EN 15167-2:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluationGrobozrnata plavžna žlindra za uporabo v betonu, malti in injekcijski malti – 2. del. Ovrednotenje skladnostiLaitier granulé de haut-fourneau moulu pour utilisation dans le béton, mortier et coulis - Partie 2: Evaluation de la conformitéHüttensandmehl zur Verwendung in Beton, Mörtel und Einpressmörtel - Teil 2: KonformitätsbewertungTa slovenski standard je istoveten z:EN 15167-2:2006SIST EN 15167-2:2006en91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:SLOVENSKI
STANDARDSIST EN 15167-2:200601-december-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15167-2August 2006ICS 91.100.15 English VersionGround granulated blast furnace slag for use in concrete, mortarand grout - Part 2: Conformity evaluationLaitier granulé de haut-fourneau moulu pour utilisation dansle béton, mortier et coulis - Partie 2: Evaluation de laconformitéHüttensandmehl zur Verwendung in Beton, Mörtel undEinpressmörtel - Teil 2: KonformitätsbewertungThis European Standard was approved by CEN on 26 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15167-2:2006: E

Evaluation of the representativeness and the accuracy of the 28 day activity index test results.22 A.1 General.22 A.2 Sets of results considered.22 A.3 Evaluation procedure.22 A.3.1 Introduction.22 A.3.2 Symbols.22 A.3.3 Evaluation of whether set A and set B belong to the same population (sampling error check).23 A.3.4 Comparison between set B and set C in order to check the accuracy of the autocontrol testing (testing error check).23 Bibliography.24

This testing corresponds also to the “further testing of samples” mentioned in Annex III Section 2 point (i) of the Construction Products Directive 89/106/EEC.
3.2 certificate of conformity document issued under the rules of a certain scheme for the evaluation of conformity indicating that adequate confidence is provided that ground granulated blastfurnace slag is in conformity with
EN 15167-1 3.3 certification procedure by which a third party gives written assurance that a product, process or service conforms to specified requirements [EN 45020:1998]

EN 15167-1 4 Tasks for the manufacturer 4.1 Factory production control 4.1.1 Concept Production control means the permanent internal control of ground granulated blastfurnace slag production exercised by the manufacturer and consists of internal quality control (see 4.2) and autocontrol testing1) of samples of ground granulated blastfurnace slag taken at the point of release (see 4.3). NOTE The requirements of EN 15167-2 as regards the production control take account of those clauses of EN ISO 9001 which are relevant to the production, process control and testing of ground granulated blastfurnace slag. 4.1.2 Works' quality manual The manufacturer's documentation and procedures for the production control shall be described in a Works' quality manual, which shall adequately describe, among other things: a) the quality aims and the organisational structure, responsibilities and powers of the responsible staff with regard to product quality and the means to monitor the achievement of the required product quality and the effective operation of the internal quality control (see 4.1.3);
1) This testing corresponds also to the "further testing of samples" mentioned in Annex III Section 2 point (i) of the Construction Products Directive 89/106/EEC.

management review of the production control, taking into account records of the internal audits. 4.1.3.3 Training The Works' quality manual shall describe the measures taken to ensure that all the personnel involved in operations that can affect internal quality control and product quality have appropriate experience or training. Appropriate records shall be retained. 4.1.4 System of documentation 4.1.4.1 Document control The management representative of the manufacturer shall be responsible for the control of all documents and data related to the production control and to this scheme for the evaluation of conformity. This control shall ensure that the appropriate issues of all documents are available at essential locations, that obsolete documents are withdrawn and that changes or modifications to any document are effectively introduced.

Clause 8 of EN 15167-1:2006. The properties to be tested, the testing methods, the minimum frequency of autocontrol testing during routine testing and initial period of testing and the conformity criteria shall be in accordance with the requirements given in Clause 8 of EN 15167-1:2006. For ground granulated blastfurnace slags not being dispatched continuously, the frequency of testing and the point of sampling shall be as specified in the Works' quality manual. All test data shall be documented. 4.3.2 Corrective action The Works' quality man
...