EN ISO 12404:2021
(Main)Soil and waste - Guidance on the selection and application of screening methods (ISO 12404:2021)
Soil and waste - Guidance on the selection and application of screening methods (ISO 12404:2021)
This document provides guidance on the selection and application of screening methods for assessing soil quality and waste characterization, including distribution of target parameters in soil and soil‑like material. The aim of this document is to set up criteria as to when the different kind of screening methods can be applied for the analysis of a certain parameter in soil, including soil‑like material, and waste, and which steps are required to prove their suitability.
This document does not recommend any particular screening method but confirms the principles of their selection and application.
Boden und Abfall - Anleitung für die Auswahl und Anwendung von Screening-Verfahren (ISO 12404:2021)
Dieses Dokument gibt Anleitung zur Auswahl und Anwendung von Screening Verfahren für die Bewertung der Bodenbeschaffenheit und zur Charakterisierung von Abfällen, einschließlich der Verteilung von Zielparametern im Boden und bodenähnlichen Feststoffen. Ziel dieses Dokuments ist es, Kriterien dafür aufzustellen, wann die verschiedenen Arten von Screening Verfahren für die Analyse eines bestimmten Parameters im Boden, einschließlich bodenähnlichen Feststoffs, und Abfall angewendet werden können und welche Schritte zum Nachweis ihrer Eignung erforderlich sind.
Dieses Dokument empfiehlt kein bestimmtes Screening Verfahren, legt jedoch die Prinzipien dessen Auswahl und Anwendung fest.
Sol et déchets - Recommandations relatives à la sélection et à l'application des méthodes de diagnostic rapide (ISO 12404:2021)
Le présent document fournit des recommandations relatives à la sélection et à l’application de méthodes de diagnostic rapide pour l’évaluation de la qualité des sols et la caractérisation des déchets, y compris la répartition des paramètres cibles des sols et des solides assimilables aux sols. Le présent document a pour objet de fixer des critères permettant de décider dans quels cas les différents types de méthodes de diagnostic rapide peuvent être appliqués pour l’analyse d’un paramètre donné relatif à un sol, y compris un solide assimilable au sol, et à un déchet; il s’agit également de préciser quelles étapes sont nécessaires pour en démontrer l’adéquation.
Le présent document ne recommande aucune méthode de diagnostic rapide en particulier mais il confirme les principes de sélection et d’application de ces méthodes.
Tla in odpadki - Navodilo za izbiro in uporabo presejalnih metod (ISO 12404:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2021
Nadomešča:
SIST EN 16123:2013
SIST EN ISO 12404:2015
Tla in odpadki - Navodilo za izbiro in uporabo presejalnih metod (ISO 12404:2021)
Soil and waste - Guidance on the selection and application of screening methods (ISO
12404:2021)
Boden und Abfall - Anleitung für die Auswahl und Anwendung von Screening-Verfahren
(ISO 12404:2021)
Sol et déchets - Recommandations relatives à la sélection et à l'application des
méthodes de diagnostic rapide (ISO 12404:2021)
Ta slovenski standard je istoveten z: EN ISO 12404:2021
ICS:
13.080.10 Kemijske značilnosti tal Chemical characteristics of
soils
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 12404
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2021
EUROPÄISCHE NORM
ICS 13.080.10 Supersedes EN 16123:2013, EN ISO 12404:2015
English Version
Soil and waste - Guidance on the selection and application
of screening methods (ISO 12404:2021)
Sol et déchets - Recommandations relatives à la Boden und Abfall - Anleitung für die Auswahl und
sélection et à l'application des méthodes de diagnostic Anwendung von Screening-Verfahren (ISO
rapide (ISO 12404:2021) 12404:2021)
This European Standard was approved by CEN on 16 May 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12404:2021 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 12404:2021) has been prepared by Technical Committee ISO/TC 190 "Soil
quality" in collaboration with Technical Committee CEN/TC 444 “Environmental characterization of
solid matrices” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2021, and conflicting national standards
shall be withdrawn at the latest by December 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 16123:2013 and EN ISO 12404:2015.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 12404:2021 has been approved by CEN as EN ISO 12404:2021 without any modification.
INTERNATIONAL ISO
STANDARD 12404
Second edition
2021-06
Soil and waste — Guidance on the
selection and application of screening
methods
Sol et déchets — Recommandations relatives à la sélection et à
l'application des méthodes de diagnostic rapide
Reference number
ISO 12404:2021(E)
©
ISO 2021
ISO 12404:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
ISO 12404:2021(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principles . 1
5 Typical areas for application of screening methods . 2
5.1 General . 2
5.2 Support of sampling/sample preparation processes . 2
5.3 On-site verification . 2
5.4 Monitoring of processes . 2
5.5 Identification of homogeneity/heterogeneity of bulk material . 2
5.6 Survey of contaminated sites (hot-spot identification) . 2
5.7 Identification of sources of contamination . 2
5.8 Monitoring of large areas . 2
5.9 Safety issues . 3
6 Selection of a screening method . 3
6.1 General objectives . 3
6.2 Data quality objectives (DQOs) . 4
6.3 Selection criteria. 4
6.3.1 General. 4
6.3.2 Sampling/sample pre-treatment/preparation . 5
6.4 Checks for the selection of candidate methods . 5
6.4.1 General. 5
6.4.2 Parameter definition . 5
6.4.3 Field of application . 5
6.4.4 Method characteristics . 5
6.4.5 Boundary conditions . 6
6.5 Fit-for-purpose test . 6
6.6 Quality targets . 6
7 Applicability conditions for screening methods . 7
7.1 General . 7
7.2 Performance requirements . 7
7.3 Screening method applicability . 8
7.3.1 General. 8
7.3.2 Measurement conditions . 8
7.3.3 Principle of the measurement . 8
7.3.4 Instruction for method setup . 8
7.3.5 Sampling and samples. 9
7.3.6 Measurement steps. 9
7.3.7 Statement of results . 9
7.3.8 Sample and reagent disposal . 9
7.3.9 Characteristic data of the method . 9
8 Fit‑for‑purpose evaluation .10
8.1 General .10
8.2 Accuracy testing .10
8.3 Exclusion of false negative results .10
8.4 Testing of individual comparabi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.