EN 1124-2:1999
(Main)Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; Dimensions
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; Dimensions
This standard applies to pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. It specifies dimensions and tolerances for pipes, fittings and pipe connectors and establishes a system of designations for the different pipe and fitting types that conform to the stated requirements. This standard is only valid in connection with prEN 1124-1. This standard does not apply to the marking of products. prEN 1124-1 applies to the marking.
Rohre und Formstücke aus längsnahtgeschweißtem, nichtrostendem Stahlrohr mit Steckmuffe für Abwasserleitungen - Teil 2: System S; Maße
Diese Norm gilt für Rohre und Formstücke aus längsnahtgeschweißtem, nichtrostendem Stahlrohr mit Steckmuffe für Abwasserleitungen. Sie legt Maße und Grenzabmaße für Rohre, Formstücke und Rohrverbindungen fest und enthält zur einfachen Identifizierung jedes Bauteils ein System für die Bezeichnung der verschiedenen Arten von Rohren und Formstücken, die mit den getroffenen Anforderungen übereinstimmen. Diese Norm gilt nur in Verbindung mit prEN 1124-1. Diese Norm gilt nicht für die Kennzeichnung der Produkte. Hierfür gilt prEN 1124-1.
Tubes et raccords de tube soudés longitudinalement en acier inoxydable, à manchon enfichable pour réseaux d'assainissement - Partie 2: Système S; Dimensions
La présente norme s'applique aux tubes et raccords à manchon enfichable en acier inoxydable soudés longitudinalement pour canalisations d'eaux résiduaires. Elle indique les dimensions et tolérances pour tubes, raccords et manchons et contient, pour l'identification simple de chaque élément de construction, un système pour la désignation des types différents de tubes et raccords qui correspondent aux exigences déterminées. La présente norme n'est valable qu'en liaison avec le prEN 1124-1. Cette norme ne s'applique pas au marquage de produits. A cela s'applique le prEN 1124-1.
Vzdolžno varjene nerjavne jeklene cevi in spojniki z obojko za sisteme za odpadno vodo - 2. del: Sistem S - Mere
General Information
- Status
- Withdrawn
- Publication Date
- 19-Jan-1999
- Withdrawal Date
- 13-Nov-2007
- Technical Committee
- CEN/TC 165 - Waste water engineering
- Drafting Committee
- CEN/TC 165/WG 7 - Steel pipes
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 14-Nov-2007
- Completion Date
- 14-Nov-2007
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Institut za varilstvo d.o.o. (Welding Institute)
Slovenia's leading welding institute since 1952. ISO 3834, EN 1090, pressure equipment certification, NDT personnel, welder qualification. Only IIW Au
Sponsored listings
Frequently Asked Questions
EN 1124-2:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; Dimensions". This standard covers: This standard applies to pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. It specifies dimensions and tolerances for pipes, fittings and pipe connectors and establishes a system of designations for the different pipe and fitting types that conform to the stated requirements. This standard is only valid in connection with prEN 1124-1. This standard does not apply to the marking of products. prEN 1124-1 applies to the marking.
This standard applies to pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems. It specifies dimensions and tolerances for pipes, fittings and pipe connectors and establishes a system of designations for the different pipe and fitting types that conform to the stated requirements. This standard is only valid in connection with prEN 1124-1. This standard does not apply to the marking of products. prEN 1124-1 applies to the marking.
EN 1124-2:1999 is classified under the following ICS (International Classification for Standards) categories: 23.040.05 - Pipeline and its parts for external sewage systems; 23.040.10 - Iron and steel pipes; 23.040.40 - Metal fittings; 23.040.60 - Flanges, couplings and joints. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1124-2:1999 has the following relationships with other standards: It is inter standard links to EN 1124-2:2007; is excused to EN 1124-1:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1124-2:1999 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1124-2:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vzdolžno varjene nerjavne jeklene cevi in spojniki z obojko za sisteme za odpadno vodo - 2. del: Sistem S - MereRohre und Formstücke aus längsnahtgeschweißtem, nichtrostendem Stahlrohr mit Steckmuffe für Abwasserleitungen - Teil 2: System S; MaßeTubes et raccords de tube soudés longitudinalement en acier inoxydable, a manchon enfichable pour réseaux d'assainissement - Partie 2: Systeme S; DimensionsPipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; Dimensions93.030Zunanj
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...