iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN 598

(Main)

Coated and lined ductile iron pipes, fittings and their joints for sewerage and drainage applications - Products characteristics and test and assessment methods

Coated and lined ductile iron pipes, fittings and their joints for sewerage and drainage applications - Products characteristics and test and assessment methods

This European Standard specifies the products characteristics and associated test and assessment methods applicable to coated and lined ductile iron pipes, coated and lined fittings and joints which include (non-exhaustive list) coated and lined accessories such as collar, tees, saddles, bends, tapers, flanged socket.
Intended use: Gravity and pressure drains and sewers:
-   operating without pressure, or with positive or negative pressure;
-   installed below or above ground;
-   for conveyance of surface water, wastewater in separate systems or in combined systems.

Umhüllte und ausgekleidete Rohre, Formstücke, Zuberhörteile aus duktilem Gusseisen und ihre Verbindungen für die Abwasser-Entsorgung - Anforderungen und Prüfverfahren

Diese Europäische Norm legt die Produktmerkmale und zugehörigen Prüf  und Bewertungsverfahren für umhüllte und ausgekleidete Rohre aus duktilem Gusseisen, umhüllte und ausgekleidete Formstücke und Verbindungen fest, zu denen (Aufzählung nicht abschließend) umhüllte und ausgekleidete Zubehörteile wie Kupplungen, Abzweige, Schellen, Bögen, Übergangsstücke, Flanschmuffenstücke gehören.
Vorgesehener Verwendungszweck: Schwerkraft  und Druck Abwasserleitungen und  kanäle:
-   zum Betrieb als Freispiegelleitung oder mit positivem oder negativem Druck;
-   die erdüberdeckt oder oberirdisch eingebaut werden,
zum Transport von Oberflächenwasser und Abwasser in Trenn  oder in Mischwassersystemen.

Tuyaux et raccords en fonte ductile revêtus extérieurement et intérieurement et leurs assemblages pour l’assainissement et l’évacuation - Caractéristiques des produits et méthodes d’essai et d’évaluation

La présente Norme européenne spécifie les caractéristiques des produits et les méthodes d’essai et d’évaluation associées applicables aux tuyaux et raccords en fonte ductile revêtus extérieurement et intérieurement, ainsi qu’aux assemblages comprenant (liste non ¬exhaustive) les accessoires revêtus extérieurement et intérieurement tels que les manchons, les tés, les selles, les coudes, les cônes et les brides-emboîtements.
Ces tuyaux, raccords et assemblages sont destinés aux branchements et aux collecteurs d’assainissement gravitaires et sous pression :
-   fonctionnant sans pression, ou sous pression positive ou négative ;
-   mis en oeuvre dans le sol ou en élévation ;
pour transporter les eaux en surface et les eaux usées en système séparatif ou unitaire.

Prevlečene cevi, fitingi in spoji iz duktilne železove litine za odvodnjavanje in kanalizacijo - Karakteristike proizvoda ter metode za preskušanje in ocenjevanje

General Information

Status
Not Published
Publication Date
02-Jun-2019
ICS
23.040.05 - Pipeline and its parts for external sewage systems
23.040.10 - Iron and steel pipes
23.040.40 - Metal fittings
Technical Committee
CEN/TC 203 - Cast iron pipes, fittings and their joints
Drafting Committee
CEN/TC 203/WG 9 - Revision of EN 545, EN 598 and EN 969
Current Stage
3098 - Decision to reject - Consensus building
Completion Date
14-Mar-2019
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/131 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on pipes, tanks and ancillaries, not in contact with water intended for human consumption
Ref Project
oSIST prEN 598:2017 - Coated and lined ductile iron pipes, fittings and their joints for sewerage and drainage applications - Products characteristics and test and assessment methods

Relations

Revises
EN 598:2007+A1:2009 - Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
Effective Date
19-Jan-2023

