EN ISO 11591:2020/A1:2023

SLOVENSKI STANDARD
01-maj-2023
Mala plovila - Vidno polje izza krmila - Dopolnilo A1 (ISO 11591:2020/Amd 1:2022)
Small craft - Field of vision from the steering position - Amendment 1 (ISO
11591:2020/Amd 1:2022)
Kleine Wasserfahrzeuge - Sichtfeld vom Steuerstand - Änderung 1 (ISO
11591:2020/Amd 1:2022)
Petits navires - Champ de vision depuis le poste de pilotage - Amendement 1 (ISO
11591:2020/Amd 1:2022)
Ta slovenski standard je istoveten z: EN ISO 11591:2020/A1:2023
ICS:
47.080 Čolni Small craft
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 11591:2020/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2023
EUROPÄISCHE NORM
ICS 47.080
English Version
Small craft - Field of vision from the steering position -
Amendment 1 (ISO 11591:2020/Amd 1:2022)
Petits navires - Champ de vision depuis le poste de Kleine Wasserfahrzeuge - Sichtfeld vom Steuerstand -
pilotage - Amendement 1 (ISO 11591:2020/Amd Änderung 1 (ISO 11591:2020/Amd 1:2022)
1:2022)
This amendment A1 modifies the European Standard EN ISO 11591:2020; it was approved by CEN on 29 October 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11591:2020/A1:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4
European foreword
This document (EN ISO 11591:2020/A1:2023) has been prepared by Technical Committee ISO/TC
188 "Small craft" in collaboration with Technical Committee CEN/TC 464 “Small Craft” the
secretariat of which is held by SIS.
This Amendment to the European Standard EN ISO 11591:2020 shall be given the status of a
national standard, either by publication of an identical text or by endorsement, at the latest by
September 2023, and conflicting national standards shall be withdrawn at the latest by September
2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an
integral part of this document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Endorsement notice
The text of ISO 11591:2020/Amd 1:2022 has been approved by CEN as
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered
This European Standard has been prepared under a Commission’s standardization request
M/542/C(2015) 8736 final to provide one voluntary means of conforming to essential
requirements of Directive 2013/53/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the
limits of the scope of this standard, a presumption of conformity with the corresponding essential
requirements of that Directive, and associated EFTA regulations.
Table ZA.1— Correspondence between this European Standard and Annex I and Annex II of
Directive 2013/53/EU
Essential Requirements of Clause(s)/sub-clause(s) of Remarks/Notes
Directive 2013/53/EU this EN
I.A.2.4 — Visibility from the 4, 5, 6, 7, Annex A This Standard specifies the field
main steering position of vision requirements from the
main steering position, both
forward and astern, in the
horizontal and vertical planes
for recreational craft as
specified in Article 3(2) of
Directive 2013/53/EU that fall
within its scope.
I.A.2.5 - Owner’s manual 8
Table ZA.2 — Applicable Standards to confer presumption of conformity as described in this
Annex ZA
Column 4
Column 1 Column 2
Column 3
Reference in International
Corresponding European
Title
Clause 2 Standard Edition
Standard Edition
Graphical symbols —
Safety colours and safety
ISO 7010:2019 ISO 7010:2019 EN ISO 7010:2020
signs — Registered safety
signs
Small craft — Graphical
ISO 11192:2005 ISO 11192:2005 EN ISO 11192:2018
symbols
The documents listed in the Column 1 of Table ZA.2, in whole or in part, are normatively referenced
in this document, i.e. are indispensable for its application. The achievement of the presumption of
conformity is subject to the application of the edition of Standards as listed in Column 4 or, if no
European Standard Edition exists, the International Standard Edition given in Column 2 of Table
ZA.2.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of
this standard should consult frequently the latest list published in the Official Journal of the
European Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope
of this standard.
INTERNATIONAL ISO
STANDARD 11591
Fourth edition
2020-10
AMENDMENT 1
2022-10
Small craft — Field of vision from the
steering position
AMENDMENT 1
Petits navires — Champ de vision depuis le poste de pilotage
AMENDEMENT 1
Reference number
ISO 11591:2020/Amd.1:2022(E)
ISO 11591:2020/Amd.1:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
...