EN 2667-3:2019

SLOVENSKI STANDARD
01-november-2019
Aeronavtika - Nekovinski materiali - Penaste folije gradbenih lepil - Preskusne
metode - 3. del: Ekspanzijsko razmerje in hlapna vsebina
Aerospace series - Non-metallic materials - Foaming structural adhesive films - Test
methods - Part 3 : Expansion ratio and volatile content
Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Schäumende Strukturklebefolien -
Prüfverfahren - Teil 3: Ausdehnungsverhältnis und flüchtige Anteile
Série aérospatiale - Matériaux non-métalliques - Adhésifs structuraux expansibles en film
- Méthodes d’essai - Partie 3 : Taux d'expansion et taux de matières volatiles
Ta slovenski standard je istoveten z: EN 2667-3:2019
ICS:
49.025.50 Lepila Adhesives
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 2667-3
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2019
EUROPÄISCHE NORM
ICS 49.025.50
English Version
Aerospace series - Non-metallic materials - Foaming
structural adhesive films - Test methods - Part 3:
Expansion ratio and volatile content
Série aérospatiale - Matériaux non-métalliques - Luft- und Raumfahrt - Nichtmetallische Werkstoffe -
Adhésifs structuraux expansibles en film - Méthodes Strukturelle Expansionsklebstoffe in Filmform -
d'essai - Partie 3 : Taux d'expansion et taux de matières Prüfverfahren - Teil 3: Expansionsgrade und Anteil an
volatiles flüchtigen Bestandteilen
This European Standard was approved by CEN on 17 September 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2667-3:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus and auxiliary equipment . 4
6 Test specimens . 5
7 Expression of results. 6
8 Designation . 6
9 Test report . 6

European foreword
This document (EN 2667-3:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall
be withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
Uni
...