EN ISO 24264:2020

SLOVENSKI STANDARD
01-december-2020
Obutev - Preskusne metode za votle in kompaktne pete ter napetnike - Trdnost
pritrditve napetnikov (ISO 24264:2020)
Footwear - Test methods for hollow and compact heels and top pieces - Top piece
attachment strength (ISO 24264:2020)
Schuhe - Befestigungsstärke von Oberflecken (ISO 24264:2020)
Chaussures - Méthodes d'essai pour les talons creux et pleins avec bonbouts -
Résistance de fixation des bonbouts (ISO 24264:2020)
Ta slovenski standard je istoveten z: EN ISO 24264:2020
ICS:
61.060 Obuvala Footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 24264
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2020
EUROPÄISCHE NORM
ICS 61.060
English Version
Footwear - Test methods for hollow and compact heels
and top pieces - Top piece attachment strength (ISO
24264:2020)
Chaussures - Méthodes d'essai pour les talons creux et Schuhe - Befestigungsstärke von Oberflecken (ISO
pleins avec bonbouts - Résistance de fixation des 24264:2020)
bonbouts (ISO 24264:2020)
This European Standard was approved by CEN on 6 September 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24264:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 24264:2020) has been prepared by Technical Committee ISO/TC 216
"Footwear" in collaboration with Technical Committee CEN/TC 309 “Footwear” the secretariat of which
is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2021, and conflicting national standards shall be
withdrawn at the latest by April 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 24264:2020 has been approved by CEN as EN ISO 24264:2020 without any modification.

INTERNATIONAL ISO
STANDARD 24264
First edition
2020-10
Footwear — Test methods for hollow
and compact heels with top pieces —
Top piece attachment strength
Chaussures — Méthodes d'essai pour les talons creux et pleins avec
bonbouts — Résistance de fixation des bonbouts
Reference number
ISO 24264:2020(E)
©
ISO 2020
ISO 24264:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

ISO 24264:2020(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus . 1
5 Sampling and conditioning . 2
6 Preparation of test-pieces . 2
7 Procedure.
...