iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 912:1999

(Main)

Timber fasteners - Specifications for connectors for timber

Timber fasteners - Specifications for connectors for timber

This European Standard was prepared by CEN/TC 124, Timber Structures. This standard is one of a series of standards for building materials. It was prepared by a working group under the convenorship of Deutsches Institut für Normung e.V. (DIN) No existing European Standard is superseeded. This standard includes for Annexes concerning the specifications for different types of ring, plate, toothed-plate and other connectors. The standard contains only well-established connectors which are currently covered by existing National Standards.

Holzverbindungsmittel - Spezifikationen für Dübel besonderer Bauart für Holz

Diese Norm legt die Maße und Werkstoffe bestimmter bestehender Dübel besonderer Bauart für Verbindungen in tragenden Holzkonstruktionen fest. Hinsichtlich der Werte für die Tragfähigkeits- und Verformungseigenschaften von Verbindungen mit den Dübeln besonderer Bauart wird auf pr 13271 verwiesen.

Organes d'assemblage pour le bois - Spécifications des connecteurs pour bois

Le présente norme définit les dimensions et les matériaux de certains connecteurs largement utilisés dans les assemblages de structures en bois porteuses. Pour les données sur les propriétés de résistance et de déformation d'assemblages réalisés avec les connecteurs se référer à la norme prEN 13271.

Vezna sredstva za les - Specifikacije za moznike za les

General Information

Status
Withdrawn
Publication Date
21-Sep-1999
Withdrawal Date
12-Jul-2011
ICS
21.060.99 - Other fasteners
91.080.20 - Timber structures
Technical Committee
CEN/TC 124 - Timber structures
Drafting Committee
CEN/TC 124/WG 4 - Connectors
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
13-Jul-2011
Completion Date
13-Jul-2011
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/112 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural timber products
Ref Project
SIST EN 912:2000 - Timber fasteners - Specifications for connectors for timber

Relations

Replaced By
EN 912:2011 - Timber fasteners - Specifications for connectors for timbers
Effective Date
16-Jul-2011
Corrected By
EN 912:1999/AC:2000 - Timber fasteners - Specifications for connectors for timber
Effective Date
08-Jun-2022

Buy Standard

EN 912:2000EN 912:2000
PreviousNext
Standard
EN 912:2000
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 912:2000
01-april-2000
Vezna sredstva za les - Specifikacije za moznike za les
Timber fasteners - Specifications for connectors for timber
Holzverbindungsmittel - Spezifikationen für Dübel besonderer Bauart für Holz
Organes d'assemblage pour le bois - Spécifications des connecteurs pour bois
Ta slovenski standard je istoveten z: EN 912:1999
ICS:
21.060.99 Drugi vezni elementi Other fasteners
91.080.20 Lesene konstrukcije Timber structures
SIST EN 912:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 912:2000

---------------------- Page: 2 ----------------------

SIST EN 912:2000

---------------------- Page: 3 ----------------------

SIST EN 912:2000

---------------------- Page: 4 ----------------------

SIST EN 912:2000

---------------------- Page: 5 ----------------------

SIST EN 912:2000

---------------------- Page: 6 ----------------------

SIST EN 912:2000

---------------------- Page: 7 ----------------------

SIST EN 912:2000

---------------------- Page: 8 ----------------------

SIST EN 912:2000

---------------------- Page: 9 ----------------------

SIST EN 912:2000

---------------------- Page: 10 ----------------------

SIST EN 912:2000

---------------------- Page: 11 ----------------------

SIST EN 912:2000

---------------------- Page: 12 ----------------------

SIST EN 912:2000

---------------------- Page: 13 ----------------------

SIST EN 912:2000

---------------------- Page: 14 ----------------------

SIST EN 912:2000

---------------------- Page: 15 ------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 912:2011(Main)
Timber fasteners - Specifications for connectors for timbers
SIST EN 912:2012

This European Standard specifies the dimensions and the materials of certain well-established connectors for use in joints between members in load-bearing timber structures.
For data on strength and deformation properties of joints made with the connectors, reference is given to EN 13271.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 912:2011(Main)
Timber fasteners - Specifications for connectors for timbers
SIST EN 912:2012

This European Standard specifies the dimensions and the materials of certain well-established connectors for use in joints between members in load-bearing timber structures.
For data on strength and deformation properties of joints made with the connectors, reference is given to EN 13271.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12625-5:2024(Main)
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2024)
SIST EN ISO 12625-5:2024

This document specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation.
Currently, two types of tensile-strength-testing apparatus are commercially available, one where the test piece is positioned vertically and, for the other, horizontally. This document applies for both. For vertical tensile-strength-testing apparatus, a device that is held in the lower grip of the tensile-strength-testing apparatus, called a Finch Cup, is used to achieve the wetting. For horizontal tensile-strength-testing apparatus, the soaking device is placed between the two clamps.
This document is not applicable to cases where impurities and contraries are determined.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 5601:2024(Main)
Paints and varnishes - Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content - Best practices for the selection of test methods (ISO/TR 5601:2023)
kSIST-TP FprCEN ISO/TR 5601:2024

This document aims to enable users to identify an appropriate method for the determination of volatile organic compounds (VOC) content and/or the semi-volatile organic compounds (SVOC) content of coating materials and their raw materials. This document provides a step-by-step procedure for identifying appropriate tests. This document is intended to be used in conjunction with ISO 11890-1, ISO 11890-2 and ISO 17895, to help users select an appropriate analytical method for their analytical problem.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12662-1:2024(Main)
Liquid petroleum products - Determination of total contamination - Part 1: Middle distillates and diesel fuels
kSIST FprEN 12662-1:2024