Buy Standard

prEN 598:2017prEN 598:2017
PreviousNext
Draft
prEN 598:2017
English language
75 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2017
3UHYOHþHQHFHYLILWLQJLLQVSRMLL]GXNWLOQHåHOH]RYHOLWLQH]DRGYRGQMDYDQMHLQ
NDQDOL]DFLMR.DUDNWHULVWLNHSURL]YRGDWHUPHWRGH]DSUHVNXãDQMHLQRFHQMHYDQMH
Coated and lined ductile iron pipes, fittings and their joints for sewerage and drainage
applications - Products characteristics and test and assessment methods
Umhüllte und ausgekleidete Rohre, Formstücke, Zuberhörteile aus duktilem Gußeisen
und ihre Verbindungen für Abwasser-Entsorgung - Anforderungen und Prüfverfahren
Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour
l'assainissement - Prescriptions et méthodes d'essais
Ta slovenski standard je istoveten z: prEN 598
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
23.040.40 Kovinski fitingi Metal fittings
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2017
ICS 23.040.05; 23.040.10; 23.040.40 Will supersede EN 598:2007+A1:2009
English Version
Coated and lined ductile iron pipes, fittings and their joints
for sewerage and drainage applications - Products
characteristics and test and assessment methods
Tuyaux, raccords et accessoires en fonte ductile et Umhüllte und ausgekleidete Rohre, Formstücke,
leurs assemblages pour l'assainissement - Zuberhörteile aus duktilem Gußeisen und ihre
Prescriptions et méthodes d'essais Verbindungen für Abwasser-Entsorgung -
Anforderungen und Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 203.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 598:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviations . 7
3.1 Terms and definitions . 8
3.2 Abbreviations . 12
4 Product characteristics . 12
4.1 Coated and lined ductile iron pipes . 12
4.1.1 Reaction to fire . 12
4.1.2 Longitudinal bending strength . 12
4.1.3 Internal pressure strength . 12
4.1.4 Maximum load for admissible deformation . 12
4.1.5 Dimension . 12
4.1.6 Tightness of pipes: gas and liquid . 15
4.1.7 Release of dangerous substances . 16
4.1.8 Impact resistance . 16
4.2 Coated and lined fittings and joints . 17
4.2.1 Reaction to fire . 17
4.2.2 Internal pressure strength . 17
4.2.3 Dimensions . 17
4.2.4 Tightness: gas and liquid . 17
4.2.5 Release of dangerous substances . 17
5 Testing, assessment and sampling methods . 18
5.1 Test methods for pipes . 18
5.1.1 Test for reaction to fire . 18
5.1.2 Test for longitudinal bending strength . 18
5.1.3 Test for Internal pressure strength . 19
5.1.4 Test for maximum load for admissible deformation . 20
5.1.5 Test for dimension . 23
5.1.6 Test for Tightness: gas and liquid . 24
5.1.7 Test for Release of dangerous substances . 24
5.1.8 Test for Impact resistance . 25
5.2 Test methods for fittings and joints . 26
5.2.1 Test for reaction to fire . 26
5.2.2 Test for Internal pressure strength . 26
5.2.3 Test for dimensions . 26
5.2.4 Test for Tightness: gas and liquid . 27
5.2.5 Test for Release of dangerous substances . 29
6 Assessment and verification of the constancy of performance . 29
6.1 General . 29
6.2 Type testing . 29
6.2.1 General . 29
6.2.2 Test samples, testing and compliance criteria . 31
6.2.3 Test reports . 32
6.3 Factory production control (FPC) . 32
6.3.1 General . 32
6.3.2 Requirements . 33
6.3.3 Product specific requirements . 35
6.3.4 Procedure for modifications . 35
6.3.5 One-off products, pre-production products (e.g. prototypes) and products produced
in very low quantity . 36
7 Marking, labelling and packaging . 36
Annex A (normative) Mechanical and chemical properties of linings. 38
A.1 Test results . 38
A.1.1 Abrasion resistance . 38
A.1.1.1 Cement mortar lining . 38
A.1.1.2 Alternative Linings . 38
A.1.2 Chemical resistance to effluents . 39
A.1.2.1 Test assembly . 39
A.1.2.2 Test procedure . 39
A.1.2.3 Measurements . 39
A.1.2.4 Test results . 40
A.1.2.5 Compressive strength of cement mortar lining . 40
Annex B (informative) Coatings. 41
B.1 List of most used coatings . 41
B.1.1 General . 41
B.1.2 External coating of zinc with finishing layer . 41
B.1.2.1 General . 41
B.1.2.2 Zinc mass . 41
B.1.2.3 Thickness of paint coatings . 42
B.1.2.4 External coating . 42
B.1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 16470:2013(Main)
Environmental aspects of ductile iron pipe systems for water and sewerage applications
SIST-TP CEN/TR 16470:2013

This Technical Report applies to all water and sewerage applications of ductile iron pipe systems and provides a structure on how to identify and consider environmental aspects and potential environmental impacts of ductile iron pipe systems throughout their life cycle.
This Technical Report gives guidance on how the life cycle of ductile iron pipelines should be considered in accordance with EN ISO 14044. This Technical Report also includes health and safety aspects related to the production, use and recycling of ductile iron pipe systems.

  • Technical report
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16017:2010(Main)
Guide to the use of EN 598
SIST-TP CEN/TR 16017:2010

EN 598 specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure;
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This technical report:
-   explains in more detail the process of testing for the performance tests;
-   explains in more detail the benefits of high alumina cement lining;
-   explains in more detail the definitions of the different types/levels of attestation to enable customers to ensure their requirements are fulfilled;
-   explains in more detail the ways of certification of conformity with EN 598 for a reliable evaluation of the performance of products;
-   explains in more detail CE marking and its relevance i.e. the CE mark is not a mark of conformity with a standard but only a self-declaration concerning the CPD essential requirements.
In order to make the use of this Technical Report easier, the clauses of this document refer to the corresponding clause numbers in EN 598.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 598:2007+A1:2009(Main)
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
SIST EN 598:2008+A1:2009

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure (see Table 5);
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This European Standard applies to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   normally delivered externally and internally coated;
-   suitable for continuous fluid temperatures between 0 °C excluding frost, and 45 °C for DN - 200 or 35 °C for
DN - 200, according to EN 476;
-   not intended for use in areas subject to reaction to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures.
This European Standard covers pipes, fittings and accessories cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, of a size range extending from DN 80 to DN 2000 inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this European Standard.
NOTE 2   In this European Standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 877 rev(Main)
Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance
oSIST prEN 877:2012

This European Standard applies to cast iron pipeline components used for the construction of discharge systems for buildings and of drains, normally as gravity systems. The range of nominal sizes extends from DN 40 to DN 600 inclusive. This standard specifies the requirements for the materials, dimensions and tolerances, mechanical properties, appearance, standard coatings  and quality assurance for cast iron pipes, fittings and accessories. It also indicates performance requirements for all components, including joints.

