EN ISO 15877-3:2009/A1:2010
(Amendment)Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 1 (ISO 15877-3:2009/AMD 1:2010)
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 1 (ISO 15877-3:2009/AMD 1:2010)
2009-04-02 EMA: VA information and track changed from ISO Lead to CEN Lead after ISO notification (see e-mail sent on 2009-04-01).
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-C) - Teil 3: Formstücke - Änderung 1 (ISO 15877-3:2009/AMD 1:2010)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 3: Raccords - Amendement 1 (ISO 15877-3:2009/AMD 1:2010)
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Klorirani polivinilklorid (PVC-C) - 3. del: Fitingi - Dopolnilo 1 (ISO 15877-3:2009/AMD 1:2010)
Ta del ISO 15877 določa značilnosti fitingov iz kloriranega polivinilklorida (PVC-C) za cevne sisteme, namenjene uporabi za napeljave z vročo in hladno vodo v stavbah za prenos pitne ali nepitne vode (domači sistemi) in za grelne sisteme pod računskimi tlaki in pri temperaturah, primernih za razred uporabe (glej preglednico 1 iz ISO 15877-1:2009). Ta del ISO 15877 zajema razpon pogojev delovanja (razrede uporabe) in razrede računskega tlaka. Za vrednosti TD, Tmax in Tmal, ki so višje od tistih v preglednici 1 iz ISO 15877-1:2009, ta del ISO 15877 ne velja. Prav tako določa parametre za preskusne metode, navedene v tem delu ISO 15877. Skupaj z drugimi deli ISO 15877 velja za PVC-C fitinge, njihove spoje in spoje s komponentami iz PVC-C, druge polimerne materiale in materiale, ki niso polimerni, namenjeni uporabi za napeljave z vročo in hladno vodo. Ta del ISO 15877 velja za fitinge naslednjih vrst: – fitinge za lepljene spoje; – mehanske fitinge; – fitinge z vgrajenimi vstavki.
General Information
- Status
- Published
- Publication Date
- 31-Oct-2010
- Withdrawal Date
- 30-May-2011
- Technical Committee
- CEN/TC 155 - Plastics piping systems and ducting systems
- Drafting Committee
- CEN/TC 155/WG 16 - Systems for hot and cold water applications
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 01-Nov-2010
- Due Date
- 27-Feb-2012
- Completion Date
- 01-Nov-2010
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 11-Mar-2009
Overview
EN ISO 15877-3:2009/A1:2010 is an amendment standard under the EN ISO 15877 series, focusing on plastics piping systems for hot and cold water installations made from chlorinated poly(vinyl chloride) (PVC-C). This amendment specifically addresses fittings used in PVC-C piping systems, updating requirements and testing protocols to enhance safety, reliability, and performance.
Developed collaboratively by the European Committee for Standardization (CEN) and the International Organization for Standardization (ISO), this standard is a key reference for manufacturers, engineers, and installers engaged in plumbing and water supply systems. It aligns with ISO/TC 138 and CEN/TC 155, technical committees specialized in plastics piping and fittings.
Key Topics
Scope of Amendment 1
This amendment introduces Class 4 fittings as defined by ISO 10508 to address low-temperature heating applications commonly found in some countries. It modifies testing requirements and material stress limits to ensure robustness for operating pressures of 4 and 6 bars.Material Specifications
Focuses on chlorinated poly(vinyl chloride) (PVC-C) Type I materials suitable for hot and cold water installations, ensuring compatibility with operational temperature ranges and mechanical loads.Testing Requirements
Provides updated hydrostatic test pressures based on design class (Class 1, 2, and 4), temperature, and test duration. For example:- Maximum design temperatures up to 80 °C for Classes 1 and 2, 70 °C for Class 4.
- Design stresses and hydrostatic stresses specified in MPa, adjusted for testing conditions at 20 °C, 60 °C, and 80 °C.
- Test pressures calibrated for design pressures of 4, 6, 8, and 10 bars depending on class and test temperature.
