EN 10140:1996
(Main)Cold rolled narrow steel strip - Tolerances on dimensions and shape
Cold rolled narrow steel strip - Tolerances on dimensions and shape
This European Standard applies to cold rolled narrow strip in coils and cut length in thicknesses up to 10 mm and of widths less than 600 mm, made from unalloyed and alloyed steels with the exception of stainless and heat-resisting steels and the products given in 1.2. The application of this European Standard to products with other dimensions shall be agreed separately.
Kaltband - Grenzabmaße und Formtoleranzen
Diese Europäische Norm gilt für Kaltband in Rollen in Walzbreiten < 600 mm sowie für daraus abgelängte Stäbe in Dicken bis 10 mm aus unlegierten und legierten Stählen mit Ausnahme der nichtrostenden und hitzebeständigen Stählen mit Ausnahme der nichtrostenden und hitzebeständigen Stähle sowie der in 1.2 genannten Stähle und Erzeugnisse. Die Anwendung dieser Europäischen Norm auf Erzeugnisse mit anderen Nennmaßen muß besonders vereinbart werden.
Feuillards laminés à froid - Tolérances de dimensions et de forme
La présente norme européenne est applicable aux feuillards laminés à froid en bobines et aux feuillards coupés à longueur, d'épaisseur jusqu'à 10 mm et de largeur inférieure à 600 mm, en aciers non alliés ou alliés à l'exception des aciers inoxydables et réfractaires et des produits cités en 1.2. L'application de la présente norme européenne à des produits présentant d'autres dimensions doit faire l'objet d'un accord particulier.
Hladno valjani ozki jekleni trakovi - Mejni odstopki mer in tolerance oblik
General Information
- Status
- Withdrawn
- Publication Date
- 20-Aug-1996
- Withdrawal Date
- 11-Jul-2006
- Technical Committee
- ECISS/TC 109 - Coated and uncoated flat products to be used for cold forming
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 12-Jul-2006
- Completion Date
- 12-Jul-2006
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10140:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Cold rolled narrow steel strip - Tolerances on dimensions and shape". This standard covers: This European Standard applies to cold rolled narrow strip in coils and cut length in thicknesses up to 10 mm and of widths less than 600 mm, made from unalloyed and alloyed steels with the exception of stainless and heat-resisting steels and the products given in 1.2. The application of this European Standard to products with other dimensions shall be agreed separately.
This European Standard applies to cold rolled narrow strip in coils and cut length in thicknesses up to 10 mm and of widths less than 600 mm, made from unalloyed and alloyed steels with the exception of stainless and heat-resisting steels and the products given in 1.2. The application of this European Standard to products with other dimensions shall be agreed separately.
EN 10140:1996 is classified under the following ICS (International Classification for Standards) categories: 77.140.50 - Flat steel products and semi-products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10140:1996 has the following relationships with other standards: It is inter standard links to EN 10140:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10140:1996 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10140:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hladno valjani ozki jekleni trakovi - Mejni odstopki mer in tolerance oblikKaltband - Grenzabmaße und FormtoleranzenFeuillards laminés a froid - Tolérances de dimensions et de formeCold rolled narrow steel strip - Tolerances on dimensions and shape77.140.50SROL]GHONLFlat steel products and semi-product
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...