Aerospace series - Quality systems - Record retention

1.1 General
This document provides requirements and guidance for the retention, storage, retrieval and disposal of records for the international aviation, space and defense industry.
1.2 Applicability
1.2.1 This document is applicable to all documents and data records, on current and earlier products, produced using current and previous business agreements and applicable statutory and regulatory requirements.
1.2.2 Documents should be interpreted in the broadest possible sense to include all records, data and information, in paper or in electronic form or on film, including external providers working on own behalf.
1.2.3 Some documents may be retained electronically. The form in which documents are to be retained varies from one jurisdiction to another and varies depending on the document involved. Some countries prescribe that certain documents be retained in their original form as a hardcopy (e.g. board minutes, documents under seal, trust documents and original documents that are subject to specific legal requirements…).

Luft- und Raumfahrt - Qualitätsmanagement - Aufbewahren von Aufzeichnungen

1.1 Allgemeines
Dieses Dokument stellt Anforderungen und einen Leitfaden für die Aufbewahrung, Speicherung, Bereitstellung und Entsorgung von Aufzeichnungen für die internationale Luftfahrt , Raumfahrt  und Verteidigungsindustrie bereit.
1.2 Anwendbarkeit
1.2.1 Diese Norm gilt für alle Dokumente und Datenaufzeichnungen, bei gegenwärtigen und früheren Produkten, die unter Anwendung gegenwärtiger oder früherer Geschäftsvereinbarungen und geltender gesetzlicher und behördlicher Anforderungen hergestellt wurden.
1.2.2 „Dokumente“ sollte im weitest möglichen Sinn verstanden werden, um sämtliche Aufzeichnungen, Daten und Informationen, in elektronischer oder Papierform oder auf Film einzuschließen, einschließlich die von externen Anbietern, die im eigenen Namen arbeiten.
1.2.3 Einige Dokumente dürfen elektronisch aufbewahrt werden. Die Form, in der Dokumente aufzubewahren sind, unterscheidet sich von einem Zuständigkeitsbereich zum anderen und ist abhängig vom jeweiligen Dokument. In einigen Ländern wird vorgeschrieben, dass bestimmte Dokumente in ihrer Originalform als Hardcopy (z. B. Vorstandsprotokolle, Dokumente unter Verschluss, vertrauliche Dokumente und Originaldokumente, die Gegenstand spezifischer gesetzlicher Anforderungen sind) aufzubewahren sind.

Série aérospatiale - Systèmes qualité - Conservation d'enregistrements

1.1 Généralités
Le présent document fournit des exigences et des recommandations pour la conservation, le stockage, la récupération et l’élimination d’enregistrements destinées à l'industrie aéronautique, spatiale et de la défense internationale.
1.2 Applicabilité
1.2.1 Le présent document s’applique à tous les enregistrements de documents et de données, sur des produits actuels ou antérieurs, produits à partir d’accords commerciaux en cours ou passés, et d’exigences légales et réglementaires applicables.
1.2.2 Il convient d’interpréter le terme « documents » au sens le plus large possible afin d’englober tous enregistrements, données et informations, aux formats papier, électronique ou sur film, y compris ceux des prestataires externes travaillant en leur nom.
1.2.3 Certains documents peuvent être conservés au format électronique. La forme sous laquelle les documents sont tenus d’être conservés varie d’une juridiction à l’autre, mais également en fonction du document concerné. Certains pays prescrivent la conservation de certains documents dans leur format original, en version papier (par exemple : procès-verbaux de conseil d’administration, documents sous scellés, actes de fiducie et documents originaux qui sont sujets à des exigences légales spécifiques, etc.).