This document specifies a method for the determination of the content of undissolved substances, referred to as total contamination, in middle distillates, in diesel fuels containing up to 30 % (V/V) fatty acid methyl esters (FAME). The working range is from 12 mg/kg to 26 mg/kg and it was established in an interlaboratory study by applying EN ISO 4259-1 [4].
This document in general is applicable to products having a kinematic viscosity not exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C.
This test method can be used for paraffinic diesel fuels as specified in EN 15940, for diesel fuels containing more than 30 % (V/V) FAME and for petroleum products having a kinematic viscosity exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, however in such cases the precision of the test method has not been determined.
NOTE   For the purposes of this document, the term “% (V/V)” is used to represent the volume fraction, φ, of a material.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17830:2024(Main)
Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2024)
kSIST FprEN ISO 17830:2024

This document specifies the requirements and method used to determine particle size distribution of disintegrated pellets. It is applicable for pellets that fully disintegrate in hot water.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17827-2:2024(Main)
Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2024)
kSIST FprEN ISO 17827-2:2024

This document specifies a method for the determination of the size distribution of particulate biofuels by the vibrating screen method. The method described is meant for particulate biofuels only, namely, materials that either have been reduced in size, such as most wood fuels, or are physically in a particulate form. This document applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and below (e.g. sawdust).

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12662-2:2024(Main)
Liquid petroleum products - Determination of total contamination - Part 2: Fatty acid methyl esters
kSIST FprEN 12662-2:2024

This document specifies a method for the determination of the content of undissolved substances, referred to as total contamination, in neat fatty acid methyl esters (FAME). The working range is from 5 mg/kg to 27 mg/kg and it was established in an interlaboratory study by applying EN ISO 4259-1 [1].
This document in general is applicable to FAME having a kinematic viscosity not exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, e.g. as specified in EN 14214 [2].
This test method can be used for FAME having a kinematic viscosity exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, however in such cases the precision of the test method has not been determined.
NOTE   For the purposes of this document, the term “% (V/V)” is used to represent the volume fraction, φ, of a material.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17952:2024(Main)
Value Management - Function Analysis: Basic characteristics, requirements and guidance for implementation
SIST EN 17952:2024

This document presents Function Analysis (FA) and specifies requirements for Function Analysis and its deliverables. It presents the two distinct areas of application, namely, Functional Need Analysis (FNA) relating to understanding the need, setting goals and Technical Function Analysis (TFA) relating to selecting and developing a solution. It specifies requirements for the basic characteristics of the deliverables within FNA and TFA and expands requirements, guidance and recommendations about FA expressed in the Functional Performance Specification Standard (EN 16271) and in the Value Management Standard (EN 12973).
This document provides an essential reference and support for any person wishing to improve the efficiency, effectiveness and overall performance of their organization. It aims to support sustainable development in an organization. FA offers an opportunity to enhance skills of people involved.
In order to present the conditions for implementation and development of FA deliverables, this document:
•   introduces the interests and fields of application and presents a variety of situations in which FA is used in support of projects of all types and sizes;
•   specifies essential conditions for successful FA, including roles and responsibilities of the people involved, monitoring the performance of the FA team, processes for validation and verification and supply of valid and verified deliverables; and
•   specifies requirements for FA and the basic characteristics of FA deliverables whilst outlining methods, and tools for the realization of the deliverables.
FA is progressed using the following:
•   FNA: support for the process of identifying and understanding the need, defining objectives, and setting the goal to be achieved;
•   TFA: support for design or research processes and evaluation of solutions; and
•   Iteratively focusing on the FNA and TFA by revisiting the identified need, balancing capabilities of available technologies, resources and constraints, achieving the most desirable outcome.
In the area of FNA, this document sets out FNA requirements for the deliverables to establish the Functional Need Expression (FNE). The FNE can serve as a basis for establishing an understanding of the expressed need, the complete list of User Related Functions (URFs), constraints and interfaces. These deliverables serve as a basis for identifying, organizing, characterizing and prioritizing functions and function interfaces. These deliverables can also support preliminary risk and reliability studies, economic studies, impact assessments and development of Functional Performance Specifications (FPSs).
In the area of TFA, this document sets out requirements for TFA deliverables which aim to satisfy the need, expressed in the FNE. The TFA deliverables are focused on analysing existing and potential solutions, identifying a complete list of the Product Related Functions (PRFs) to meet the FNE; evaluating concepts and making a choice for a solution then optimizing the Product Function Architecture (PFA) to identify the “best” solution.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17956:2024(Main)
Energy efficiency classes for technical insulation systems - Calculation method and applications
SIST EN 17956:2024

This document is applicable to technical insulation systems of operational installations in industry and the building services, such as pipes, ducts, vessels, equipment and built-in components.
The document specifies methods for the energy efficiency classification of insulation systems for the abovementioned components with an operational temperature range of −30 °C up to 650 °C.
The document addresses plant operators, engineers of operational installations, as well as the involved contractors such as insulation contractors and pipefitting contractors.
The design of safe surface temperatures for personal protection, as well as the prevention of condensation, is outside the scope of this document.
This document also does not apply to water-based heating and cooling systems in buildings and does not apply to directly buried district heating and district cooling pipes.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day