EN ISO 10240:2020

SLOVENSKI STANDARD
01-marec-2020
Nadomešča:
SIST EN ISO 10240:2005
SIST EN ISO 10240:2005/A1:2015
Mala plovila - Priročnik za uporabo (ISO 10240:2019)
Small craft - Owner's manual (ISO 10240:2019)
Kleine Wasserfahrzeuge - Eignerhandbuch (ISO 10240:2019)
Petits navires - Manuel du propriétaire (ISO 10240:2019)
Ta slovenski standard je istoveten z: EN ISO 10240:2020
ICS:
47.080 Čolni Small craft
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 10240
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2020
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 10240:2004
English Version
Small craft - Owner's manual (ISO 10240:2019)
Petits navires - Manuel du propriétaire (ISO Kleine Wasserfahrzeuge - Eignerhandbuch (ISO
10240:2019) 10240:2019)
This European Standard was approved by CEN on 12 December 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10240:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 10240:2020) has been prepared by Technical Committee ISO/TC 188 "Small
craft" in collaboration with Technical Committee CEN/SS T01 “Shipbuilding and maritime structures”
the secretariat of which is held by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2020, and conflicting national standards shall be
withdrawn at the latest by July 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10240:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10240:2019 has been approved by CEN as EN ISO 10240:2020 without any modification.

INTERNATIONAL ISO
STANDARD 10240
Third edition
2019-12
Small craft — Owner's manual
Petits navires — Manuel du propriétaire
Reference number
ISO 10240:2019(E)
©
ISO 2019
ISO 10240:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 10240:2019(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 General requirements . 2
4.1 Information required . 2
4.2 Format . 2
4.3 Units and definitions . 3
4.4 Illustrations . 3
5 Content of owner's manual . 3
5.1 General . 3
5.2 Introduction to the manual . 3
5.3 General information and craft data . 3
5.4 Maximum number of persons . 6
5.5 Loading . 6
5.6 Engine information . 7
5.7 Information connected with the risk of flooding and stability . 7
5.7.1 General. 7
5.7.2 Openings in the hull . 7
5.7.3 Bilge pumps and bailing . 7
5.7.4 Stability and buoyancy . . . 8
5.7.5 Capsize recovery . 8
5.7.6 Habitable multihull susceptible to inversion . 8
5.7.7 Grounding . 8
5.8 Information connected with the risk of fire or explosion . 8
5.8.1 General. 8
5.8.2 Propulsion engines, generator sets, etc. . 8
5.8.3 Gas system . 9
5.8.4 Other fuel-burning systems . 9
5.8.5 Fire prevention and fire-fighting equipment . 9
5.8.6 Means of fire escape . 9
5.9 Electrical systems — Risks of fire, explosion or electric shocks . 9
5.10 Handling characteristics .10
5.10.1 Motor craft.10
5.10.2 Engine starting .10
5.10.3 Emergency steering . .10
5.11 Proper operation — Other recommendations and information .10
5.11.1 Man-overboard prevention and recovery .10
5.11.2 Liferaft stowage .11
5.11.3 Danger from moving parts of machinery .11
5.11.4 Ventilation when using a combustion device .11
5.11.5 Securing of loose equipment .11
5.11.6 Respect for environment .11
5.11.7 Use of holding tanks .11
5.11.8 Anchoring, mooring and towing .12
5.11.9 Trailering (if relevant).12
5.12 Sailboat spars and rigging .12
6 Other information .12
Annex A (informative) General introduction for the owner's manual .13
Annex B (informative) List of International Standards requiring information and safety
labels to be inserted in the owner's manual .14
ISO 10240:2019(E)
Bibliography .
...