EN 2243-3:2005

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb coreSérie aérospatiale - Matériaux non-métalliques - Systeme d'adhésifs structuraux - Méthodes d'essai - Partie 3 : Essai de pelage métal-nid d'abeillesLuft- und Raumfahrt - Nichtmetallische
Werkstoffe - Strukturelle Klebstoffsysteme - Prüfverfahren - Teil 3: Trommelschälversuch für WabenkernverbundeTa slovenski standard je istoveten z:EN 2243-3:2005SIST EN 2243-3:2006en49.025.50ICS:SLOVENSKI
STANDARDSIST EN 2243-3:200601-julij-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2243-3October 2005ICS 49.025.50Supersedes EN 2243-3:1991
English VersionAerospace series - Non-metallic materials - Structural adhesives- Test method - Part 3: Peeling test metal-honeycomb coreSérie aérospatiale - Matériaux non-métalliques - Systèmed'adhésifs structuraux - Méthodes d'essai - Partie 3 : Essaide pelage métal-nid d'abeillesLuft- und Raumfahrt - Nichtmetallische
Werkstoffe -Strukturelle Klebstoffsysteme - Prüfverfahren - Teil 3:Trommelschälversuch für WabenkernverbundeThis European Standard was approved by CEN on 26 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2243-3:2005: E

3 Definitions, symbols and abbreviations 3.1 Definitions Not applicable 3.2 Symbols and abbreviations For the purposes of this document, the following symbols and abbreviations apply. F peeling load (in newtons); F0 rolling load (in newtons) = Load necessary to roll up the skin;
1) Published as AECMA Prestandard at the date of publication of this standard. 2) In preparation at the date of publication of this standard.
...