Compliance and Regulatory Alignment
Mandates adherence to CEN/CENELEC internal regulations for integration into national standards without alterations, supporting uniformity across European markets.Multilingual Documentation & Accessibility
Published in official CEN languages (English, French, German) with valid translations maintaining equal status, facilitating broad adoption.
Applications
Hot and Cold Water Installations
Enables safe and efficient piping solutions for domestic and commercial water supply systems, catering to both cold and heated water distribution.Low-Temperature Heating Systems
Introduces suitable fittings for PVC-C piping in heating installations operating at moderate temperatures and pressures, extending the material's application scope.Building and Infrastructure Projects
Ensures fittings meet stringent safety and performance standards for municipal, residential, and industrial water systems, minimizing leakage and maximizing durability.Manufacturing and Quality Assurance
Provides clear testing protocols for manufacturers to validate hydrostatic resistance and material integrity of PVC-C fittings, ensuring products meet international quality benchmarks.
Related Standards
ISO 15877-1 and ISO 15877-2
Cover general requirements and pipes respectively for PVC-C piping systems, complementing Part 3 which focuses on fittings.ISO 10508
Defines material classes, including the Class 4 referenced in this amendment for low-temperature heating applications.EN ISO 15877 Series
Comprehensive guidance on design, performance, and testing of PVC-C plastic piping systems for water installations.CEN/CENELEC Internal Regulations
Provide framework for standard harmonization in Europe, ensuring this amendment becomes part of nationally adopted standards.
Keywords: PVC-C fittings standard, plastics piping system, chlorine polyvinyl chloride, hot water installation, cold water installation, EN ISO 15877 amendment, hydrostatic test pressure, water supply system fittings, plastics pipe standards, low-temperature heating piping, PVC-C Type I, CEN standard, ISO/TC 138, piping system testing protocols.
Frequently Asked Questions
EN ISO 15877-3:2009/A1:2010 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 1 (ISO 15877-3:2009/AMD 1:2010)". This standard covers: 2009-04-02 EMA: VA information and track changed from ISO Lead to CEN Lead after ISO notification (see e-mail sent on 2009-04-01).
2009-04-02 EMA: VA information and track changed from ISO Lead to CEN Lead after ISO notification (see e-mail sent on 2009-04-01).
EN ISO 15877-3:2009/A1:2010 is classified under the following ICS (International Classification for Standards) categories: 23.040.01 - Pipeline components and pipelines in general; 23.040.45 - Plastics fittings; 91.140.60 - Water supply systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 15877-3:2009/A1:2010 has the following relationships with other standards: It is inter standard links to EN ISO 15877-3:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 15877-3:2009/A1:2010 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN ISO 15877-3:2009/A1:2010 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 15877-3:2009/oprA1:2009
01-september-2009
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
.ORULUDQLSROLYLQLONORULG 39&& GHO )LWLQJL'RSROQLOR ,62
'$0
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl
chloride) (PVC-C) - Part 3: Fittings - Amendment 1 (ISO 15877-3:2009/DAM 1:2009)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes
Polyvinylchlorid (PVC-C) - Teil 3: Formstücke - Änderung 1 (ISO 15877-3:2009/DAM
1:2009)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Poly(chlorure de vinyle) chloré (PVC-C) - Partie 3: Raccords - Amendement 1 (ISO
15877-3:2009/DAM 1:2009)
Ta slovenski standard je istoveten z: EN ISO 15877-3:2009/prA1
ICS:
23.040.45 Fitingi iz polimernih Plastics fittings
materialov
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN ISO 15877-3:2009/oprA1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN ISO 15877-3:2009/oprA1:2009
SIST EN ISO 15877-3:2009/oprA1:2009
EUROPEAN STANDARD
DRAFT
EN ISO 15877-3:2009
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2009
ICS 23.040.45; 91.140.60
English Version
Plastics piping systems for hot and cold water installations -
Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings -
Amendment 1 (ISO 15877-3:2009/DAM 1:2009)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Poly(chlorure de Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-
vinyle) chloré (PVC-C) - Partie 3: Raccords - Amendement C) - Teil 3: Formstücke - Änderung 1 (ISO 15877-
1 (ISO 15877-3:2009/DAM 1:2009) 3:2009/DAM 1:2009)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 155.
