iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12423:1999

(Main)

Polypropylene twines

Polypropylene twines

This European standard specifies requirements for twines made from polypropylene. It specifies the methods for their manufacture, their physical characteristics, as well as describing test methods to verify these characteristics. This standard allows ultra violet high inhibitors to be added but does not require them to be added. Requirements for the commercial presentation of twines are also specified. This standard does not specify requirements for agricultural twines made of polyolefin, which are covered according to EN 906:1996.

Polypropylen-Bindegarne

Diese Europa(ische Norm legt Anforderungen an Polypropylen-Bindegarne fest. Sie legt die Verfahren der Herstellung, ihre physikalischen Eigenschaften sowie die Pru(fverfahren und Verfahren zur Anpassung dieser Eigenschaften fest. Diese Norm erlaubt den Zusatz von UV-Inhibitoren, verlangt aber des Zusatz nicht. Die Anforderungen fu(r die handelsu(bliche Aufmachung der Bindegarne wird ebenfalls festgelegt. Diese Norm legt nicht die Anforderungen an Polyolefin-Erntegarne fest, die nach EN 906:1996 festgelegt sind.

Ficelles polypropylène

La présente norme européenne fixe les exigences des ficelles en polypropylène. Elle précise les méthodes de fabrication, leurs caractéristiques physiques et $ définit les méthodes d'essai pour les vérifier. Cette norme prévoit que puissent être ajoutés des inhibiteurs ultra-violet mais ne les exige pas. Elle précise également la désignation commerciale des ficelles. La présente norme européenne ne fixe pas les exigences des ficelles agricoles en polyoléfine qui sont spécifiées selon l'EN 906:1996.

Polipropilenske povezne vrvice

General Information

Status
Published
Publication Date
20-Apr-1999
Withdrawal Date
30-Oct-1999
ICS
59.080.20 - Yarns
Technical Committee
CEN/TC 248 - Textiles and textile products
Drafting Committee
CEN/TC 248 - Textiles and textile products
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
08-Jul-2023
Ref Project
SIST EN 12423:1999 - Polypropylene twines

Buy Standard

EN 12423:1999EN 12423:1999
PreviousNext
Standard
EN 12423:1999
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Polipropilenske povezne vrvicePolypropylen-BindegarneFicelles polypropylenePolypropylene twines59.080.20PrejeYarnsICS:Ta slovenski standard je istoveten z:EN 12423:1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 2061:2015(Main)
Textiles - Determination of twist in yarns - Direct counting method (ISO 2061:2015)
SIST EN ISO 2061:2015

ISO 2061:2015 specifies a method for the determination of the direction of twist in yarns, the amount of twist, in terms of turns per unit length, and the change in length on untwisting, by the direct counting method.
This International Standard is applicable to
a)    single yarns (spun and filament),
b)    plied yarns, and
c)    cabled yarns.
Separate procedures are given for each type of yarn. The method is designed primarily for yarns in packages, but, with special precautions, the procedures can be used for yarns taken from fabrics. It is not suitable for the determination of twist in a monofilament.
NOTE          See also ISO 1890, which was prepared especially for the needs of glass textile technology, and ISO 7211‑4.
ISO 2061:2015 covers the determination of twist in plied and cabled yarns as follows:
a)    in plied yarns: the final twist of the plied yarns and the original twist of the single yarn before plying;
b)    in cabled yarns:
?   the final cabling twist of the yarn;
?   the original twist of the plied yarn after plying, but prior to the last stage of processing;
?   the twist of the single yarn before plying.
If desired, the twist of single and plied yarn components, as they lie in the final structure, can be determined by the special procedure given in 10.5.7.
ISO 2061:2015 is not applicable, except by agreement, to yarns which stretch more than 0,5 % when the tension increases from 0,5 cN to 1,0 cN per unit linear density of the yarn expressed in tex. Such yarns can be tested under special conditions of tension which are accepted by all parties interested in the test results.
ISO 2061:2015 is not suitable for products of open-end spinning and intermingled (interlaced) multifilament yarns.
ISO 2061:2015 is not applicable to yarns which are too large to permit their being placed in the clamps of the testing apparatus without crushing or distortion severe enough to affect the test results.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2062:2009(Main)
Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester (ISO 2062:2009)
SIST EN ISO 2062:2010

