EN 941:1995
(Main)Aluminium and aluminium alloys - Circle and circle stock for general application - Specifications
Aluminium and aluminium alloys - Circle and circle stock for general application - Specifications
This standard specifies the particular requirements for wrought aluminium and aluminium alloys in the form of circle or circle stock for general applications.It applies to: 1) circles made out of hot or cold-rolled circle stock by: - blanking: thickness 0,2 mm up to and including 12 mm and with a diameter up to 1000 mm; - sawing or shearing: thickness 0,2 mm up to and including 200 mm with a diameter up to 3500 mm. 2) hot or cold-rolled circle stock with a thickness from 0,2 mm up to and including 200 mm and with a width up to 3500 mm.
Aluminium und Aluminiumlegierungen - Ronden und Rondenvormaterial für allgemeine Anwendungen - Spezifikationen
Die vorliegende Norm legt die besonderen Anforderungen für Ronden und Rondenvormaterial aus Aluminium und Aluminium-Knetlegierungen fest, die für allgemeine Anwendungen eingesetzt werden. Sie gilt für: 1) Ronden, die aus kalt- bzw. warmgewalztem Rondenvormaterial wie folgt hergestellt werden: - durch Stanzen (geschlossener Schnitt): Dicke von 0,2 mm bis 12 mm und einem Durchmesser bis 1000 mm; - durch Sägen oder Schneiden (offener Schnitt): Dicke von 0,2 mm bis 200 mm und einem Durchmesser bis 3500 mm; 2) Kalt- bzw. warmgewalztes Rondenvormaterial mit einer Dicke von 0,2 bis 200 mm.
Aluminium et alliages d'aluminium - Disques et ébauches pour disques pour applications générales - Spécifications
La présente norme spécifie les exigences particulières applicables aux aluminium et alliages d'aluminium corroyés sous forme de disques et ébauches à disques à usage général. Elle s'applique aux: 1) disques fabriqués à partir d'ébauches à disques laminées à chaud ou à froid par: - poinçonnage: épaisseur comprise entre 0,2 mm et 12 mm inclus, et diamètre ne dépassant pas 1000 mm; - sciage ou cisaillage: épaisseur comprise entre 0,2 mm et 200 mm inclus, et diamètre ne dépassant pas 3500 mm. 2) ébauches à disques laminées à chaud ou à froid, d'épaisseur compr. entre 0,2 et 200 mm inclus et de largeur < 3500 mm.
Aluminij in aluminijeve zlitine - Rondele in polizdelki za splošno uporabo - Specifikacije
General Information
- Status
- Withdrawn
- Publication Date
- 27-Jun-1995
- Withdrawal Date
- 29-Apr-2014
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 7 - Sheets, strips and plates
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 30-Apr-2014
- Completion Date
- 30-Apr-2014
Relations
- Effective Date
- 07-May-2014
Frequently Asked Questions
EN 941:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Circle and circle stock for general application - Specifications". This standard covers: This standard specifies the particular requirements for wrought aluminium and aluminium alloys in the form of circle or circle stock for general applications.It applies to: 1) circles made out of hot or cold-rolled circle stock by: - blanking: thickness 0,2 mm up to and including 12 mm and with a diameter up to 1000 mm; - sawing or shearing: thickness 0,2 mm up to and including 200 mm with a diameter up to 3500 mm. 2) hot or cold-rolled circle stock with a thickness from 0,2 mm up to and including 200 mm and with a width up to 3500 mm.
This standard specifies the particular requirements for wrought aluminium and aluminium alloys in the form of circle or circle stock for general applications.It applies to: 1) circles made out of hot or cold-rolled circle stock by: - blanking: thickness 0,2 mm up to and including 12 mm and with a diameter up to 1000 mm; - sawing or shearing: thickness 0,2 mm up to and including 200 mm with a diameter up to 3500 mm. 2) hot or cold-rolled circle stock with a thickness from 0,2 mm up to and including 200 mm and with a width up to 3500 mm.
EN 941:1995 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 941:1995 has the following relationships with other standards: It is inter standard links to EN 941:2014. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 941:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1998
Aluminij in aluminijeve zlitine - Rondele in polizdelki za splošno uporabo -
Specifikacije
Aluminium and aluminium alloys - Circle and circle stock for general application -
Specifications
Aluminium und Aluminiumlegierungen - Ronden und Rondenvormaterial für allgemeine
Anwendungen - Spezifikationen
Aluminium et alliages d'aluminium - Disques et ébauches pour disques pour applications
générales - Spécifications
Ta slovenski standard je istoveten z: EN 941:1995
ICS:
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...