Aeronavtika - Sistemi vodenja kakovosti - Hramba dokumentov

General Information

Status
Published
Publication Date
07-Jul-2020
Withdrawal Date
30-Jan-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
08-Jul-2020
Completion Date
08-Jul-2020

Buy Standard

Standard
EN 9130:2020
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2020
Aeronavtika - Sistemi vodenja kakovosti - Hramba dokumentov
Aerospace series - Quality systems - Record retention
Luft- und Raumfahrt - Qualitätsmanagement - Aufbewahrung von Aufzeichnungen
Série aérospatiale - Systèmes qualité - Conservation d'enregistrements
Ta slovenski standard je istoveten z: EN 9130:2020
ICS:
03.120.10 Vodenje in zagotavljanje Quality management and
kakovosti quality assurance
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 9130
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2020
EUROPÄISCHE NORM
ICS 03.120.10; 49.020
English Version
Aerospace series - Quality systems - Record retention
Série aérospatiale - Systèmes qualité - Conservation Luft- und Raumfahrt - Qualitätsmanagement -
d'enregistrements Aufbewahrung von Aufzeichnungen
This European Standard was approved by CEN on 22 December 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 9130:2020 E
worldwide for CEN national Members.

Contents
Page
European foreword . 3
1 Scope . 4
1.1 General . 4
1.2 Applicability . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Documents and Data Records to be Retained and Retention Periods . 6
5 Means of retention . 6
5.1 Recording media. 6
5.2 Electronic storage and archiving . 6
5.3 Archiving and Retrieval Conditions . 7
5.4 Retention Responsibility Sharing between Customers and External Providers . 8
5.5 Disposal of Documents and Data Records . 8
Annex A (informative) Documents and Data Records Retention Matrix . 9
Bibliography . 18

