EN ISO 15084:2018
(Main)Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003)
Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003)
ISO 15084:2003 specifies requirements for strong points for attaching chains, cables and lines for anchoring, mooring and towing small craft. It does not specify the requirement for the strong point from which the craft can tow other vessels. This standard is applicable to small craft with a hull length up to 24 m.
ISO 15084:2003 does not define anchor weights or the length of chains and lines.
Kleine Wasserfahrzeuge - Ankern, Festmachen und Schleppen - Festpunkte (ISO 15084:2003)
Petits navires - Mouillage, amarrage et remorquage - Points d'ancrage (ISO 15084:2003)
L'ISO 15084:2003 spécifie des exigences relatives aux points d'ancrage des chaînes, câbles et lignes de mouillage, d'amarrage et de remorquage du bateau. Elle ne spécifie pas d'exigence relative au point d'ancrage destiné au remorquage d'autres bateaux. La présente Norme internationale est applicable aux bateaux ayant une longueur de coque inférieure ou égale à 24 m.
L'ISO 15084:2003 ne définit pas la masse des ancres ni la longueur des chaînes ou des lignes.
Mala plovila - Sidranje, privez in vleka - Poudarki (ISO 15084:2003)
Ta mednarodni standard določa zahteve glede fiksirnih točk za pritrjevanje verig, kablov in vrvi za sidranje, privez ter vleko malih plovil. Ne podaja zahtev za fiksirne točke, s pomočjo katere lahko plovilo vleče druga plovila. Ta standard se uporablja za mala plovila z dolžino trupa do 24 m.
Ta mednarodni standard ne določa teže sidra ali dolžine verige in vrvi.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 15084:2018
01-december-2018
1DGRPHãþD
SIST EN ISO 15084:2003
Mala plovila - Sidranje, privez in vleka - Poudarki (ISO 15084:2003)
Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003)
Kleine Wasserfahrzeuge - Ankern, Festmachen und Schleppen - Festpunkte (ISO
15084:2003)
Petits navires - Mouillage, amarrage et remorquage - Points d'ancrage (ISO 15084:2003)
Ta slovenski standard je istoveten z: EN ISO 15084:2018
ICS:
47.080 ýROQL Small craft
SIST EN ISO 15084:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 15084:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 15084:2018
EN ISO 15084
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2018
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 15084:2003
English Version
Small craft - Anchoring, mooring and towing - Strong
points (ISO 15084:2003)
Petits navires - Mouillage, amarrage et remorquage - Kleine Wasserfahrzeuge - Ankern, Festmachen und
Points d'ancrage (ISO 15084:2003) Schleppen - Festpunkte (ISO 15084:2003)
This European Standard was approved by CEN on 16 April 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15084:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 15084:2018
EN ISO 15084:2018 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered . 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 15084:2018
EN ISO 15084:2018 (E)
European foreword
The text of ISO 15084:2003 has been prepared by Technical Committee ISO/TC 188 “Small craft” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 15084:2018.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall be
withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15084:2003.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2013/53/EU.
For relationship with EU Directive 2013/53/EU, see informative Annex ZA, which is an integral part of
this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
the United Kingdom.
Endorsement notice
The text of ISO 15084:2003 has been approved by CEN as EN ISO 15084:2018 without any modification.
3
-----
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.