EN 15329:2015
(Main)Railway applications - Braking - Brake block holder and brake shoe key for railway vehicles
Railway applications - Braking - Brake block holder and brake shoe key for railway vehicles
This European Standard applies to brake block holders and brake shoe keys installed on railway vehicles.
Brake block holders and brake shoe keys made of non-ferrous materials are not subject to this European Standard.
This European Standard contains requirements for design, evaluation testing of conformity and serial production monitoring.
The requirements contained in this European Standard apply to the brake block holders and brake shoe keys with which the railway vehicles of main-line railways, private railways (regional railways, company railways) are fitted.
Bahnanwendungen - Bremsen - Bremsklotzschuh und Federriegel für Schienenfahrzeuge
Diese Europäische Norm gilt für Bremsklotzschuhe, Federriegel und Bremsklotzkeile, die in Schienenfahrzeugen eingebaut werden.
Bremsklotzschuhe, Federriegel und Bremsklotzkeile aus Nichteisenwerkstoffen werden in dieser Europäischen Norm nicht behandelt.
Diese Europäische Norm enthält Anforderungen an die konstruktive Ausführung, die Bewertungsprüfung zur Konformität und die Überwachung der Serienherstellung.
Die Anforderungen in dieser Europäischen Norm gelten für Bremsklotzschuhe, Federriegel und Bremsklotzkeile, mit denen die Schienenfahrzeuge von Vollbahnen und Privatbahnen (Regionalbahnen, Bahnen von Unternehmen) ausgerüstet sind.
Applications ferroviaires - Freinage - Porte-semelles et clavette de semelle de frein pour véhicules ferroviaires
La présente Norme européenne s’applique aux porte–semelles et aux clavettes de sabot de frein installés sur les véhicules ferroviaires.
Les porte-semelles et clavettes de sabot de frein, fabriqués en matériaux non ferreux, ne relèvent pas du présent document.
La présente Norme européenne contient des exigences concernant, la conception, l’évaluation des essais de conformité et le contrôle de la production en série.
Les exigences contenues dans la présente Norme européenne s’appliquent aux porte-semelles et aux clavettes de sabot de frein montés sur les véhicules ferroviaires des chemins de fer « Grandes lignes » et des chemins de fer privés (chemins de fer régionaux, chemins de fer internes à des entreprises).
Železniške naprave - Zavore - Nosilec zavorne ploščice in okovski zavorni ključ za železniška vozila
Ta evropski standard se uporablja za nosilce zavornih ploščic in okovske zavorne ključe, nameščene na železniških vozilih.
Nosilci zavornih ploščic in okovski zavorni ključi, izdelani iz neželeznih materialov, niso predmet tega evropskega standarda. Ta evropski standard zajema zahteve za oblikovanje, ocenjevalno preskušanje skladnosti in spremljanje serijske proizvodnje.
Zahteve iz tega evropskega standarda se uporabljajo za nosilce zavornih ploščic in okovske zavorne ključe, ki so nameščeni na železniških vozilih glavnih železniških prog in zasebnih železniških prog (regionalne železniške proge, železniške proge podjetij).
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Bremsen - Bremsklotzhalter und Bremsklotzkeil für SchienenfahrzeugeApplications ferroviaires — Freinage — Porte-semelles et clavette de semelle de frein pour véhicules ferroviairesRailway applications - Braking - Brake block holder and brake shoe key for rail vehicles45.040Materiali in deli za železniško tehnikoMaterials and components for railway engineeringICS:Ta slovenski standard je istoveten z:EN 15329:2015SIST EN 15329:2015en,fr,de01-oktober-2015SIST EN 15329:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15329
June 2015 ICS 45.060.01; 45.040 English Version
Railway applications - Braking - Brake block holder and brake shoe key for railway vehicles
Applications ferroviaires - Freinage - Porte-semelles et clavette de semelle de frein pour véhicules ferroviaires
Bahnanwendungen - Bremsen - Bremsklotzhalter und Bremsklotzkeil für Schienenfahrzeuge This European Standard was approved by CEN on 19 January 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15329:2015 ESIST EN 15329:2015
Foreword .4 Introduction .5 1 Scope .6 2 Normative references .6 3 Terms and definitions .6 4 Symbols and abbreviations .7 4.1 Symbols .7 4.2 Abbreviations .7 5 Materials .7 5.1 General .7 5.2 Material for brake block holder .7 5.3 Material for brake shoe key and brake block key .7 5.4 Corrosion protection .8 6 Design .8 6.1 Brake block holders .8 6.2 Brake shoe key/Brake block key .8 7 Markings .9 7.1 General .9 7.2 Brake block holder.9 7.3 Brake shoe key and brake block key .9 8 Type testing .9 8.1 General .9 8.2 Type testing for brake block holders . 10 9 Series testings . 12 Annex A (normative)
Simple and double brake block holder for brake shoes with a low friction factor . 13 A.1 Geometric characteristics . 13 A.2 Interchangeability requirements for brake block holders intended to be mounted on the rigging . 19 Annex B (normative)
Simple and double brake block holder for brake shoes with a high friction factor . 21 B.1 Geometric characteristics . 21 B.2 Interchangeability requirements for brake block holders intended to be mounted on the rigging . 27 Annex C (informative)
Brake block holder – Type Bdg, brake block, brake shoe key . 29 Annex D (informative)
Brake shoe keys . 30 Annex E (informative)
Minimum details provided in the invitation to tender and in the order . 32 Annex F (informative)
Supply . 33 F.1 Brake shoe key and brake block key . 33 SIST EN 15329:2015
Marking . 34 G.1 The interchangeability sign U . 34 Bibliography . 35
Note 1 to entry: This definition generally corresponds to cast iron brake blocks and composite material type L or LL brake blocks. 3.6 brake block with high friction factor brake block with a high friction factor of 0,25 to 0,30
Note 1 to entry: This definition generally corresponds to composite material type K brake blocks. SIST EN 15329:2015
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.