iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13814-3:2019/prA1

(Amendment)

Safety of amusement rides and amusement devices - Part 3: Requirements for inspection during design, manufacture, operation and use

Safety of amusement rides and amusement devices - Part 3: Requirements for inspection during design, manufacture, operation and use

This part of EN 13814 defines requirements for the necessary independent inspections of amusement devices designed, manufactured, operated and used according to EN 13814-1:2019 and EN 13814-2:2019.

Sicherheit von Fahrgeschäften und Vergnügungsanlagen - Teil 3: Anforderungen an die Überprüfung während Konstruktion, Bemessung, Herstellung, Betrieb und Gebrauch

Sécurité des manèges et des dispositifs de divertissement - Partie 3 : Exigences relatives à l'inspection pendant la conception, fabrication et fonctionnement

Varnost naprav in opreme v zabaviščnih parkih - 3. del: Zahteve za nadzor med načrtovanjem, izdelavo, delovanjem in uporabo

General Information

Status
Not Published
Publication Date
01-Dec-2024
ICS
97.200.40 - Playgrounds
Technical Committee
CEN/TC 152 - Fairground and amusement park machinery and structures - Safety
Drafting Committee
CEN/TC 152/WG 1 - Rides
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
07-Dec-2023
Due Date
06-Oct-2023
Completion Date
07-Dec-2023
Ref Project
SIST EN 13814-3:2019/oprA1:2023 - Safety of amusement rides and amusement devices - Part 3: Requirements for inspection during design, manufacture, operation and use

Relations

Amends
EN 13814-3:2019 - Safety of amusement rides and amusement devices - Part 3: Requirements for inspection during design, manufacture, operation and use
Effective Date
31-Aug-2022

Buy Standard

EN 13814-3:2019/oprA1:2023EN 13814-3:2019/oprA1:2023
PreviousNext
Draft
EN 13814-3:2019/oprA1:2023
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2023
Varnost naprav in opreme v zabaviščnih parkih - 3. del: Zahteve za nadzor med
načrtovanjem, izdelavo, delovanjem in uporabo
Safety of amusement rides and amusement devices - Part 3: Requirements for
inspection during design, manufacture, operation and use
Sicherheit von Fahrgeschäften und Vergnügungsanlagen - Teil 3: Anforderungen an die
Überprüfung während Konstruktion, Bemessung, Herstellung, Betrieb und Gebrauch
Sécurité des manèges et des dispositifs de divertissement - Partie 3 : Exigences
relatives à l'inspection pendant la conception, fabrication et fonctionnement
Ta slovenski standard je istoveten z: EN 13814-3:2019/prA1
ICS:
97.200.40 Igrišča Playgrounds
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 13814-3:2019
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
September 2023
ICS 97.200.40
English Version
Safety of amusement rides and amusement devices - Part
3: Requirements for inspection during design,
manufacture, operation and use
Sécurité des manèges et des dispositifs de Sicherheit von Fahrgeschäften und
divertissement - Partie 3 : Exigences relatives à Vergnügungsanlagen - Teil 3: Anforderungen an die
l'inspection pendant la conception, fabrication et Überprüfung während Konstruktion, Bemessung,
fonctionnement Herstellung, Betrieb und Gebrauch
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 152.

This draft amendment A1, if approved, will modify the European Standard EN 13814-3:2019. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Bel
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 18042:2024(Main)
Safety of amusement rides and amusement devices - Replies to requests for interpretation of EN 13814:2019 and its parts
SIST-TP CEN/TR 18042:2024

The purpose of this CEN Technical Report is to provide replies to requests for interpretations of all parts to EN 13814:2019.

  • Technical report
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13814-3:2019(Main)
Safety of amusement rides and amusement devices - Part 3: Requirements for inspection during design, manufacture, operation and use
SIST EN 13814-3:2019

This part of EN 13814 defines requirements for the necessary independent inspections of amusement devices designed, manufactured, operated and used according to EN 13814-1:2019 and EN 13814-2:2019.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13814-2:2019(Main)
Safety of amusement rides and amusement devices - Part 2: Operation, maintenance and use
SIST EN 13814-2:2019

This document specifies the minimum requirements necessary to ensure the safe maintenance, operation, inspection and testing of amusement ride and amusement devices which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations.
Grandstands, construction site installations, scaffolding, removable agricultural structures, simple coin operated children's amusement devices, carrying up to three children, and recreational devices like waterslides or summer toboggan runs, playground equipment, rope courses, climbing wall, inflatable, trampolines, swimming pool equipment (this list is not exhaustive) are not covered by this document.
In terms of workers’ health and safety, national regulations apply.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13814-1:2019(Main)
Safety of amusement rides and amusement devices - Part 1: Design and manufacture
SIST EN 13814-1:2019

This document specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, and installation of mobile, temporary or permanently installed machinery and structures which are intended for use by persons as a leisure activity, e.g. roundabouts, swings, boats, ferris wheels, roller coasters, chutes, booths, side shows, and structures for artistic aerial displays. The above items are hereafter called amusement devices, which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations. Grandstands, construction site installations, scaffolding, removable agricultural structures, simple coin operated children's amusement devices, carrying up to three children, and recreational devices like waterslides or summer toboggan runs, playground equipment, rope courses, climbing wall, inflatable, trampolines, swimming pool equipment (this list is not exhaustive) are not covered by this document.
For all the equipment not covered by the requirements of EN 13814-1, the relevant standards apply.
Nevertheless this document can be used in the design of any similar structural or passenger carrying amusement device not explicitly mentioned herein.
In terms of workers’ health and safety, national regulations apply.
This document is applicable to manufacturing and major modification of amusement devices and rides for designs after the effective date of publication.

