EN 4106:2013
(Main)Aerospace series - Non-metallic materials - Structural adhesive systems - Paste adhesive - Technical specification
Aerospace series - Non-metallic materials - Structural adhesive systems - Paste adhesive - Technical specification
This European Standard defines the requirements for manufacture, qualification, inspection and testing of products in structural adhesive systems where the adhesive is supplied in the form of a paste, either a one part or two part system, for aerospace applications. The adhesive may be used in conjunction with a primer whose requirements are also included in this European Standard. It is applicable whenever referenced on a material standard.
Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Strukturelle Klebstoffsysteme - Klebstoffpaste - Technische Lieferbedingungen
Diese Europäische Norm legt die Anforderungen für die Herstellung, Qualifikation und Prüfung von Produkten in strukturellen Klebstoffsystemen fest, bei denen der Klebstoff in Form einer Paste vorliegt, entweder als Ein- oder Zweikomponentensystem, zur Anwendung in der Luft- und Raumfahrt. Der Klebstoff kann in Verbindung mit einem Haftgrundmittel verwendet werden, für den die Anforderungen ebenfalls in dieser Norm enthalten sind. Sie ist immer dann anzuwenden, wenn in einer Werkstoffnorm auf sie verwiesen wird.
Série aérospatiale - Matériaux non-métalliques - Systèmes d’adhésifs structuraux - Adhésif en pâte - Spécification technique
La présente Norme européenne définit les exigences relatives à la fabrication, la qualification, le contrôle et les essais de produits dans les systèmes d’adhésifs structuraux, systèmes en une seule ou en deux parties, lorsque l’adhésif est fourni sous forme de pâte, pour les applications aérospatiales. L’adhésif peut être utilisé conjointement avec le primaire dont les exigences sont aussi incluses dans la présente Norme européenne. Elle s’applique chaque fois qu’elle est citée en référence dans une norme de matériau.
Aeronavtika - Nekovinski materiali - Strukturni adhezivni sistemi - Sistemi za lepljenje struktur - Tehnična specifikacija
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Strukturelle Klebstoffsysteme - Klebstoffpasten - Technische LieferbedingungenSérie aérospatiale - Matériaux non-métalliques - Systèmes d’adhésifs structuraux - Adhésif en pâte - Spécification techniqueAerospace series - Non-metallic materials - Structural adhesive systems - Paste adhesive - Technical specification49.025.50LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 4106:2013SIST EN 4106:2014en01-februar-2014SIST EN 4106:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4106
January 2013 ICS 49.025.50 English Version
Aerospace series - Non-metallic materials - Structural adhesive systems - Paste adhesive - Technical specification
Série aérospatiale - Matériaux non-métalliques - Systèmes d'adhésifs structuraux - Adhésif en pâte - Spécification technique
Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Strukturelle Klebstoffsysteme - Klebstoffpasten - Technische Lieferbedingungen This European Standard was approved by CEN on 10 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4106:2013: ESIST EN 4106:2014
EN 2379, Aerospace series — Fluids for assessment of non-metallic materials 1) EN 2757, Aerospace series — Structural adhesives system — Test method — Determination of the drying and ignition residues of primers EN 2781, Aerospace series — Non-metallic materials — Structural adhesives — Test methods — Determination of the primer thickness EN 4385, Aerospace series — Non-metallic materials — General organisation of standardisation — Links between types of standards 1) EN 4387, Aerospace series — Non-metallic materials — Rules for drafting and presentation of technical specifications 1) EN 6040, Aerospace series — Non-metallic materials — Test method — Analysis of thermoset systems by High Performance Liquid Chromatography (HPLC) 1) EN 6041, Aerospace series — Non-metallic materials — Test method — Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC) 1) EN 6042, Aerospace series — Organic compounds — Test method — Analysis by infrared spectroscopy 1) EN 6064, Aerospace series — Non-metallic materials — Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC) 1)
1) Published as ASD-STAN Prestandard at the date of publication of this standard (www.asd-stan.org). SIST EN 4106:2014
2) Published as ASD-STAN Technical Report at the date of publication of this standard (www.asd-stan.org). SIST EN 4106:2014
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.