EN 14906:2012
(Main)Leather - Leather for automotive - Test methods and testing parameters
Leather - Leather for automotive - Test methods and testing parameters
This European Standard gives guidelines to select the test methods to assess the performance of leather for automotive. This document also specifies the sampling and conditioning procedures of specimens.
NOTE Regulations on chemical substances in consumer goods may differ from country to country requiring for any given market a special attention to restricted substances.
Leder - Automobilleder - Prüfverfahren und Prüfparameter
Dieses Dokument gibt Richtlinien für die Auswahl der Prüfverfahren vor, um die Leistung von Leder in Kraft-fahrzeugen zu bewerten. Dieses Dokument legt die Verfahren für Probenahme und Konditionierung der Proben fest.
ANMERKUNG Bestimmungen zu chemischen Substanzen in Konsumgütern können von Land zu Land unterschiedlich sein und erfordern für einen bestimmten Markt eine besondere Berücksichtigung verbotener Substanzen.
Cuir - Cuir pour l'automobile - Méthodes d'essai
La présente Norme européenne fournit des lignes directrices pour le choix des méthodes d’essai permettant d’évaluer les performances du cuir destiné à l’industrie automobile. Elle spécifie également les modes opératoires d’échantillonnage et de conditionnement des échantillons.
NOTE Les réglementations sur les substances chimiques présentes dans les biens de consommation sont susceptibles de différer d’un pays à l’autre et nécessiter, pour un marché donné, une attention particulière par rapport à certaines substances faisant l’objet de restrictions.
Usnje - Usnje za uporabo v avtomobilih - Preskusni postopki in parametri
Ta evropski standard določa smernice za izbiro preskusnih postopkov za oceno lastnosti usnja za uporabo v avtomobilih. Ta dokument določa tudi postopke vzorčenja in kondicioniranja vzorcev.
General Information
- Status
- Published
- Publication Date
- 22-May-2012
- Withdrawal Date
- 29-Nov-2012
- Technical Committee
- CEN/TC 289 - Leather
- Current Stage
- 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
- Start Date
- 28-Mar-2024
- Completion Date
- 14-Apr-2025
Relations
- Effective Date
- 30-May-2012
- Effective Date
- 08-Apr-2024
Overview
EN 14906:2012 provides a harmonised framework for selecting test methods to assess the performance of leather for automotive applications. Published by CEN, the standard covers sampling location and quantity, specimen conditioning and preparation, and defines a comprehensive list of test methods appropriate for automotive upholstery and trim (e.g., seats, headrests, armrests, dashboards, steering wheels, gear knobs).
This standard is intended to be used by leather producers, automotive manufacturers, testing laboratories and procurement teams to establish clear, reproducible specifications for material performance and to support commercial negotiations.
Key benefits: consistent test selection, comparable reports, improved product acceptance and easier regulatory alignment for different markets.
Key Topics
- Scope and purpose: Guidelines to select test methods for assessing automotive leather performance and for defining sampling and conditioning procedures.
- Sampling: Laboratory samples shall be located and identified in accordance with EN ISO 2418; sample numbers follow ISO 2588 unless otherwise agreed.
- Conditioning and sample preparation: Physical, mechanical and fastness tests follow EN ISO 2419; chemical tests follow EN ISO 4044.
- Fundamental properties (selected):
- Apparent density and mass per unit area (EN ISO 2420)
- Thickness and surface coating thickness (EN ISO 2589, EN ISO 17186)
- Tensile strength, elongation, tear load and stitch tear resistance (EN ISO 3376, EN ISO 3377-1, EN ISO 23910)
- Adhesion of finish (EN ISO 11644)
- Bending stiffness and flex resistance (EN ISO 14087, EN ISO 5402-1)
- Abrasion resistance and ageing/heat performance (EN ISO 17076-2, EN ISO 17228, EN ISO 17227)
- Colour fastness to light and rubbing (EN ISO 105-B06, EN ISO 11640)
- Complementary properties: water vapour permeability, air permeability (for perforated leather), migration, resistance to insect repellents and soiling/cleanability.
- Emissions and odour: The standard references EN ISO 17071 for fogging and EN ISO 17226-3 for formaldehyde emissions. For VOC and odour evaluation, commonly used VDA methods (e.g., VDA 277, 278, 270) are referenced where EN/ISO methods are not available.
Applications
- Specifying performance requirements in supplier contracts and tender documents
- Defining laboratory test programs for incoming inspection and quality control
- Supporting design reviews for automotive interiors where durability, fastness and emissions are critical
- Assisting regulatory and market-specific checks for restricted substances in consumer goods
Related Standards
- EN ISO 2418 - Sampling location
- EN ISO 2419 - Sample preparation and conditioning
- EN ISO 3376 / 3377 / 11640 / 17228 - Core leather test methods
- VDA 270 / 277 / 278 - Industry methods for odour and VOCs (referenced for markets where no EN/ISO method exists)
Test reports produced under EN 14906:2012 should include the information required by the referenced test methods and any additional evaluation requested in specifications. Use the standard as a basis for clear, reproducible laboratory testing and objective supplier acceptance criteria.
Frequently Asked Questions
EN 14906:2012 is a standard published by the European Committee for Standardization (CEN). Its full title is "Leather - Leather for automotive - Test methods and testing parameters". This standard covers: This European Standard gives guidelines to select the test methods to assess the performance of leather for automotive. This document also specifies the sampling and conditioning procedures of specimens. NOTE Regulations on chemical substances in consumer goods may differ from country to country requiring for any given market a special attention to restricted substances.
This European Standard gives guidelines to select the test methods to assess the performance of leather for automotive. This document also specifies the sampling and conditioning procedures of specimens. NOTE Regulations on chemical substances in consumer goods may differ from country to country requiring for any given market a special attention to restricted substances.
EN 14906:2012 is classified under the following ICS (International Classification for Standards) categories: 59.140.30 - Leather and furs. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 14906:2012 has the following relationships with other standards: It is inter standard links to CEN/TS 14906:2004, FprEN 14906. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 14906:2012 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Usnje - Usnje za uporabo v avtomobilih - Preskusni postopki in parametriLeder - Automobilleder - Prüfverfahren und PrüfparameterCuir - Cuir pour l'automobile - Méthodes d'essaiLeather - Leather for automotive - Test methods and testing parameters59.140.30Usnje in krznoLeather and furs43.020Cestna vozila na splošnoRoad vehicles in generalICS:Ta slovenski standard je istoveten z:EN 14906:2012SIST EN 14906:2012en,de01-julij-2012SIST EN 14906:2012SLOVENSKI
STANDARDSIST-TS CEN/TS 14906:20051DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14906
May 2012 ICS 59.140.30 Supersedes CEN/TS 14906:2004English Version
Leather - Leather for automotive - Test methods and testing parameters
Cuir - Cuir pour l'automobile - Méthodes d'essai
Leder - Automobilleder - Prüfverfahren und PrüfparameterThis European Standard was approved by CEN on 27 April 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14906:2012: ESIST EN 14906:2012
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...