EN 13016-1:2000
(Main)Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP)
Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP)
This European Standard specifies a method for the determination of the total pressure, exerted in vacuo, by volatile, low viscosity petroleum products, components, and feedstocks containing air. An equivalent dry vapour pressure can be calculated from the air containing vapour pressure (ASVP) measurement. The conditions used in the test described in this standard are a vapour-to-liquid ratio of 4:1, a sample size of 1 l, and a test temperature of 37,8°C. Note 1 See annex A for information on the precision values when using 50 ml samples or using a test temperature of 50,0°C.
Flüssige Mineralölerzeugnisse - Dampfdruck - Teil 1: Bestimmung des luftgesättigten Dampfdruckes (ASVP)
Diese Europäische Norm beschreibt ein Verfahren zur Messung des absoluten Dampfdrucks, gemessen im Vakuum, ausgeübt von luftgesättigten, niedrigviskosen Mineralölerzeugnissen, Komponenten und Feedstocks. Ein Äquivalent zum "Trockenen Dampfdruck" (DVPE, siehe Abschnitt 12) kann aus diesem "Luftgesättigten Dampfdruck" (ASVP) berechnet werden. Die in dieser Norm bei der Prüfung vorgeschriebenen Prüfbedingungen sind ein Dampf-Flüssigkeitsverhältnis von 4:1, ein Probenvolumen von 1 l und eine Prüftemperatur von 37,8°C.
Produits pétroliers liquides - Pression de vapeur - Partie 1: Détermination de la pression de vapeur saturée en air (PVSA)
La présente Norme européenne prescrit une méthode de détermination de la pression totale exercée dans le vide par des produits pétroliers, des bases pétrolières et des constituants pétroliers, volatils, de faible viscosité et contenant de l'air. Il est possible de calculer une pression de vapeur sèche équivalente à partir de la mesure de la pression de vapeur saturée en air (PVSA). Les conditions mises en oeuvre dans l'essai décrit dans la présente Norme sont un rapport vapeur sur liquide de 4:1, un volume d'échantillon de 1 l et une température d'essai de 37,8°C.
Tekoči naftni proizvodi - Parni tlak - 1. del: Določevanje z zrakom nasičenega parnega tlaka (ASVP)
General Information
- Status
- Withdrawn
- Publication Date
- 22-Aug-2000
- Withdrawal Date
- 11-Sep-2007
- Technical Committee
- CEN/TC 19 - Petroleum products, lubricants and related products
- Drafting Committee
- CEN/TC 19/WG 15 - Vapour pressure methods
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 12-Sep-2007
- Completion Date
- 12-Sep-2007
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
ABS Quality Evaluations Inc.
American Bureau of Shipping quality certification.
Element Materials Technology
Materials testing and product certification.
ABS Group Brazil
ABS Group certification services in Brazil.
Sponsored listings
Frequently Asked Questions
EN 13016-1:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP)". This standard covers: This European Standard specifies a method for the determination of the total pressure, exerted in vacuo, by volatile, low viscosity petroleum products, components, and feedstocks containing air. An equivalent dry vapour pressure can be calculated from the air containing vapour pressure (ASVP) measurement. The conditions used in the test described in this standard are a vapour-to-liquid ratio of 4:1, a sample size of 1 l, and a test temperature of 37,8°C. Note 1 See annex A for information on the precision values when using 50 ml samples or using a test temperature of 50,0°C.
This European Standard specifies a method for the determination of the total pressure, exerted in vacuo, by volatile, low viscosity petroleum products, components, and feedstocks containing air. An equivalent dry vapour pressure can be calculated from the air containing vapour pressure (ASVP) measurement. The conditions used in the test described in this standard are a vapour-to-liquid ratio of 4:1, a sample size of 1 l, and a test temperature of 37,8°C. Note 1 See annex A for information on the precision values when using 50 ml samples or using a test temperature of 50,0°C.
EN 13016-1:2000 is classified under the following ICS (International Classification for Standards) categories: 75.160.20 - Liquid fuels. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13016-1:2000 has the following relationships with other standards: It is inter standard links to EN 13016-1:2007; is excused to EN 58:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13016-1:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2000
7HNRþLQDIWQLSURL]YRGL3DUQLWODNGHO 'RORþHYDQMH]]UDNRPQDVLþHQHJD
SDUQHJDWODND $693
Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated
vapour pressure (ASVP)
Flüssige Mineralölerzeugnisse - Dampfdruck - Teil 1: Bestimmung des luftgesättigten
Dampfdruckes (ASVP)
Produits pétrolier
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...