EN 13895:2003

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tekstilije - Monofilamenti - Ugotavljanje nateznih lastnostiTextilien - Monofilamente - Bestimmung der ZugdehnungseigenschaftenTextiles - Monofilaments - Détermination des propriétés en tractionTextiles - Monofilaments - Determination of tensile properties59.060.20Umetna vlaknaMan-made fibresICS:Ta slovenski standard je istoveten z:EN 13895:2003SIST EN 13895:2003en01-junij-2003SIST EN 13895:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13895March 2003ICS 59.080.20English versionTextiles - Monofilaments - Determination of tensile propertiesTextiles - Monofilaments - Détermination des propriétés entractionTextilien - Monofilamente - Bestimmung derZugdehnungseigenschaftenThis European Standard was approved by CEN on 21 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13895:2003 ESIST EN 13895:2003

Force - Elongation curve.10Annex B (informative)
Principle of the bollard type clamp.11Annex C (informative)
Recommended conditioning time versus diameter for moisture sensitivepolymeric types.12Annex D (Informative).13SIST EN 13895:2003

In bollard or capstan clamps, it isthe distance between their gripping points, measured along the path of the monofilament3.4constant rate of extension (CRE) dynamometertensile testing machine where one clamp is stationary and the other is moving with a constant speed throughout thetest, and where the entire testing system is virtually free from deflection3.5clampsparts of the testing device which are used to grip the specimen by means of suitable jaws3.6jawselements of a clamp which grip the specimen without damaging it and which prevent slippage during the test3.7packagemethod of presentation of the monofilament, e.g. spool, tube, coneSIST EN 13895:2003

expressed as a percentage ofthe gauge length3.8.3force at breakfinal force at the moment that the specimen breaks into two parts after attainment of the maximum forceNOTEThe force at break is usually, but not always, identical with the maximum force.3.8.4elongation at breakincrease in length of a specimen at break expressed as a percentage of the initial length3.8.5force at specified elongation (FASE)force associated with a specified elongation on the force-elongation curve3.8.6elongation at specified force (EASF)increase in length of a test specimen produced by a specified force3.8.7tenacitymaximum force divided by the actual linear density measured (according to EN 13392) before the test3.8.8tenacity at specif
...