Petroleum and related products from natural or synthetic sources - Determination of cloud point (ISO 3015:2019)

This document specifies a method for the determination of the cloud point of petroleum products which are transparent in layers 40 mm in thickness and have a cloud point below 49 °C, amongst which are diesel fuels with up to 30 % (V/V) of fatty acid methyl ester (FAME)[2], paraffinic diesel fuels with up to 7 % (V/V) FAME[3], 100 % FAME[5] and lubricants.
NOTE       For the purposes of this document, the term "% (V/V)" is used to represent the volume fraction (φ) of a material.

Mineralölerzeugnisse und verwandte Produkte mit natürlichem oder synthetischem Ursprung - Bestimmung des Cloudpoints (ISO 3015:2019)

Dieses Dokument legt ein Verfahren zur Bestimmung des Cloudpoints von Mineralölerzeugnissen fest, die bei einer Schichtdicke von 40 mm durchsichtig sind und einen Cloudpoint unterhalb 49 °C haben; dazu gehören Dieselkraftstoffe, die bis zu 30 % (V/V) Fettsäure-Methylester (FAME) [2] enthalten, paraffinische Dieselkraftstoffe, die bis zu 7 % (V/V) FAME [3] enthalten, 100 % FAME [5] und Schmierstoffe.
ANMERKUNG   Für die Zwecke dieses Dokuments wird zur Angabe des Volumenanteils (φ) einer Substanz der Ausdruck „% (V/V)“ verwendet.

Produits pétroliers et connexes d'origine naturelle ou synthétique - Détermination du point de trouble (ISO 3015:2019)

Le présent document spécifie une méthode d'essai qui permet de déterminer le point de trouble de produits pétroliers qui sont limpides sous une épaisseur de 40 mm et dont le point de trouble est inférieur à 49 °C, parmi lesquels des carburants diesel dont la teneur en esters méthyliques d'acides gras (EMAG)[2] peut s'élever jusqu'à 30 % (V/V), des carburants diesel paraffiniques dont la teneur en EMAG peut s'élever jusqu'à 7 % (V/V),[3] des EMAG purs[5] ainsi que des lubrifiants.
NOTE       Pour les besoins du présent document, l'expression "% (V/V)" est utilisée pour désigner les fractions volumiques, φ.

Naftni in sorodni proizvodi iz naravnih ali sintetičnih virov - Določevanje motnišča (ISO 3015:2019)

Ta dokument določa metodo za ugotavljanje motnišča naftnih proizvodov, ki so transparentni v 40 mm plasteh in imajo motnišče pri temperaturi pod 49 °C, med katerimi so dizelska goriva, ki vsebujejo do 30 odstotkov (V/V) metilnih estrov maščobnih kislin [2], parafinska dizelska goriva, ki imajo do sedem odstotkov (V/V) metilnih estrov maščobnih kislin [3], 100-odstotni metilni estri maščobnih kislin [5] in maziva.
OPOMBA: Za namene tega dokumenta se termin »% (V/V)« uporablja za prostorninski delež snovi (φ).

General Information

Status
Published
Publication Date
28-May-2019
Withdrawal Date
29-Nov-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
29-May-2019
Completion Date
29-May-2019

Relations

Buy Standard

Standard
EN ISO 3015:2019
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2019
Nadomešča:
SIST EN 23015:1998
Naftni in sorodni proizvodi iz naravnih ali sintetičnih virov - Določevanje motnišča
(ISO 3015:2019)
Petroleum and related products from natural or synthetic sources - Determination of
cloud point (ISO 3015:2019)
Mineralölerzeugnisse und verwandte Produkte mit natürlichem oder synthetischem
Ursprung - Bestimmung des Cloudpoints (ISO 3015:2019)
Produits pétroliers - Détermination du point de trouble (ISO 3015:2019)
Ta slovenski standard je istoveten z: EN ISO 3015:2019
ICS:
75.080 Naftni proizvodi na splošno Petroleum products in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 3015
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 75.080 Supersedes EN 23015:1994
English Version
Petroleum and related products from natural or synthetic
sources - Determination of cloud point (ISO 3015:2019)
Produits pétroliers et connexes d'origine naturelle ou Mineralölerzeugnisse und verwandte Produkte mit
synthétique - Détermination du point de trouble (ISO natürlichem oder synthetischem Ursprung -
3015:2019) Bestimmung des Cloudpoints (ISO 3015:2019)
This European Standard was approved by CEN on 23 March 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3015:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 3015:2019) has been prepared by Technical Committee ISO/TC 28 "Petroleum
and related products, fuels and lubricants from natural or synthetic sources" in collaboration with
Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants and related products of
petroleum, synthetic and biological origin.” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2019, and conflicting national standards
shall be withdrawn at the latest by November 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 23015:1994.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3015:2019 has been approved by CEN as EN ISO 3015:2019 without any modification.

INTERNATIONAL ISO
STANDARD 3015
Third edition
2019-04
Petroleum and related products
from natural or synthetic sources —
Determination of cloud point
Produits pétroliers et connexes d'origine naturelle ou synthétique —
Détermination du point de trouble
Reference number
ISO 3015:2019(E)
©
ISO 2019
ISO 3015:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 3015:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Sampling . 2
7 Procedure. 3
8 Expression of results . 5
9 Precision . 5
9.1 General . 5
9.2 Repeatability . 5
9.3 Reproducibility . 5
10 Test report . 5
Annex A (normative) Specifications of temperature measuring devices . 6
Annex B (informative) Commonly used chemicals and freezing mixtures .8
Bibliography . 9
ISO 3015:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 28, Petroleum and related products, fuels
and lubricants from natural or synthetic sources.
This third edition cancels and replaces the second edition (ISO 3015:1992), which has been technically
revised. The main changes compared to the previous edition are as follows:
— extension of the scope to diesel fuels with up to 30 % (V/V) FAME and inclusion of paraffinic
diesel fuels;
— inclusion of digital contact thermometer;
— normative references in Clause 2 have been updated;
[1]
— bath and sample temperature ranges have been aligned with ASTM D2500 , changes in bath
temperature and the temperatures at which the test jars are moved to the batch with the next lower
temperature have over the years (1992 up to the time of publication of this document) not led to
observation of a bias versus test results obtained with the former edition;
— the precision for 'other products' has been removed as data to support it could not be obtained for
comparison;
— a bibliography has been added.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved

INTERNATIONAL STANDARD ISO 3015:2019(E)
Petroleum and related products from natural or synthetic
sources — Determination of cloud point
WARNING — The use of this document can involve hazardous materials, operations and
equipment. This document does not purport to address all of the safety problems associated with
its use. It is the responsibility of users of this document to take appropriate measures to ensure
the safety and health of personnel prior to application of this document, and to determine the
applicability of any other restrictions.
1 Scope
This document specifies a method for the determination of the cloud point of petroleum products which
are transparent in layers 40 mm in thickness and have a cloud point below 49 °C, amongst which are
[2]
diesel fuels with up to 30 % (V/V) of fatty acid methyl ester (FAME) , paraffinic diesel fuels with up to
[3] [5]
7 % (V/V) FAME , 100 % FAME and lubricants.
NOTE For the purposes of this document, the term “% (V/V)” is used to represent the volume fraction (φ) of
a material.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 3170, Petroleum liquids — Manual sampling
ISO 3171, Petroleum liquids — Automatic pipeline sampling
ASTM D7962, Standard Practice for Determination of minimum Immersion Depth and Assessment of
Temperature Sensor Measurement Drift
ASTM E644-11, Standard Test Methods for Testing Industrial Resistance Thermometers
ASTM E2877, Standard Guide
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.