B (informative) Examples of simplified IDM components .17
Annex C (informative) Reference life cycle stages .22
Annex D (informative) IDM use of BPMN methods .24
Bibliography .29
ISO 29481-1:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and doe
...