EN 81-21:2009/FprA1
(Amendment)Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 21: New passenger and goods passenger lifts in existing builiding
Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 21: New passenger and goods passenger lifts in existing builiding
This European Standard specifies the safety rules related to new passenger and goods/passenger lifts permanently installed in existing buildings where in some circumstances due to limitations enforced by building constraints, some requirements of EN 81-1 and EN 81-2 cannot be met (see also 4th sentence of Introduction). This European Standard addresses a number of these constraints and gives requirements for alternative solutions. It shall be read and applied in conjunction with the European Standards EN 81-1 or EN 81-2 and their amendments A1:2005 and A2:2004, including their Clause 0. This European Standard covers: Either the construction and installation of one or more complete new lift(s) including new well and machinery spaces in an existing building; or The replacement of one or more existing lift(s) by new ones in existing well(s) and machinery spaces.This European Standard does not cover: Replacement or modifications of some parts to a lift already installed; Other applications outside of the scope of EN 81-1 or EN 81-2.This European Standard specifies the safety rules related to new passenger and goods/passenger lifts permanently installed in existing buildings where in some circumstances due to limitations enforced by building constraints, some requirements of EN 81-1 and EN 81-2 cannot be met (see also 4th sentence of Introduction). This European Standard addresses a number of these constraints and gives requirements for alternative solutions. It shall be read and applied in conjunction with the European Standards EN 81-1 or EN 81-2 and their amendments A1:2005 and A2:2004, including their Clause 0.This European Standard covers: Either the construction and installation of one or more complete new lift(s) including new well and machinery spaces in an existing building; or The replacement of one or more existing lift(s) by new ones in existing well(s) and machinery spaces. This European Standard does not cover: Replacement or modThis Europea
Sicherheitsregeln für die Konstruktion und den Einbau von Aufzügen - Aufzüge für den Personen- und Gütertransport - Teil 21: Neue Personen- und Lastenaufzüge in bestehenden Gebäuden
Règles de sécurité pour la construction et l'installation des élévateurs - Élévateurs pour le transport de personnes et de charges - Partie 21 : Ascenseurs et ascenseurs de charge neufs dans les bâtiments existants
Varnostna pravila za konstruiranje in vgradnjo dvigal (liftov) - Dvigala za prevoz oseb in blaga - 21. del: Nova osebna in tovorno-osebna dvigala v obstoječih stavbah - Dopolnilo A1
General Information
- Status
- Not Published
- Technical Committee
- CEN/TC 10 - Passenger, goods and service lifts
- Drafting Committee
- CEN/TC 10 - Passenger, goods and service lifts
- Current Stage
- 5060 - Closure of Vote - Formal Approval
- Start Date
- 15-Jun-2012
- Due Date
- 15-Feb-2013
- Completion Date
- 15-Jun-2012
Relations
- Effective Date
- 18-Jan-2023
- Effective Date
- 04-Jun-2011
Overview
EN 81-21:2009/FprA1 is a European Standard developed by CEN that defines essential safety rules for the construction and installation of new passenger and goods/passenger lifts specifically designed for existing buildings. This standard addresses scenarios where building constraints prevent full compliance with traditional lift standards EN 81-1 and EN 81-2. It offers alternative safety solutions tailored to the unique challenges posed by retrofitting lifts in older structures.
This standard complements and must be applied in conjunction with EN 81-1 and EN 81-2, including their amendments. It covers both the installation of entirely new lifts with new shafts and machinery spaces as well as the replacement of existing lifts using current wells and machinery rooms. However, it does not apply to partial lift modifications or replacements outside the scope of EN 81-1 or EN 81-2.
Key Topics
- Safety in Existing Buildings: Specifies safety requirements adapted for lifts in buildings where traditional standards cannot be fully met due to spatial or structural constraints.
- Scope of Application: Focuses on new lifts or full replacements permanently installed in existing wells or new shafts.
- Alternative Safety Measures: Provides requirements for alternative solutions where standard EN 81-1 or EN 81-2 rules are not feasible.
