EN ISO 14451-3:2013

SLOVENSKI STANDARD
01-maj-2013
3LURWHKQLþQLL]GHONL3LURWHKQLþQLL]GHONL]DYR]LODGHO2]QDþHYDQMH,62

Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 3: Labelling (ISO 14451-
3:2013)
Pyrotechnische Gegenstände - Pyrotechnische Gegenstände für Fahrzeuge - Teil 3:
Kennzeichnung (ISO 14451-3:2013)
Articles pyrotechniques - Articles pyrotechniques pour véhicules - Partie 3: Étiquetage
(ISO 14451-3:2013)
Ta slovenski standard je istoveten z: EN ISO 14451-3:2013
ICS:
43.040.99 Drugi sistemi za cestna Other road vehicle systems
vozila
71.100.30 Eksplozivi. Pirotehnika Explosives. Pyrotechnics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 14451-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2013
ICS 43.040.80
English Version
Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 3:
Labelling (ISO 14451-3:2013)
Articles pyrotechniques - Articles pyrotechniques pour Pyrotechnische Gegenstände - Pyrotechnische
véhicules - Partie 3: Étiquetage (ISO 14451-3:2013) Gegenstände für Fahrzeuge - Teil 3: Kennzeichnung (ISO
14451-3:2013)
This European Standard was approved by CEN on 9 February 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14451-3:2013: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EC Directive 2007/23/EC on the placing on the market of pyrotechnic
articles .4

Foreword
This document (EN ISO 14451-3:2013) has been prepared by Technical Committee CEN/TC 212
“Pyrotechnic articles” the secretariat of which is held by NEN, in collaboration with Technical Committee
ISO/TC 22 "Road vehicles".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2013, and conflicting national standards shall be
withdrawn at the latest by September 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14451-3:2013 has been approved by CEN as EN ISO 14451-3:2013 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EC Directive 2007/23/EC on the placing on the market
of pyrotechnic articles
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 2007/23/EC on the placing on the market of pyrotechnic articles.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of
conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Directive 2007/23/EC on the
placing on the market of pyrotechnic articles (1 of 2)
Clause(s)/sub-clause(s) of this Essential Safety Requirements
Qualifying remarks/Notes
document (ESRs) of the Directive 2007/23/EC
(1) Not applicable
(2) See ISO 14451-2
(3) 1st sentence Not applicable
(3) 2nd and 3rd sentences Not applicable
(3a) Not applicable
(3b) Not applicable
(3c) Not applicable
(3d) Not applicable
(3e) Not applicable
(3f) Not applicable
(3g) Not applicable
4.4 (3h) See also ISO 14451-2
(3i) Not applicable
(3j) Not applicable
(3) Last sentence Not applicable
(4a) Not applicable
(4b) Not applicable
(5 B.1) Not applicable
(5 B.2) Not applicable
(5 B.3) Not applicable
Table ZA.1 — (2 of 2)
Clause(s)/sub-clause(s) of this Essential Safety Requirements
Qualifying remarks/Notes
document (ESRs) of the Directive 2007/23/EC
(5 B.4) Not applicable
(5 C.1) to (5 C.5) Not applicable
4.4 (5 C.6) See also ISO 14451-2
(5 C.7) Not applicable
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this part of EN ISO 14451.

INTERNATIONAL ISO
STANDARD 14451-3
First edition
2013-03-15
Pyrotechnic articles — Pyrotechnic
articles for vehicles —
Part 3:
Labelling
Articles pyrotechniques — Articles pyrotechniques pour véhicules —
Partie 3: Étiquetage
Reference number
ISO 14451-3:2013(E)
©
ISO 2013
ISO 14451-3:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, inclu
...