EN ISO 24265:2020
(Main)Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO 24265:2020)
Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO 24265:2020)
This document specifies a method for the determination of the rubbing resistance of leather and synthetic materials using rubber.
The method aims to establish testing conditions that are similar to those of the practical use of footwear subjected to drastic stress, as is the case of hiking or children's footwear, where the upper of one of the shoes is expected to rub with the sole of the other.
This method is applicable to all types of leather and synthetic materials intended for shoe uppers.
Schuhe - Prüfverfahren für Oberteile - Prüfung der Reibfestigkeit mit einem Gummikissen (ISO 24265:2020)
Dieses Dokument legt ein Verfahren zur Bestimmung der Reibfestigkeit von Leder und synthetischen Materialien mit einem Gummi fest.
Das Verfahren zielt darauf ab, Prüfbedingungen zu schaffen, die denen ähneln, die in der Praxis bei Schuhen auftreten, die hohen Belastungen ausgesetzt sind, wie bei Wanderschuhen und Kinderschuhen, wo davon ausgegangen wird, dass das Obermaterial des einen Schuhs an der Sohle des anderen Schuhs reibt.
Dieses Verfahren gilt für alle Arten von Leder und synthetischen Materialien, die als Schuhobermaterialien dienen sollen.
Chaussures - Méthodes d'essai pour les tiges - Résistance au frottement à l'aide d'une bande en caoutchouc (ISO 24265:2020)
Le présent document spécifie une méthode pour la détermination de la résistance au frottement du cuir et des matériaux synthétiques à l'aide de caoutchouc.
Cette méthode a pour but d'établir des conditions d'essai similaires aux conditions d'utilisation pratique d'une chaussure soumise à une contrainte intense, comme c'est le cas des chaussures de randonnée ou des chaussures d'enfants, lorsque le frottement de la tige de l'une des chaussures avec la semelle de l'autre chaussure est prévisible.
Cette méthode s'applique à tous les types de cuir et de matériaux synthétiques destinés à la fabrication de tiges de chaussures.
Obutev - Metode za preskušanje zgornjih delov - Odpornost proti drgnjenju z gumijastim trakom (ISO 24265:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2021
Obutev - Metode za preskušanje zgornjih delov - Odpornost proti drgnjenju z
gumijastim trakom (ISO 24265:2020)
Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO
24265:2020)
Schuhe - Prüfverfahren für Oberteile - Prüfung der Reibfestigkeit mit einem
Gummikissen (ISO 24265:2020)
Chaussures - Méthodes d'essai pour les tiges - Résistance au frottement à l'aide d'une
bande en caoutchouc (ISO 24265:2020)
Ta slovenski standard je istoveten z: EN ISO 24265:2020
ICS:
61.060 Obuvala Footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 24265
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2020
EUROPÄISCHE NORM
ICS 61.060
English Version
Footwear - Test methods for uppers - Resistance to
rubbing using a rubber strip (ISO 24265:2020)
Chaussures - Méthodes d'essai pour les tiges - Schuhe - Prüfverfahren für Oberteile - Prüfung der
Résistance au frottement à l'aide d'une bande en Reibfestigkeit mit einem Gummikissen (ISO
caoutchouc (ISO 24265:2020) 24265:2020)
This European Standard was approved by CEN on 14 September 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24265:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 24265:2020) has been prepared by Technical Committee ISO/TC 216
"Footwear" in collaboration with Technical Committee CEN/TC 309 “Footwear” the secretariat of which
is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2021, and conflicting national standards shall be
withdrawn at the latest by April 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 24265:2020 has been approved by CEN as EN ISO 24265:2020 without any modification.
INTERNATIONAL ISO
STANDARD 24265
First edition
2020-10
Footwear — Test methods for uppers
— Resistance to rubbing using a
rubber strip
Chaussures — Méthodes d'essai pour les tiges — Résistance au
frottement à l'aide d'une bande en caoutchouc
Reference number
ISO 24265:2020(E)
©
ISO 2020
ISO 24265:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
ISO 24265:2020(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Preparation of test pieces . 4
6.1 Dry rubbing resistance . 4
6.2 Wet rubbing resistance . 4
7 Procedure. 4
7.1 Dry rubbing resistance . 4
7.2 Wet rubbing resistance . 5
8 Expression of results . 5
9 Test report . 5
Bibliography . 6
ISO 24265:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in ac
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.