EN 10305-1:2016
(Main)Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
This European Standard specifies the technical delivery conditions for seamless cold drawn steel tubes of circular cross section for precision applications with specified outside diameter D ≤ 380 mm.
This document may also be applied to other types of cross sections.
Tubes according to this document are characterized by having precisely defined tolerances on dimensions and a specified maximum surface roughness. Typical fields of application are in the automotive, furniture and general engineering industries.
Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 1: Nahtlose kaltgezogene Rohre
Diese Europäische Norm legt die technischen Lieferbedingungen für nahtlose kaltgezogene Präzisionsrohre aus Stahl mit kreisförmigem Querschnitt und einem Nennaußendurchmesser D 380 mm fest.
ANMERKUNG Dieses Dokument darf auch für andere Querschnitte angewendet werden.
Rohre nach diesem Dokument sind durch genau definierte Grenzabmaße und eine festgelegte maximale Oberflächenrauheit charakterisiert. Typische Anwendungsgebiete sind der Fahrzeugbau, die Möbelindustrie und der Allgemeine Maschinenbau.
Tubes de précision en acier - Conditions techniques de livraison - Partie 1: Tubes sans soudure étirés à froid
La présente Norme européenne spécifie les conditions techniques de livraison pour les tubes en acier sans soudure étirés à froid, de section circulaire, destinés aux applications de précision avec un diamètre extérieur spécifié D ≤ 380 mm.
Le présent document peut aussi s'appliquer à d'autres types de sections.
Les tubes conformes au présent document se caractérisent par des tolérances dimensionnelles précises et par une rugosité maximale spécifiée. Les domaines typiques d'application se situent dans le secteur automobile, l'ameublement et l'ingénierie générale.
Jeklene cevi za precizno uporabo - Tehnični dobavni pogoji - 1. del: Nevarjene hladno vlečene cevi
Ta evropski standard določa tehnične dobavne pogoje za nevarjene hladno vlečene cevi s krožnim prečnim prerezom za precizno uporabo z določenim zunanjim premerom D ≤ 380 mm.
OPOMBA: Ta dokument se lahko uporablja tudi za druge vrste prečnih prerezov.
Cevi v skladu s tem dokumentom imajo natančno opredeljene tolerance za mere in določeno največjo površinsko hrapavost. Tipična področja uporabe so v avtomobilski in pohištveni industriji ter v splošnem inženirstvu.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 1: Nahtlose kaltgezogene RohreTubes de précision en acier - Conditions techniques de livraison - Partie 1: Tubes sans soudure étirés à froidSteel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 10305-1:2016SIST EN 10305-1:2016en,fr,de01-oktober-2016SIST EN 10305-1:2016SLOVENSKI
STANDARDSIST EN 10305-1:20101DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10305-1
March
t r s x ICS
y yä s v rä y w Supersedes EN
s r u r wæ sã t r s rEnglish Version
Steel tubes for precision applications æ Technical delivery conditions æ Part
sã Seamless cold drawn tubes Tubes de précision en acier æ Conditions techniques de livraison æ Partie
sã Tubes sans soudure étirés à froid
Präzisionsstahlrohre æ Technische Lieferbedingungen æTeil
sã Nahtlose kaltgezogene Rohre This European Standard was approved by CEN on
s z January
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s r u r wæ sã t r s x ESIST EN 10305-1:2016
Requirement for additional steel grades . 25 Bibliography . 28
¶ 380 mm. This document may also be applied to other types of cross sections. Tubes according to this document are characterized by having precisely defined tolerances on dimensions and a specified maximum surface roughness. Typical fields of application are in the automotive, furniture and general engineering industries. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10020:2000, Definition and classification of grades of steel EN 10021:2006, General technical delivery conditions for steel products EN 10027-1, Designation systems for steels - Part 1: Steel names EN 10027-2, Designation systems for steels - Part 2: Numerical system EN 10052:1993, Vocabulary of heat treatment terms for ferrous products EN 10168, Steel products - Inspection documents - List of information and description EN 10204, Metallic products - Types of inspection documents EN 10266:2003, Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards EN ISO 377, Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377) EN ISO 2566-1, Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1) EN ISO 4287, Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287) EN ISO 6892-1, Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1) EN ISO 8492, Metallic materials - Tube - Flattening test (ISO 8492) EN ISO 8493, Metallic materials - Tube - Drift-expanding test (ISO 8493) EN ISO 10893-1, Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.