EN 13877-2:2004

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.þDFahrbahnbefestigungen aus Beton - Teil 2: Funktionale Anforderungen an Fahrbahnbefestigungen aus BetonChaussées en béton - Partie 2 : Exigences fonctionnelles pour les chaussées en bétonConcrete pavements - Part 2: Functional requirements for concrete pavements93.080.20Materiali za gradnjo cestRoad construction materials91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 13877-2:2004SIST EN 13877-2:2005en01-januar-2005SIST EN 13877-2:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13877-2August 2004ICS 93.080.20English versionConcrete pavements - Part 2: Functional requirements forconcrete pavementsChaussées en béton - Partie 2 : Exigences fonctionnellespour les chaussées en bétonFahrbahnbefestigungen aus Beton - Teil 2: FunktionaleAnforderungen an Fahrbahnbefestigungen aus BetonThis European Standard was approved by CEN on 24 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13877-2:2004: ESIST EN 13877-2:2005

Method of evaluating concrete core strength.12 Annex B (normative)
Functional requirements for penetration in pavements with high risk of exposure to fuel, oil and other chemical liquids.13
prEN 13877-1, Concrete pavements — Part 1: Materials. SIST EN 13877-2:2005

is the required bond strength, expressed in Newton per square millimetres (N/mm²) sn
is the standard deviation; a value of 0,4 shall be used if sn < 0,4 4 Functional requirements for concrete pavements 4.1 General The appropriate functional requirements shall be specified. Jointed unreinforced concrete pavements shall not have visible cracks. 4.2 Strength of concrete pavements 4.2.1 General The strength of a concrete pavement shall be determined from cores, which have been cut from the full depth of the slab. The concrete strength shall be determined in accordance with one of the methods given in 4.2.2 and 4.2.3. The strength class shall be selected
...