- Compliance Integration: Intended to be read alongside EN 81-1 and EN 81-2, ensuring compatibility and harmonization of lift safety.
- Safety Verification and User Information: Includes provisions for verifying safety measures and providing proper information for use.
- Technical Modifications: Updates references to EN 81-1 and EN 81-2 to use the current editions without amendments, reflecting the latest best practices.
Applications
EN 81-21:2009/FprA1 is critical for:
- Elevator Manufacturers and Installers: Ensuring lifts installed in existing buildings comply with up-to-date safety rules tailored to retrofit challenges.
- Building Owners and Facility Managers: Guiding modernization projects by defining safe installation and replacement options for lifts in constrained environments.
- Safety Inspectors and Regulatory Authorities: Establishing benchmarks for conformity checks on new or replaced passenger and goods lifts in older buildings.
- Architects and Engineers: Integrating lift safety solutions into renovation designs while accommodating structural limitations.
- Urban Development Projects: Enhancing accessibility and safety in heritage or existing buildings by facilitating compliant lift installations.
Related Standards
- EN 81-1: Safety rules for the construction and installation of electric lifts.
- EN 81-2: Safety rules for the construction and installation of hydraulic lifts.
- EN 81-1/A1 and A2 and EN 81-2/A1 and A2: Amendments updating safety requirements and machinery space definitions (now referenced in consolidated form).
- EU Directives on Lift Safety: EN 81-21 supports compliance with relevant EU safety and accessibility directives.
- Other Parts of EN 81 Series: Cover additional aspects such as maintenance, modernization, and escalators.
Keywords: EN 81-21, lift safety standard, passenger lifts, goods passenger lifts, existing building lifts, lift installation safety, lift modernization, European lift standards, EN 81-1, EN 81-2, lift safety verification, building retrofit lifts.
Frequently Asked Questions
EN 81-21:2009/FprA1 is a draft published by the European Committee for Standardization (CEN). Its full title is "Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 21: New passenger and goods passenger lifts in existing builiding". This standard covers: This European Standard specifies the safety rules related to new passenger and goods/passenger lifts permanently installed in existing buildings where in some circumstances due to limitations enforced by building constraints, some requirements of EN 81-1 and EN 81-2 cannot be met (see also 4th sentence of Introduction). This European Standard addresses a number of these constraints and gives requirements for alternative solutions. It shall be read and applied in conjunction with the European Standards EN 81-1 or EN 81-2 and their amendments A1:2005 and A2:2004, including their Clause 0. This European Standard covers: Either the construction and installation of one or more complete new lift(s) including new well and machinery spaces in an existing building; or The replacement of one or more existing lift(s) by new ones in existing well(s) and machinery spaces.This European Standard does not cover: Replacement or modifications of some parts to a lift already installed; Other applications outside of the scope of EN 81-1 or EN 81-2.This European Standard specifies the safety rules related to new passenger and goods/passenger lifts permanently installed in existing buildings where in some circumstances due to limitations enforced by building constraints, some requirements of EN 81-1 and EN 81-2 cannot be met (see also 4th sentence of Introduction). This European Standard addresses a number of these constraints and gives requirements for alternative solutions. It shall be read and applied in conjunction with the European Standards EN 81-1 or EN 81-2 and their amendments A1:2005 and A2:2004, including their Clause 0.This European Standard covers: Either the construction and installation of one or more complete new lift(s) including new well and machinery spaces in an existing building; or The replacement of one or more existing lift(s) by new ones in existing well(s) and machinery spaces. This European Standard does not cover: Replacement or modThis Europea
