EN 1597-2:1997
(Main)Welding consumables - Test methods - Part 2: Preparation of test piece for single-run and two-run technique test specimens in steel
Welding consumables - Test methods - Part 2: Preparation of test piece for single-run and two-run technique test specimens in steel
This standard specifies preparation of butt weld test assembly and specimens. The purpose is to define the test methods in order to determine strength and impact strength of the welded joint when testing welding consumables used for submerged arc welding and tubular cored arc welding with single-run and two-run technique. This standard is applicable to welding consumables for arc welding of steel.
Schweißzusätze - Prüfmethoden - Teil 2: Vorbereitung eines Prüfstücks für die Prüfung von Einlagen- und Lage/Gegenlage-Proben an Stahl
Diese Norm legt die Vorbereitung des Prüfstücks an Stumpfnaht- Schweißverbindungen und der Proben fest. Der Zweck ist, Prüfmethoden festzulegen zur Bestimmung der Festigkeit und Kerbschlagarbeit einer Schweißverbindung für die Einteilung von Schweißzusätzen, die für das Unterpulverschweißen und das Lichtbogenschweißen mit Fülldrahtelektroden für Einlagen- und Lage/Gegenlage Schweißungen benutzt werden. Die Norm gilt für Schweißzusätze für das Lichtbogenschweißen von Stählen.
Produits consommables pour le soudage - Méthodes d'essai - Partie 2: Préparation de l'assemblage d'essai pour la réalisation d'éprouvettes de soudage en une ou deux passes, en acier
La présente norme spécifie la préparation des assemblages d'essai de soudage bout à bout et des éprouvettes. elle a pour objet de définir les méthodes pour l'essai des produits consommables utilisés en soudage à l'arc sous flux et en soudage avec fil bourré afin de déterminer al résistance mécanique et l'énergie de rupture en flexion par choc du joint soudé en une ou deux passes. La présente norme est applicables aux produits consommables destinés au soudage à l'arc de l'acier.
Dodajni materiali za varjenje Preskusne metode - 2. del: Priprava vzorca za izdelavo preskušancev za enovarkovno in dvovarkovno varjenje jekel
General Information
- Status
- Withdrawn
- Publication Date
- 22-Jul-1997
- Withdrawal Date
- 06-May-2008
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/WG 3 - Welding consumables
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 07-May-2008
- Completion Date
- 07-May-2008
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 1597-2:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Welding consumables - Test methods - Part 2: Preparation of test piece for single-run and two-run technique test specimens in steel". This standard covers: This standard specifies preparation of butt weld test assembly and specimens. The purpose is to define the test methods in order to determine strength and impact strength of the welded joint when testing welding consumables used for submerged arc welding and tubular cored arc welding with single-run and two-run technique. This standard is applicable to welding consumables for arc welding of steel.
This standard specifies preparation of butt weld test assembly and specimens. The purpose is to define the test methods in order to determine strength and impact strength of the welded joint when testing welding consumables used for submerged arc welding and tubular cored arc welding with single-run and two-run technique. This standard is applicable to welding consumables for arc welding of steel.
EN 1597-2:1997 is classified under the following ICS (International Classification for Standards) categories: 25.160.20 - Welding consumables. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1597-2:1997 has the following relationships with other standards: It is inter standard links to EN ISO 15792-2:2008; is excused to EN 1597-1:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1597-2:1997 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1597-2:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...