EN 1123-2:1999
(Main)Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions
This standard applies to pipes and fittings of longitudinally welded, hot-dip galvanized steel pipes with spigot and socket for waste water systems. It specifies dimensions and tolerances for pipes, fittings, pipe connectors and seals and establishes a system of designations for the different pipe and fitting types that conform to the stated requirements. This standard is only valid in connection with prEN 1123-1.
Rohre und Formstücke aus längsnahtgeschweißtem, feuerverzinktem Stahlrohr mit Steckmuffe für Abwasserleitungen - Teil 2: Maße
Diese Norm gilt für Rohre und Formstücke aus längsnahtgeschweißtem, feuerverzinktem Stahlrohr mit Steckmuffe für Abwasserleitungen. Sie legt Maße und Grenzabmaße für Rohre, Formstücke, Rohrverbindungen und Dichtmittel fest und enthält zur einfachen Identifizierung jedes Bauteils ein System für die Bezeichnung der verschiedenen Arten von Rohren und Formstücken, die mit den getroffenen Anforderungen übereinstimmen. Diese Norm gilt nur in Verbindung mit prEN 1123-1.
Tubes et raccords de tube soudés longitudinalement en acier galvanisé à chaud, à manchon enfichable pour réseaux d'assainissement - Partie 2: Dimensions
La présente norme s'applique aux tubes et raccords à manchon enfichable en acier galvanisé à chaud, soudé longitudinalement pour réseaux d'assainissement. Cette norme indique les dimensions et les tolérances pour tubes, raccords, jonctions de tubes et leurs joints et contient, pour l'identification simple de chaque élément de construction, un système pour la désignation des types différents de tubes et raccords qui correspondent aux exigences déterminées. La présente norme n'est valable qu'en rapport avec le prEN 1123-1.
Vzdolžno varjene jeklene cevi in spojniki, vroče galvanizirani, z obojko, za sisteme za odpadno vodo - 2. del: Mere
General Information
- Status
- Withdrawn
- Publication Date
- 19-Jan-1999
- Withdrawal Date
- 21-Nov-2006
- Technical Committee
- CEN/TC 165 - Waste water engineering
- Drafting Committee
- CEN/TC 165/WG 7 - Steel pipes
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 22-Nov-2006
- Completion Date
- 22-Nov-2006
Not Harmonized89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 1123-2:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions". This standard covers: This standard applies to pipes and fittings of longitudinally welded, hot-dip galvanized steel pipes with spigot and socket for waste water systems. It specifies dimensions and tolerances for pipes, fittings, pipe connectors and seals and establishes a system of designations for the different pipe and fitting types that conform to the stated requirements. This standard is only valid in connection with prEN 1123-1.
This standard applies to pipes and fittings of longitudinally welded, hot-dip galvanized steel pipes with spigot and socket for waste water systems. It specifies dimensions and tolerances for pipes, fittings, pipe connectors and seals and establishes a system of designations for the different pipe and fitting types that conform to the stated requirements. This standard is only valid in connection with prEN 1123-1.
EN 1123-2:1999 is classified under the following ICS (International Classification for Standards) categories: 23.040.05 - Pipeline and its parts for external sewage systems; 23.040.10 - Iron and steel pipes; 23.040.40 - Metal fittings; 23.040.60 - Flanges, couplings and joints. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1123-2:1999 has the following relationships with other standards: It is inter standard links to EN 1123-2:2006, EN 1123-3:2004; is excused to EN 1123-1:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1123-2:1999 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1123-2:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rohre und Formstücke aus längsnahtgeschweißtem, feuerverzinktem Stahlrohr mit Steckmuffe für Abwasserleitungen - Teil 2: MaßeTubes et raccords de tube soudés longitudinalement en acier galvanisé a chaud, a manchon enfichable pour réseaux d'assainissement - Partie 2: DimensionsPipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 2: Dimensions93.030Zunanji sistemi za odpadno vodoExternal sewage systems77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 1123-2:1999SIST EN 1123-2:2000en01-november-2000SIST EN 1123-2:2000SLOVENSKI
STANDARD
SIST
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...