This European Standard specifies the safety rules related to new passenger and goods/passenger lifts permanently installed in existing buildings where in some circumstances due to limitations enforced by building constraints, some requirements of EN 81-1 and EN 81-2 cannot be met (see also 4th sentence of Introduction). This European Standard addresses a number of these constraints and gives requirements for alternative solutions. It shall be read and applied in conjunction with the European Standards EN 81-1 or EN 81-2 and their amendments A1:2005 and A2:2004, including their Clause 0. This European Standard covers: Either the construction and installation of one or more complete new lift(s) including new well and machinery spaces in an existing building; or The replacement of one or more existing lift(s) by new ones in existing well(s) and machinery spaces.This European Standard does not cover: Replacement or modifications of some parts to a lift already installed; Other applications outside of the scope of EN 81-1 or EN 81-2.This European Standard specifies the safety rules related to new passenger and goods/passenger lifts permanently installed in existing buildings where in some circumstances due to limitations enforced by building constraints, some requirements of EN 81-1 and EN 81-2 cannot be met (see also 4th sentence of Introduction). This European Standard addresses a number of these constraints and gives requirements for alternative solutions. It shall be read and applied in conjunction with the European Standards EN 81-1 or EN 81-2 and their amendments A1:2005 and A2:2004, including their Clause 0.This European Standard covers: Either the construction and installation of one or more complete new lift(s) including new well and machinery spaces in an existing building; or The replacement of one or more existing lift(s) by new ones in existing well(s) and machinery spaces. This European Standard does not cover: Replacement or modThis Europea
EN 81-21:2009/FprA1 is classified under the following ICS (International Classification for Standards) categories: 91.140.90 - Lifts. Escalators. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 81-21:2009/FprA1 has the following relationships with other standards: It is inter standard links to EN 81-21:2009+A1:2012, EN 81-21:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 81-21:2009/FprA1 is associated with the following European legislation: EU Directives/Regulations: 95/16/EC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 81-21:2009/FprA1 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2012
9DUQRVWQDSUDYLOD]DNRQVWUXLUDQMHLQYJUDGQMRGYLJDO OLIWRY 'YLJDOD]DSUHYR]
RVHELQEODJDGHO 1RYDRVHEQDLQWRYRUQRRVHEQDGYLJDODYREVWRMHþLK
VWDYEDK'RSROQLOR$
Safety rules for the construction and installation of lifts - Lifts for the transport of persons
and goods - Part 21: New passenger and goods passenger lifts in existing builiding
Sicherheitsregeln für die Konstruktion und den Einbau von Aufzügen - Aufzüge für den
Personen- und Gütertransport - Teil 21: Neue Personen- und Lastenaufzüge in
bestehenden Gebäuden
Règles de sécurité pour la construction et l'installation des élévateurs - Élévateurs pour
le transport de personnes et de charges - Partie 21 : Ascenseurs et ascenseurs de
charge neufs dans les bâtiments existants
Ta slovenski standard je istoveten z: EN 81-21:2009/FprA1
ICS:
91.140.90 'YLJDOD7HNRþHVWRSQLFH Lifts. Escalators
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 81-21:2009
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
March 2012
ICS 91.140.90
English Version
Safety rules for the construction and installation of lifts - Lifts for
the transport of persons and goods - Part 21: New passenger
and goods passenger lifts in existing builiding
Règles de sécurité pour la construction et l'installation des Sicherheitsregeln für die Konstruktion und den Einbau von
élévateurs - Élévateurs pour le transport de personnes et
Aufzügen - Aufzüge für den Personen- und Gütertransport -
de charges - Partie 21 : Ascenseurs et ascenseurs de Teil 21: Neue Personen- und Lastenaufzüge in
charge neufs dans les bâtiments existants bestehenden Gebäuden
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 10.
This draft amendment A1, if approved, will modify the European Standard EN 81-21:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 81-21:2009/FprA1:2012: E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Modification to Clause 2, Normative references .4
2 Modifications to Clause 5 Safety requirements and/or protective measures .4
3 Modifications to Clause 6, Verification of safety requirements and/or protective measures .6
4 Modifications to Clause 7, Information for use .6
5 Modifications to Annex B .6
6 Modifications to Annex C .7
Foreword
This document (EN 81-21:2009/FprA1:2012) has been prepared by Technical Committee CEN/TC 10 “Lifts,
escalators and moving walks”, the secretariat of which is held by AFNOR.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
1 Modification to Clause 2, Normative references
Replace
"EN 81-1:1998, Safety rules for the construction and installation of lifts — Part 1: Electric lifts
EN 81-1/A1:2005, Safety rules for the construction a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...