ISO 2062:2009 specifies methods for the determination of the breaking force and elongation at break of textile yarns taken from packages.
Four methods are given:
A: manual; specimens are taken directly from conditioned packages;
B: automatic; specimens are taken directly from conditioned packages;
C: manual; relaxed test skeins are used after conditioning;
D: manual; specimens are used after wetting.
Method C is used in cases of dispute regarding elongation at break of the yarn.
ISO 2062:2009 specifies methods using constant rate of specimen extension (CRE) tensile testers. Testing on the now obsolete constant rate of travel (CRT) and constant rate of loading (CRL) instruments is covered, for information, in Annex A, in recognition of the fact that these instruments are still in use and can be used by agreement.
ISO 2062:2009 applies to all types of yarns, except glass, elastomeric, aramid, high molecular polyethylene (HMPE), ultra high molecular polyethylene (UHMPE), ceramic and carbon yarns and polyolefin tape.
ISO 2062:2009 is applicable to yarns from packages but can be applied to yarns extracted from fabrics, subject to agreement between the interested parties.
ISO 2062:2009 is intended for the single-end (single-strand) testing of yarns.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14621:2005(Main)
Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
SIST EN 14621:2006

This European Standard specifies test methods for quality control of textured and non textured multifilament synthetic yarns. It includes the following test methods:
-   determination of the crimp contraction - textured multifilament yarn with linear density up to 500 dtex;
-   determination of the hot air shrinkage - for non textured and textured multifilament yarns;
-   determination of the boiling water shrinkage - for non textured and textured multifilament yarns.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13936-2:2004(Main)
Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method (ISO 13936-2:2004)
SIST EN ISO 13936-2:2004

ISO 13936-2:2004 is intended for the determination of the resistance offered by thread systems of woven fabric, to slippage at a sewn seam.
The method described is suitable for all apparel and upholstery woven fabrics, stretch fabrics (including those containing elastomeric yarn).

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13936-1:2004(Main)
Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 1: Fixed seam opening method (ISO 13936-1:2004)
SIST EN ISO 13936-1:2004

ISO13936-1:2004 is intended for the determination of the resistance offered by thread systems of woven fabric, to slippage at a sewn seam.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13895:2003(Main)
Textiles - Monofilaments - Determination of tensile properties
SIST EN 13895:2003

This draft European Standard specifies a method for the determination of tensile properties of monofilaments and specifies test requirements in addition where needed.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12590:1999(Main)
Textiles - Industrial sewing threads made wholly or partly from synthetic fibres
SIST EN 12590:2000

This European Standard specifies requirements for industrial sewing threads made wholly or partly from synthetic fibres. It specifies requirements for industrial sewing threads  based on breaking force in relation to the thread size. For threads which are for use in the garment trade it also specifies colour fastness and boiling water shrinkage requirements. It deals with industrial sewing threads made from the following substrates and combinations of substrates: a) Continuous filament polyester; b) Staple fibre polyester; c) Air-Jet textured polyester (see 3.3); d) False twist textured polyester (see 3.4);...

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12751:1999(Main)
Textiles - Sampling of fibres, yarns and fabrics for testing
SIST EN 12751:1999

This European Standard specifies several methods for preparing laboratory samples of fibres, yarns or fabrics and presents a limited treatment of the problem of drawing specimens for testing. The principle of each method is given at the beginning of the clause dealing with the method. It is not possible for the coverage of each individual procedure to be fully comprehensive; in many instances, the selection of test samples or test specimens is necessarily covered by the appropriate method of test.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12562:1999(Main)
Textiles - Para-aramid multifilament yarns - Test methods
SIST EN 12562:1999

This standard specifies test methods applicable for para-aramid filament yarns designed for high performance applications. It applies to para-aramid filament yarns for cables, ropes, belts, braids and fabrics as used for sports, protec- tive and industrial textile applications, reinforced rubber goods, tires etc. It is not applicable for para-aramid filament yarns for fibre reinforced composites.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12422:1999(Main)
Sisal twines
SIST EN 12422:1999

This European standard specifies the essential characteristics of sisal twines. It specifies the way they are manufactured, methods for testing and the manner in which they are designated and presented commercially. This standard does not specify agricultural twines which are made from sisal. These twines are specified according to EN 25080:1993.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day