EN 1597-3:1997
(Main)Welding consumables - Test methods - Part 3: Testing of positional capability of welding consumables in a fillet weld
Welding consumables - Test methods - Part 3: Testing of positional capability of welding consumables in a fillet weld
THis standard specifies the preparation of the test piece and the evaluation of the test results. The purpose of this standard is to test positional capability of covered electrodes and tubular cored electrode. Fillet welds shall be made in horizontal, vertical up, vertical down and overhead position, as applicable.
Schweißzusätze - Prüfmethoden - Teil 3: Prüfung der Eignung für Schweißpositionen an Kehlnahtschweißungen
Diese Norm legt die Vorbereitung des Prüfstücks und die Bewertung der Prüfergebnisse fest. Der Zweck ist, die Eignung von umhüllten Stabelektroden und von Fülldrahtelektroden zum Schweißen in verschiedenen Positionen zu prüfen. Falls anwendbar, können Kehlnahtschweißungen in der Horizontal-, Steig-, Fall- und Überkopfposition ausgeführt werden.
Produits consommables pour le soudage - Méthodes d'essai - Partie 3: Evaluation de l'aptitude des produits consommables à la réalisation de soudures d'angle en position
La présente norme spécifie la préparation de l'assemblage d'essai de soudage et l'évaluation des résultats d'essais. Elle a pour objet de déterminer l'aptitude au soudage en position des électrodes enrobées et des fils fourrés. Les soudures d'angle peuvent être exécutées, selon le cas, en position à plat, verticale montante, verticale descendante et au plafond.
Dodajni materiali za varjenje - Preskusne metode - 3. del: Preskušanje primernosti dodajnega materiala glede na lego pri varjenju kotnega zvara
General Information
- Status
- Withdrawn
- Publication Date
- 22-Jul-1997
- Withdrawal Date
- 06-May-2008
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/WG 3 - Welding consumables
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 07-May-2008
- Completion Date
- 07-May-2008
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 1597-3:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Welding consumables - Test methods - Part 3: Testing of positional capability of welding consumables in a fillet weld". This standard covers: THis standard specifies the preparation of the test piece and the evaluation of the test results. The purpose of this standard is to test positional capability of covered electrodes and tubular cored electrode. Fillet welds shall be made in horizontal, vertical up, vertical down and overhead position, as applicable.
THis standard specifies the preparation of the test piece and the evaluation of the test results. The purpose of this standard is to test positional capability of covered electrodes and tubular cored electrode. Fillet welds shall be made in horizontal, vertical up, vertical down and overhead position, as applicable.
EN 1597-3:1997 is classified under the following ICS (International Classification for Standards) categories: 25.160.20 - Welding consumables. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1597-3:1997 has the following relationships with other standards: It is inter standard links to EN ISO 15792-3:2008; is excused to EN 1597-1:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1597-3:1997 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1597-3:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...