EN 3434:2022
(Main)Aerospace series - Nuts, hexagon, slotted/castellated, self-locking, in steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C
Aerospace series - Nuts, hexagon, slotted/castellated, self-locking, in steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C
This standard specifies characteristics of self-locking hexagonal slotted/castellated nuts, in steel, cadmium plated, MoS2 lubricated, for aerospace applications.
Classification: 900 MPa /235 °C .
Luft- und Raumfahrt - Sechskant-Kronenmuttern, selbstsichernd, aus Stahl, verkadmet, MoS2-geschmiert - Klasse: 900 MPa (bei Raumtemperatur)/235 °C
Série aérospatiale - Écrous hexagonaux à créneaux, à freinage interne, en acier, cadmiés, lubrifiés au MoS2 - Classification : 900 MPa (à température ambiante)/235 °C
Le présent document spécifie les caractéristiques des écrous hexagonaux à créneaux, à freinage interne, en acier, cadmiés, lubrifiés au MoS2, pour les applications aérospatiales.
Classification : 900 MPa 1)/235 °C 2).
Aeronavtika - Matice, šestrobe, z zarezo/kronske, samozaporne, iz jekla, kadmirane, mazane z MoS2 - Klasifikacija: 900 MPa (pri okoljski temperaturi)/235 °C
Ta standard določa lastnosti samozapornih šestrobih matic, kronskih/z zarezo, iz jekla, kadmiranih, mazanih z MoS2 za uporabo v aeronavtiki.
Klasifikacija: 900 MPa/235 °C.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 3434:2023
01-marec-2023
Aeronavtika - Matice, šestrobe, z zarezo/kronske, samozaporne, iz jekla,
kadmirane, mazane z MoS2 - Klasifikacija: 900 MPa (pri okoljski temperaturi)/235
°C
Aerospace series - Nuts, hexagon, slotted/castellated, self-locking, in steel, cadmium
plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature)/235 °C
Luft- und Raumfahrt - Sechskant-Kronenmuttern, selbstsichernd, aus Stahl, verkadmet,
MoS2-geschmiert - Klasse: 900 MPa (bei Raumtemperatur)/235 °C
Série aérospatiale - Écrous hexagonaux à créneaux, à freinage interne, en acier,
cadmiés, lubrifiés au MoS2 - Classification : 900 MPa (à température ambiante)/235 °C
Ta slovenski standard je istoveten z: EN 3434:2022
ICS:
49.025.10 Jekla Steels
49.030.30 Matice Nuts
SIST EN 3434:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 3434:2023
---------------------- Page: 2 ----------------------
SIST EN 3434:2023
EN 3434
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 49.030.30
English Version
Aerospace series - Nuts, hexagon, slotted/castellated, self-
locking, in steel, cadmium plated, MoS2 lubricated -
Classification: 900 MPa (at ambient temperature)/235 °C
Série aérospatiale - Écrous hexagonaux à créneaux, à Luft- und Raumfahrt - Sechskant-Kronenmuttern,
freinage interne, en acier, cadmiés, lubrifiés au MoS2 - selbstsichernd, aus Stahl, verkadmet, MoS2-geschmiert
Classification : 900 MPa (à température ambiante)/235 - Klasse: 900 MPa (bei Raumtemperatur)/235 °C
°C
This European Standard was approved by CEN on 26 March 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3434:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3434:2023
EN 3434:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
4.1 Configuration — Dimensions — Masses . 5
4.2 Tolerances of form and position . 7
4.3 Materials . 7
4.4 Surface treatments . 7
5 Designation . 7
6 Marking .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.