EN 1597-1:1997
(Main)Welding consumables - Test methods - Part 1: Test piece for all-weld metal test specimens in steel, nickel and nickel alloys
Welding consumables - Test methods - Part 1: Test piece for all-weld metal test specimens in steel, nickel and nickel alloys
This standard specifies preparation of test assembly and specimens. The purpose is to determine mechanical properties of all-weld metal where required by the consumables classifications standard or for other purposes in arc welding of steel, nickel and nickel alloys. This standard is not applicable to single- or two-pass welding or fillet welding. For these cases, prEN 1597-2 and prEN 1597-3 apply.
Schweißzusätze - Prüfmethoden - Teil 1: Prüfstück zur Entnahme von Proben aus reinem Schweißgut an Stahl, Nickel und Nickellegierungen
Diese Norm legt die Vorbereitung des Prüfstucks und der Proben fest. Der Zweck ist die Bestimmung der mechanischen Eigenschaften des reinen Schweißgutes, wenn dies durch Normen zur Einteilung von Schweißzusätzen oder für andere Zwecke zum Lichtbogenschweißen von Stahl, Nickel und Nickelegierungen gefordet wird. Diese Norm gilt nicht für Ein- oder Mehrlagenschweißung oder Kehlnahtschweißungen. Für diese Fälle gelten prEN 1597-2 und prEN 1597-3.
Produits consommables pour le soudage - Méthodes d'essai - Partie 1: Assemblage d'essai d'éprouvettes prélevées dans le métal fondu hors dilution pour le soudage de l'acier, du nickel et des alliages de nickel
La présente norme spécifie la préparation des assemblages d'essai et des éprouvettes. Elle a pour objet de déterminer les propriétés mécaniques du métal fondu hors dilution lorsque cela est prescrit par la norme de classification du produit consommable ou pour d'autres besoins rencontrés en soudage à l'arc de l'acier, du nickel et des alliages de nickel. La présente norme ne concerne ni le soudage en une ou deux passes, ni l'exécution de soudures d'angle. Pour ces cas, le prEN 1597-2 et le prEN 1597-3 s'appliquent.
Dodajni materiali za varjenje - Preskusi za razvrščanje - 1. del: Izdelava čistega vara na jeklu, niklju in nikljevih zlitinah
General Information
- Status
- Withdrawn
- Publication Date
- 22-Jul-1997
- Withdrawal Date
- 06-May-2008
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/WG 3 - Welding consumables
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 07-May-2008
- Completion Date
- 07-May-2008
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 1597-1:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Welding consumables - Test methods - Part 1: Test piece for all-weld metal test specimens in steel, nickel and nickel alloys". This standard covers: This standard specifies preparation of test assembly and specimens. The purpose is to determine mechanical properties of all-weld metal where required by the consumables classifications standard or for other purposes in arc welding of steel, nickel and nickel alloys. This standard is not applicable to single- or two-pass welding or fillet welding. For these cases, prEN 1597-2 and prEN 1597-3 apply.
This standard specifies preparation of test assembly and specimens. The purpose is to determine mechanical properties of all-weld metal where required by the consumables classifications standard or for other purposes in arc welding of steel, nickel and nickel alloys. This standard is not applicable to single- or two-pass welding or fillet welding. For these cases, prEN 1597-2 and prEN 1597-3 apply.
EN 1597-1:1997 is classified under the following ICS (International Classification for Standards) categories: 25.160.20 - Welding consumables. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1597-1:1997 has the following relationships with other standards: It is inter standard links to EN ISO 15792-1:2008, EN 14532-2:2004; is excused to EN 1597-3:1997, EN 1597-2:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1597-1:1997 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1597-1:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...