EN 1096-4:2018
(Main)Glass in building - Coated glass - Part 4: Product standard
Glass in building - Coated glass - Part 4: Product standard
This European Standard covers the evaluation of conformity and the factory production control of coated glass for use in buildings.
NOTE For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.
Glas im Bauwesen - Beschichtetes Glas - Teil 4: Produktnorm
Diese Europäische Norm umfasst die Konformitätsbewertung und die werkseigene Produktionskontrolle von beschichtetem Glas zur Anwendung im Bauwesen.
ANMERKUNG Für Glaserzeugnisse mit elektrischer Verkabelung oder Anschlüssen, wie z. B. Alarm- oder Heizungsanwendungen, können andere Richtlinien, z. B. die Niedrigspannungsrichtlinie, gelten.
Verre dans la construction - Verre à couche - Partie 4: Norme de produit
La présente Norme européenne traite de l’évaluation de la conformité et du contrôle de la production en usine du verre à couche utilisé dans la construction.
NOTE Pour les produits verriers équipés d’un câblage ou de branchements électriques, pour les besoins d’alarme ou de chauffage par exemple, d’autres directives comme la Directive Basse tension peuvent s’appliquer.
Steklo v gradbeništvu - Steklo z nanosi - 4. del: Standard za proizvod
Ta evropski standard zajema vrednotenje skladnosti in kontrolo tovarniške proizvodnje stekla z nanosi, ki se uporablja v stavbah.
OPOMBA: Za steklene izdelke z električno napeljavo ali priključki za npr. alarmne ali grelne namene se lahko uporabljajo druge direktive, npr. direktiva o nizki napetosti.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steklo v gradbeništvu - Steklo z nanosi - 4. del: Standard za proizvodGlas im Bauwesen - Beschichtetes Glas - Teil 4: ProduktnormVerre dans la construction - Verre à couche - Partie 4: Norme de produitGlass in building - Coated glass - Part 4: Product standard81.040.20Steklo v gradbeništvuGlass in buildingICS:Ta slovenski standard je istoveten z:EN 1096-4:2018SIST EN 1096-4:2018en,fr,de01-december-2018SIST EN 1096-4:2018SLOVENSKI
STANDARDSIST EN 1096-4:20051DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1096-4
August
t r s z ICS
z sä r v rä t r Supersedes EN
s r { xæ vã t r r vEnglish Version
Glass in building æ Coated glass æ Part
vã Product standardVerre dans la construction æ Verre à couche æ Partie
vã Norme de produit
Glas im Bauwesen æ Beschichtetes Glas æ Teil
vã Produktnorm This European Standard was approved by CEN on
x May
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s r { xæ vã t r s z ESIST EN 1096-4:2018
Factory production control . 17 Annex B (informative)
Tests for factory production control . 25 Annex C (normative)
Type testing, sampling and measurement of spectrophotometric and energy characteristics . 27 Annex D (informative)
Provisions for voluntary involvement of third party(ies) . 29 Annex ZA (informative)
Relationship of this European Standard with Regulation (EU) No.305/2011 . 30 Bibliography . 35
IEC Electropedia: available at http://www.electropedia.org/
ISO Online browsing platform: available at http://www.iso.org/obp 3.1.1 factory production control FPC documented, permanent and internal control of production in a factory, in accordance with this standard Note 1 to entry: See also Annexes A and B. [SOURCE: Regulation (EU) No 305/2011] 3.1.2 product-type set of representative performance levels or classes of a construction product, in relation to its essential characteristics, produced using a given combination of raw materials or other elements in a specific production process [SOURCE: Regulation (EU) No 305/2011] 3.1.3 essential characteristic characteristic of the construction product which relate to the basic requirements for construction works Note 1 to entry: Basic requirements for construction work are given in the regulation (EU) No 305/2011, Annex I. [SOURCE: Regulation (EU) No 305/2011] 3.1.4 performance of a construction product performance related to the relevant essential characteristics, expressed by level or class, or in a description [SOURCE: Regulation (EU) No 305/2011] 3.1.5 level result of the assessment of the performance of a construction product in relation to its essential characteristics, expressed as a numerical value [SOURCE: Regulation (EU) No 305/2011] SIST EN 1096-4:2018
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.