  • Draft
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1124-2:2014(Main)
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S, forms and dimensions
SIST EN 1124-2:2014

This European Standard applies to pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems and specifies dimensions and tolerances for pipes, fittings and pipe connectors and establishes a system of designations for the different pipe and fitting types that conform to the stated requirements.
This part of EN 1124 is only valid in connection with EN 1124 1.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1124-4:2013(Main)
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships
SIST EN 1124-4:2013

This European Standard specifies requirements, dimensions and tolerances for pipes and fittings of longitudinally welded, stainless steel pipe with spigot and socket used for vacuum drainage systems inside and outside buildings and for gravity and vacuum drainage systems on ships and floating maritime structures ) :
-   above freeboard deck as long as the heeling is taken into account in the event of damage when installed above freeboard deck on passenger ships;
-   inside a watertight compartment below freeboard deck;
-   with direct connection to the outboard (not permitted below freeboard deck);
-   inside tanks as long as these are not filled with foreign media and are not cargo tanks.
On well-anchored maritime structures, this European Standard applies to pipes and fittings of longitudinally welded stainless steel pipe with spigot and socket used in drainage systems in the accommodation area.
Pipes and fittings according to this European Standard may also be used in central vacuum cleaning installations, in vacuum suction lifting installations, in chip transporting installations and in other waste water and process pipes as long as the media to be discharged do not damage the components or the health and safety of the personnel.
For other pipes, this European Standard only applies if agreed with the relevant operators and following prior consultation with the manufacturer.
This European Standard contains a designation system for the different types of pipes and fittings for easy identification of each component.
This European Standard is only applicable in conjunction with EN 1124-1.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16470:2013(Main)
Environmental aspects of ductile iron pipe systems for water and sewerage applications
SIST-TP CEN/TR 16470:2013

This Technical Report applies to all water and sewerage applications of ductile iron pipe systems and provides a structure on how to identify and consider environmental aspects and potential environmental impacts of ductile iron pipe systems throughout their life cycle.
This Technical Report gives guidance on how the life cycle of ductile iron pipelines should be considered in accordance with EN ISO 14044. This Technical Report also includes health and safety aspects related to the production, use and recycling of ductile iron pipe systems.

  • Technical report
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16017:2010(Main)
Guide to the use of EN 598
SIST-TP CEN/TR 16017:2010

EN 598 specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure;
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This technical report:
-   explains in more detail the process of testing for the performance tests;
-   explains in more detail the benefits of high alumina cement lining;
-   explains in more detail the definitions of the different types/levels of attestation to enable customers to ensure their requirements are fulfilled;
-   explains in more detail the ways of certification of conformity with EN 598 for a reliable evaluation of the performance of products;
-   explains in more detail CE marking and its relevance i.e. the CE mark is not a mark of conformity with a standard but only a self-declaration concerning the CPD essential requirements.
In order to make the use of this Technical Report easier, the clauses of this document refer to the corresponding clause numbers in EN 598.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 598:2007+A1:2009(Main)
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
SIST EN 598:2008+A1:2009

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
-   operating without pressure (gravity sewerage), or with positive or negative pressure (see Table 5);
-   to be installed below or above ground;
-   to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This European Standard applies to pipes, fittings and accessories which are:
-   manufactured with socketed, flanged or spigot ends;
-   normally delivered externally and internally coated;
-   suitable for continuous fluid temperatures between 0 °C excluding frost, and 45 °C for DN - 200 or 35 °C for
DN - 200, according to EN 476;
-   not intended for use in areas subject to reaction to fire regulations.
NOTE 1   This does not preclude special arrangements for the products to be used at higher temperatures.
This European Standard covers pipes, fittings and accessories cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, of a size range extending from DN 80 to DN 2000 inclusive.
This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this European Standard.
NOTE 2   In this European Standard, all pressures are relative pressures, expressed in bars (100 kPa = 1 bar).

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1124-3:2008(Main)
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X - Dimensions
SIST EN 1124-3:2009

This European Standard is applicable to pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems.
It specifies dimensions and tolerances for pipes, fittings, pipe connectors and seals of the System X and establishes a system of designations for the different pipe and fitting types that conform to the stated requirements.
NOTE   System X is a system of pipes and fittings of longitudinally welded stainless steel pipes with two-step sockets.
This European Standard is only valid in connection with EN 1124-1. This European Standard does not apply to the marking of products. EN 1124-1/A1 applies to the marking.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day