EN 12482-2:1998
(Main)Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock
Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock
This part of prEN 12482 specifies the particular requirements for wrought aluminium and aluminium alloys in the form of hot rolled strip. The thickness range covered is over 0,20 mm to 4 mm. It does not apply to cold rolled strip which are not rerolled such as strip for general engineering or special applications.
Aluminium und Aluminiumlegierungen - Vorwalzband für allgemeine Anwendungen - Teil 2: Spezifikationen für kaltegewalztes Vorwalzband
Dieser Teil von prEN 12482 legt die speziellen Anforderungen für kaltgewalztes Vorwalzband aus Aluminium und Aluminium-Knetlegierungen fest. Er gilt für Dicken größer 0,2 mm bis 4 mm. Er gilt nicht für kaltgewalzte Bänder, die nicht weitergewalzt werden, wie z. B. Bänder für allgemeine Anwendungen oder Sonderanwendungen.
Aluminium et alliages d'aluminium - Ebauches de relaminage pour applications générales - Partie 2: Spécifications pour ébauches obtenues par laminage à froid
La présente partie du prEN 12482 spécifie les prescriptions particulières pour les aluminium de corroyage et alliages d'aluminium sous forme de bande laminée à froid. La plage d'épaisseur couverte est comprise à partir de 0,20 mm jusqu'à 4 mm. Cette dernière ne s'applique pas aux bandes laminées à froid qui ne sont pas relaminées, telles que les bandes pour applications générales ou spéciales.
Aluminij in aluminijeve zlitine - Predvaljani trakovi za splošno uporabo - 2. del: Specifikacije za hladno valjane trakove, ki so bili predvaljani
General Information
- Status
- Published
- Publication Date
- 21-Jul-1998
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- WG 36 - Rolled products
- Current Stage
- 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
- Start Date
- 02-Dec-2024
- Completion Date
- 02-Dec-2024
Relations
- Effective Date
- 22-Dec-2008
Overview
EN 12482-2:1998 is a European standard developed by the Comité Européen de Normalisation (CEN) that specifies key requirements for cold rolled reroll stock made from aluminium and aluminium alloys. This part of the standard addresses the technical specifications for wrought aluminium products in the form of hot rolled strips that are subsequently cold rolled, specifically targeting a thickness range over 0.20 mm up to 4 mm. Importantly, the standard excludes cold rolled strips that are not rerolled, such as those intended for general engineering or specialized applications.
This standard ensures consistent quality and performance characteristics for aluminium reroll stock used in various industrial sectors, supporting manufacturers and engineers in producing reliable aluminium components.
Key Topics
Scope and Thickness Range
Specifies cold rolled reroll stock thickness between 0.20 mm and 4 mm.Material Specifications
Covers wrought aluminium and aluminium alloy compositions suitable for rerolling.Surface and Mechanical Properties
Defines requirements for surface finish and mechanical properties tailored to cold rolled aluminium reroll stock.Exclusions
Clarifies that it does not apply to cold rolled strips not destined for rerolling, including strips used for general engineering or special applications.Manufacturing Process Control
Establishes acceptable practices and quality control parameters for the cold rolling of reroll stock.
Applications
The specifications outlined in EN 12482-2:1998 are critical for industries relying on aluminium reroll stock, including:
Automotive Manufacturing
Production of lightweight components requiring precise thickness and material properties.Aerospace Components
Parts where dimensional accuracy and material integrity are essential.Building and Construction
Use in architectural elements, cladding, and structural components.Electrical and Engineering Industries
Manufacture of conductive and mechanical parts where aluminium qualities are critical.Packaging Industry
Production of rerolled aluminium strips for packaging applications that demand high-quality material properties.
Using this standard aids in maintaining product uniformity and ensuring compatibility across applications that rely on cold rolled reroll aluminium stock.
Related Standards
To complement EN 12482-2:1998, the following standards may be relevant:
EN 12482-1 - Aluminium and aluminium alloys – Reroll stock for general applications – Part 1: Specifications for hot rolled reroll stock.
EN 485 Series - Aluminium and aluminium alloys - Sheet, strip and plate.
EN 573 - Aluminium and aluminium alloys - Chemical composition and forms of products.
ISO 6361 - Aluminium and aluminium alloys – Wrought products – Temper designations.
These related standards provide additional guidance on chemical composition, mechanical properties, and processing methods for aluminium products.
By adhering to EN 12482-2:1998, manufacturers and engineers can ensure that aluminium cold rolled reroll stock meets rigorous quality and performance requirements, promoting enhanced product reliability and industry-wide compatibility in aluminium applications.
Frequently Asked Questions
EN 12482-2:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock". This standard covers: This part of prEN 12482 specifies the particular requirements for wrought aluminium and aluminium alloys in the form of hot rolled strip. The thickness range covered is over 0,20 mm to 4 mm. It does not apply to cold rolled strip which are not rerolled such as strip for general engineering or special applications.
This part of prEN 12482 specifies the particular requirements for wrought aluminium and aluminium alloys in the form of hot rolled strip. The thickness range covered is over 0,20 mm to 4 mm. It does not apply to cold rolled strip which are not rerolled such as strip for general engineering or special applications.
EN 12482-2:1998 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12482-2:1998 has the following relationships with other standards: It is excused to EN 12482-1:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12482-2:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine - Predvaljani trakovi za splošno uporabo - 2. del: Specifikacije za hladno valjane trakove, ki so bili predvaljaniAluminium und Aluminiumlegierungen - Vorwalzband für allgemeine Anwendungen - Teil 2: Spezifikationen für kaltegewalztes VorwalzbandAluminium et alliages d'aluminium - Ebauches de relaminage pour applications générales - Partie 2: Spécifications pour ébauches obtenues par laminage a froidAluminium a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...