EN 14187-8:2003
(Main)Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
This European Standard describes a test method for evaluating the resistance of cold applied joint sealants to the action of UV-light by determination of the change of physical properties after irradiation by artificial UV-light.
Kalt verarbeitbare Fugenmassen - Teil 8: Prüfverfahren zur Bestimmung der künstlichen Bewitterung durch UV-Bestrahlung
Diese Europäische Norm beschreibt ein Prüfverfahren zur Bewertung der Beständigkeit von kalt verarbeitbaren Fugenmassen bei Einwirkung von UV Licht, wobei die Änderung physikalischer Eigenschaften nach Bestrahlung mit künstlichem UV Licht bestimmt wird.
Mastics pour joints appliqués à froid - Partie 8: Méthodes d'essai pour la détermination du vieillissement artificiel par rayonnement UV
La présente Norme européenne décrit une méthode d'évaluation de la résistance des mastics pour joints appliqués à froid à l'action des UV en déterminant les modifications subies par leurs propriétés physiques après exposition à une source artificielle de lumière UV.
Hladno nanosljive tesnilne mase za stike – 8. del: Preskusna metoda za ugotavljanje umetnega staranja z ultravijoličnim sevanjem
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kalt verarbeitbare Fugenmassen - Teil 8: Prüfverfahren zur Bestimmung der künstlichen Bewitterung durch UV-BestrahlungMastics pour joints appliqués a froid - Partie 8: Méthodes d'essai pour la détermination du vieillissement artificiel par rayonnement UVCold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 14187-8:2003SIST EN 14187-8:2004en01-junij-2004SIST EN 14187-8:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14187-8June 2003ICS 93.080.20English versionCold applied joint sealants - Part 8: Test method for thedetermination of the artificial weathering by UV-irradiationMastics pour joints appliqués à froid - Partie 8: Méthodesd'essai pour la détermination du vieillissement artificiel parrayonnement UVKalt verarbeitbare Fugenmassen - Teil 8: Prüfverfahren zurBestimmung der künstlichen Bewitterung durch UV-BestrahlungThis European Standard was approved by CEN on 25 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14187-8:2003 ESIST EN 14187-8:2004
1)In preparation.SIST EN 14187-8:2004
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.