EN ISO/IEC 30121:2016

SLOVENSKI STANDARD
01-november-2016
Informacijska tehnologija - Okvir za upravljanje tveganja digitalne forenzike
(ISO/IEC 30121:2015)
Information technology - Governance of digital forensic risk framework (ISO/IEC
30121:2015)
Informationstechnik - Leitfaden für die Betriebsführung digitaler Forensik (ISO/IEC
30121:2015)
Technologies de l'information - Gouvernance du cadre de risque forensique numérique
(ISO/IEC 30121:2015)
Ta slovenski standard je istoveten z: EN ISO/IEC 30121:2016
ICS:
07.140 Forenzika Forensic science
35.240.99 8SRUDEQLãNHUHãLWYH,7QD IT applications in other fields
GUXJLKSRGURþMLK
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO/IEC 30121
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2016
EUROPÄISCHE NORM
ICS 35.080
English Version
Information technology - Governance of digital forensic
risk framework (ISO/IEC 30121:2015)
Technologies de l'information - Gouvernance du cadre Informationstechnik - Leitfaden für die
de risque forensique numérique (ISO/IEC 30121:2015) Betriebsführung digitaler Forensik (ISO/IEC
30121:2015)
This European Standard was approved by CEN on 19 June 2016.

CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions
for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN and CENELEC members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN and CENELEC All rights of exploitation in any form and by any means Ref. No. EN ISO/IEC 30121:2016 E
reserved worldwide for CEN and CENELEC national
Members.
Contents Page
European foreword . 3

European foreword
The text of ISO/IEC 30121:2015 has been prepared by Technical Committee ISO/IEC JTC 1 “Information
technology” of the International Organization for Standardization (ISO) and the International
Electrotechnical Commission (IEC) and has been taken over as EN ISO/IEC 30121:2016.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2017, and conflicting national standards
shall be withdrawn at the latest by February 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO/IEC 30121:2015 has been approved by CEN as EN ISO/IEC 30121:2016 without any
modification.
INTERNATIONAL ISO/IEC
STANDARD 30121
First edition
2015-03-15
Information technology — Governance
of digital forensic risk framework
Technologies de l’information — Gouvernance du cadre de risque
forensique numérique
Reference number
ISO/IEC 30121:2015(E)
©
ISO/IEC 2015
ISO/IEC 30121:2015(E)
© ISO/IEC 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2015 – All rights reserved

ISO/IEC 30121:2015(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principles . 2
4.1 Responsibility . 2
4.2 Strategy . 2
4.3 Acquisition . 2
4.4 Performance . 2
4.5 Conformance . 2
4.6 Human behaviour . 2
5 The framework . 2
5.1 Stakeholder mandate. 2
5.2 Establishment . 2
5.3 Evaluate . 2
5.4 Direct . 3
5.5 Monitor . 3
6 Processes . 3
6.1 Archival strategy . 3
6.2 Discovery strategy . 3
6.3 Disclosure strategy . 3
6.4 Digital forensic capability strategy . 3
6.5 Risk compliance strategy . 3
7 Metrics . 4
7.1 General . 4
7.2 Key goal indicators . 4
7.3 Key performance indicators . 4
7.4 Key business indicators . 4
Annex A (informative) International Standard overview . 5
Bibliography . 6
© ISO/IEC 2015 – All rights reserved iii

ISO/IEC 30121:2015(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
Details of any patent rights identified during the development of the document will be in the Introduction
and/or on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT), see the following URL: Foreword — Supplementary information.
The committee responsible for this document is ISO/IEC JTC 1, Information technology, Subcommittee SC
40, IT Service Management and IT Governance.
iv © ISO/IEC 2015 – All rights reserved

S
...