  • Standard
    176 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13814-1:2019/prA1(Amendment)
Safety of amusement rides and amusement devices - Part 1: Design and manufacture
SIST EN 13814-1:2019/oprA1:2023

This document specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, and installation of mobile, temporary or permanently installed machinery and structures which are intended for use by persons as a leisure activity, e.g. roundabouts, swings, boats, ferris wheels, roller coasters, chutes, booths, side shows, and structures for artistic aerial displays. The above items are hereafter called amusement devices, which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations. Grandstands, construction site installations, scaffolding, removable agricultural structures, simple coin operated children's amusement devices, carrying up to three children, and recreational devices like waterslides or summer toboggan runs, playground equipment, rope courses, climbing wall, inflatable, trampolines, swimming pool equipment (this list is not exhaustive) are not covered by this document.
For all the equipment not covered by the requirements of EN 13814-1, the relevant standards apply.
Nevertheless this document can be used in the design of any similar structural or passenger carrying amusement device not explicitly mentioned herein.
In terms of workers’ health and safety, national regulations apply.
This document is applicable to manufacturing and major modification of amusement devices and rides for designs after the effective date of publication.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13814-2:2019/prA1(Amendment)
Safety of amusement rides and amusement devices - Part 2: Operation, maintenance and use
SIST EN 13814-2:2019/oprA1:2023

This document specifies the minimum requirements necessary to ensure the safe maintenance, operation, inspection and testing of amusement ride and amusement devices which are intended to be installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in fairgrounds and amusement parks or any other locations.
Grandstands, construction site installations, scaffolding, removable agricultural structures, simple coin operated children's amusement devices, carrying up to three children, and recreational devices like waterslides or summer toboggan runs, playground equipment, rope courses, climbing wall, inflatable, trampolines, swimming pool equipment (this list is not exhaustive) are not covered by this document.
In terms of workers’ health and safety, national regulations apply.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 18042:2024(Main)
Safety of amusement rides and amusement devices - Replies to requests for interpretation of EN 13814:2019 and its parts
SIST-TP CEN/TR 18042:2024

The purpose of this CEN Technical Report is to provide replies to requests for interpretations of all parts to EN 13814:2019.

  • Technical report
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1177:2018+A1:2023(Main)
Impact attenuating playground surfacing - Methods of test for determination of impact attenuation
SIST EN 1177:2018+A1:2024

This European Standard specifies the test apparatus and the impact test methods for determining the impact attenuation of surfacing by measuring the acceleration experienced during impact. Test apparatus in compliance with this standard are applicable to tests carried out in a laboratory or on site by either methods described.
NOTE   The test methods described in this standard are also applicable for impact areas required in other standards than for playground equipment, e.g. for outdoor fitness equipment and parkour equipment.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1176-1:2017+A1:2023(Main)
Playground equipment and surfacing - Part 1: General safety requirements and test methods
SIST EN 1176-1:2018+A1:2024

This part of EN 1176 specifies general safety requirements for permanently installed public playground equipment and surfacing. Additional safety requirements for specific pieces of playground equipment are specified in subsequent parts of this standard.
This part of EN 1176 covers playground equipment for all children. It has been prepared with full recognition of the need for supervision of young children and of less able or less competent children.
The purpose of this part of EN 1176 is to ensure a proper level of safety when playing in, on or around playground equipment, and at the same time to promote activities and features known to benefit children because they provide valuable experiences that will enable them to cope with situations outside the playground.
This part of EN 1176 is applicable to playground equipment intended for individual and collective use by children. It is also applicable to equipment and units installed as children's playground equipment although they are not manufactured as such, but exclude those items defined as toys in EN 71 and the Toys Safety Directive.
It is not applicable to adventure playgrounds with the exception of those items which have been commercially sourced.
NOTE   Adventure playgrounds are fenced, secured playgrounds, run and staffed in accordance with the widely accepted principles that encourage children's development and often use self-built equipment.
This part of EN 1176 specifies the requirements that will protect the child from hazards that they might be unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated.
The use of electricity in play equipment, either as a play activity or as a motive force, is outside the scope of this standard. The attention of users is drawn to European and local national standards and regulations which are to be complied with when using electricity.
Play equipment placed in water and where water can be seen as impact attenuating surfacing is not fully covered by this standard and additional risks are associated with wet environments.
The risk of exposure to excessive levels of UV radiation is not covered in this standard.

  • Standard
    102 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17994:2023(Main)
One post equipment - Inspection guidance
SIST-TP CEN/TR 17994:2024

The purpose of this document is to supplement the information on ‘One Post Equipment’ contained in EN 1176 1 and to share good practice for the implementation of the requirements in that standard.

  • Technical report
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day