This draft amendment A1, if approved, will modify the European Standard EN ISO 15877-3:2009. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15877-3:2009/prA1:2009: E
worldwide for CEN national Members.
SIST EN ISO 15877-3:2009/oprA1:2009
EN ISO 15877-3:2009/prA1:2009 (E)
Contents Page
Foreword .3
SIST EN ISO 15877-3:2009/oprA1:2009
EN ISO 15877-3:2009/prA1:2009 (E)
Foreword
This document (EN ISO 15877-3:2009/prA1:2009) has been prepared by Technical Committee CEN/TC 155
“Plastics piping systems and ducting systems", the secretariat of which is held by NEN, in collaboration with
Technical Committee ISO/TC 138 "Plastics pipes, fittings and valves for the transport of fluids".
This document is currently submitted to the parallel Enquiry.
SIST EN ISO 15877-3:2009/oprA1:2009
SIST EN ISO 15877-3:2009/oprA1:2009
DRAFT AMENDMENT ISO 15877-3:2009/DAmd 1
ISO/TC 138/SC 2 Secretariat: SNV
Voting begins on: Voting terminates on:
2009-06-11 2009-11-11
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Plastics piping systems for hot and cold water installations —
Chlorinated poly(vinyl chloride) (PVC-C) —
Part 3:
Fittings
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Poly(chlorure de vinyle)
chloré (PVC-C) —
Partie 3: Raccords
AMENDEMENT 1
ICS 23.040.45; 91.140.60
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the European Committee for Standardization (CEN), and processed
under the CEN-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
...
SLOVENSKI STANDARD
01-marec-2011
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
.ORULUDQLSROLYLQLONORULG 39&& GHO )LWLQJL'RSROQLOR ,62
$0'
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl
chloride) (PVC-C) - Part 3: Fittings - Amendment 1 (ISO 15877-3:2009/AMD 1:2010)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Chloriertes
Polyvinylchlorid (PVC-C) - Teil 3: Formstücke - Änderung 1 (ISO 15877-3:2009/AMD
1:2010)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide -
Poly(chlorure de vinyle) chloré (PVC-C) - Partie 3: Raccords - Amendement 1 (ISO
15877-3:2009/AMD 1:2010)
Ta slovenski standard je istoveten z: EN ISO 15877-3:2009/A1:2010
ICS:
23.040.45 Fitingi iz polimernih Plastics fittings
materialov
91.140.60 Sistemi za oskrbo z vodo Water supply systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 15877-3:2009/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2010
ICS 23.040.45; 91.140.60
English Version
Plastics piping systems for hot and cold water installations -
Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings -
Amendment 1 (ISO 15877-3:2009/AMD 1:2010)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Poly(chlorure de Kaltwasserinstallation - Chloriertes Polyvinylchlorid (PVC-
vinyle) chloré (PVC-C) - Partie 3: Raccords - Amendement C) - Teil 3: Formstücke - Änderung 1 (ISO 15877-
1 (ISO 15877-3:2009/AMD 1:2010) 3:2009/AMD 1:2010)
This amendment A1 modifies the European Standard EN ISO 15877-3:2009; it was approved by CEN on 31 October 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15877-3:2009/A1:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 15877-3:2009/A1:2010) has been prepared by Technical Committee CEN/TC 155
“Plastics piping systems and ducting systems” the secretariat of which is held by NEN, in collaboration with
Technical Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids”.
This Amendment to the European Standard EN ISO 15877-3:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by May 2011, and
conflicting national standards shall be withdrawn at the latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
INTERNATIONAL ISO
STANDARD 15877-3
Second edition
2009-03-15
AMENDMENT 1
2010-11-01
Plastics piping systems for hot and cold
water installations — Chlorinated
poly(vinyl chloride) (PVC-C) —
Part 3:
Fittings
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...