European foreword
This document (EN 9130:2020) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2021, and conflicting national standards shall
be withdrawn at the latest by January 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
1 Scope
1.1 General
This document provides requirements and guidance for the retention, storage, retrieval and disposal of
records for the international aviation, space and defense industry.
1.2 Applicability
1.2.1 This document is applicable to all documents and data records, on current and earlier products,
produced using current and previous business agreements and applicable statutory and regulatory
requirements.
1.2.2 Documents should be interpreted in the broadest possible sense to include all records, data and
information, in paper or in electronic form or on film, including external providers working on own
behalf.
1.2.3 Some documents may be retained electronically. The form in which documents are to be retained
varies from one jurisdiction to another and varies depending on the document involved. Some countries
prescribe that certain documents be retained in their original form as a hardcopy (e.g. board minutes,
documents under seal, trust documents and original documents that are subject to specific legal
requirements…).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 9300-003, Aerospace series — LOTAR — Long term archiving and retrieval of digital technical
product documentation such as 3D, CAD and PDM data — Part 003: Fundamentals and concepts
EN ISO 9000:2015, Quality management systems — Fundamentals and vocabulary
AS/EN/JISQ 9100, Quality Management Systems — Requirements for Aviation, Space and Defence
Organizations
AS/EN/JISQ 9110, Quality Management Systems — Requirements for Aviation Maintenance
Organizations
AS/EN/JISQ 9120, Quality Management Systems — Requirements for Aviation, Space and Defence
Distributors
These requirements are based on ISO 9001.
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN ISO 9000:2015 and the
following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
 ISO Online browsing platform: available at http://www.iso.org/obp
 IEC Electropedia: available at http://www.electropedia.org/
3.1
archive(s)
permanent records, records maintained for continuing use
Note 1 to entry: Archives can be a place where archival materials are preserved and made available for
consultation. This is also referred to as an archival repository.
Note 2 to entry: Archives can be an organization, agency or programme responsible for selecting, acquiring,
preserving and making available archives. This is sometimes referred to as an archival agency, archival institution,
or archival programme (ISO 30300).
3.2
archiving (electronic)
process of moving one or more electronic record extracts to off-line storage in a way that ensures the
possibility of restoring them to on-line storage when needed without loss of meaning. Wherever
possible, archived data should be technology-independent so that future users do not have
dependencies on obsolete technology from the past
[SOURCE: ISO 10781]
3.3
data integrity
property that data has not been altered or destroyed in an unauthorized manner
[SOURCE: ISO 7498-2:1989, 3.3.21]
3.4
digital signature
data appended to, or a cryptographic transformation of, a data unit that allows a recipient of the data
unit to prove the source and integrity of the data unit and protect against forgery, e.g. by the recipient
[SOURCE: ISO 7498-2:1989, 3.3.26]
3.5
life of product (LOP)
end of product operational life time, when the last product of a type has been withdrawn
3.6
records management
field of management responsible for the efficient and systematic control of the creation, receipt,
maintenance, use and disposition of records, including processes for capturing and maintaining
evidence of and information about business activities and transactions in the form of records
[SOURCE: ISO 15489-1:2016, 3.15]
Note 1 to entry: Also called recordkeeping.
3.7
retention
storage of data for reuse of a later date:
 aiming for data re-use and to keep data available;
 retaining any of the representations needed, but not the presentations;
 working over medium and short term;
 expecting invariance, though this is not mandatory;
 migration of the data format is allowed to guaranty data quality and interpretability (EN 9300-003)
4 Documents and Data Records to be Retained and Retention Periods
4.1 Records related to traceable products shall be kept not less than the operational life of the
applicable product (LOP).
NOTE At the level of an organization, the decision on traceable products may have an impact on the retention
period of the related documentation.
4.2 Annex A provides a matrix with recommended minimum retention duration and record examples
for the different types of documents and data as addressed in the aerospace standard
AS/EN/SJAC 9100.
NOTE Deviations of the retention duration (e.g. due to country-specific legal and/or regulatory
requirements) should be recorded in written statements or in the business agreements.
5 Means of retention
5.1 Recording media
5.1.1 Media (paper, film, magnetic etc.) used for recording shall allow the required duration for
retention under the conditions provided.
5.1.2 Retained documents and data records shall remain readable for the period of archiving, together
with due provision of any technological facility required (e.g. electronic readers, software,
computers etc.).
5.2 Electronic storage and archiving
NOTE The ISO/IEC 27000 standards series provides guidance to ensure the selection of adequate and
proportionate security controls that protect information assets and give confidence to interested parties.
5.2.1 In case of electronic storage of signed/stamped originals either scanning hence allowing to
restore the full original, a publically acceptable data transcription format and process shall be
employed.
NOTE Acceptable formats and processes are the ones providing from the digital sources paper documents,
which are identical to the originals.
5.2.2 If applicable, the organization shall ensure confirmation from local authority representative that
the proposed electronic recording media is acceptable.
5.2.3 When hardware and software changes take place, the transcription process shall be clearly
defined and controlled, in order to ensure that all necessary data continue to be accessible.
5.2.4 Back-up procedures shall be implemented for all electronic data held on computers, which are
under the scope of this standard.
5.2.5 Back-up copies shall be stored in a different location from that containing the working media
(e.g. discs, tapes etc.), in an environment that ensures they remain in good condition for retrieval.
5.3 Archiving and Retrieval Conditions
5.3.1 Documents and data records shall be maintained legible for the retention period.
5.3.2 The record keeping system shall ensure that all records are
a) accessible whenever needed within a reasonable time and
b) organized in a consistent way (e. g. chronological, alphabetical order etc.).
NOTE Organizations should clarify what is an acceptable time to access any stored record from the record
keeping system. Organizations should also clarify what is an acceptable way to organize documented information
and which are the criteria for retrieving information (e.g. keywords, etc.).
5.3.3 Documents and data records shall be stored
a) in a safe manner with regard to natural disasters (such e.g. fire, flood etc.) and
b) according to well documented conditions ensuring that they are readily retrievable and available
for secured and controlled access.
5.3.4 Access to archives shall be controlled to
a) prevent theft, negligence, malicious or fraudul
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.