EN 1436:2007+A1:2008

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Straßenmarkierungsmaterialien - Anforderungen an Markierungen auf StraßenProduits de marquage routier - Performances des marquages routiers pour les usagers de la routeRoad marking materials - Road marking performance for road users93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 1436:2007+A1:2008SIST EN 1436:2007+A1:2009en,de01-januar-2009SIST EN 1436:2007+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1436:2007+A1
October 2008 ICS 93.080.30 Supersedes EN 1436:2007 English Version
Road marking materials - Road marking performance for road users
Produits de marquage routier - Performances des marquages routiers pour les usagers de la route
Straßenmarkierungsmaterialien - Anforderungen an Markierungen auf Straßen This European Standard was approved by CEN on 21 June 2007 and includes Amendment 1 approved by CEN on 14 August 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1436:2007+A1:2008: ESIST EN 1436:2007+A1:2009

Measurement method for the luminance coefficient under diffuse illumination Qd.12 A.1 Introduction.12 A.2 Spectral match.13 A.3 Standard measuring condition of measuring equipment.13 A.4 Practical applications of measuring equipment.14 A.5 Calibration of measuring equipment.14 A.6 Uncertainty of measurement.15 Annex B (normative)
Measurement method for the coefficient of retroreflected luminance RL.16 B.1 Introduction.16 B.2 Spectral match of measuring equipment.16 B.3 Standard measuring condition of measuring equipment.17 B.4 Practical applications of measuring equipment.18 B.5 Calibration of measuring equipment.18 B.6 Condition of wetness.19 B.7 Condition of rain.19 B.8 Uncertainty of measurement.19 Annex C (normative)
Measuring method for the luminance factor ββββ and chromaticity co-ordinates x and y.21 C.1 Standard measuring condition.21 C.2 Measuring equipment.21 C.3 Uncertainty of measurement.21 Annex D (normative)
Measuring method for skid resistance.22 D.1
Principle of the test.22 D.2
Description of the skid resistance tester.22 D.3
Maintenance of the rubber slider.22 D.4
Adjustment of the sliding length.23 D.5
Measuring the SRT value.23 D.6
Correction for the temperature.23 D.7
Uncertainty of measurement.24 Bibliography.25 SIST EN 1436:2007+A1:2009

100 IRHD) ISO 4662, Rubber — Determination of rebound resilience of vulcanizates !ISO 10526", CIE standard illuminants for colorimetry 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in IEC 60050-845:1987 and the following apply. 3.1 luminance coefficient under diffuse illumination (of a field of a road marking) Qd (mcd⋅m-2⋅lx-1) quotient of the luminance of the field of the road marking in the given direction by the illuminance on the field 3.2 luminance factor (of a field of a road marking, in a given direction, under specified conditions of illumination) β (unit: 1) ratio of the luminance of the field of the road marking in the given direction to that of a perfect reflecting diffuser identically illuminated NOTE This definition is slightly adapted as compared to the definition of IEC 60050-845. 3.3 coefficient of retroreflected luminance (of a field of a road marking) RL (mcd⋅m-2⋅lx-1) quotient of the luminance L of the field of the road marking in the direction of observation by the illuminance E⊥ at the field perpendicular to the direction of the incident light 3.4 skid resistance tester value (of a road marking) skid resistance quality of a wet surface measured by the friction at low speed of a rubber slider upon this surface. The abbreviation SRT applies 3.5 functional life (of a road marking) period during which the road marking fulfils all the performance requirements of the classes initially specified by the road authority
1) CIE Publication 17.4 International Electrotechnical Vocabulary is identical to IEC 60050-845. SIST EN 1436:2007+A1:2009
...