EN ISO 14906:2011/A1:2015

SLOVENSKI STANDARD
01-december-2015
Elektronsko pobiranje pristojbin - Definicija aplikacijskega vmesnika za posebne
komunikacije kratkega dosega (ISO 14906:2011/Amd 1:2015)
Electronic fee collection - Application interface definition for dedicated short-range
communication (ISO 14906:2011/Amd 1:2015)
Elektronische Gebührenerhebung - Anwendungsschnittstelle zur dezidierten Nahbereich-
Kommunikation (ISO 14906:2011/Amd 1:2015)
Perception du télépéage - Définition de l'interface d'application relative aux
communications dédiées à courte portée (ISO 14906:2011/Amd 1:2015)
Ta slovenski standard je istoveten z: EN ISO 14906:2011/A1:2015
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 14906:2011/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2015
ICS 03.220.20; 35.240.60
English Version
Electronic fee collection - Application interface definition for
dedicated short-range communication - Amendment 1 (ISO
14906:2011/Amd 1:2015)
Perception du télépéage - Définition de l'interface Elektronische Gebührenerhebung -
d'application relative aux communications dédiées à courte Anwendungsschnittstelle zur dezidierten Nahbereich-
portée - Amendement 1 (ISO 14906:2011/Amd 1:2015) Kommunikation - Änderung 1 (ISO 14906:2011/Amd
1:2015)
This amendment A1 modifies the European Standard EN ISO 14906:2011; it was approved by CEN on 23 April 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14906:2011/A1:2015 E
worldwide for CEN national Members.

Contents
Page
European foreword .3

European foreword
This document (EN ISO 14906:2011/A1:2015) has been prepared by Technical Committee
ISO/TC 204 “Intelligent transport systems” in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
This Amendment to the European Standard EN ISO 14906:2011 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by January 2016, and
conflicting national standards shall be withdrawn at the latest by January 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14906:2011/Amd 1:2015 has been approved by CEN as EN ISO 14906:2011/A1:2015 without
any modification.
INTERNATIONAL ISO
STANDARD 14906
Second edition
2011-10-15
AMENDMENT 1
2015-07-01
Electronic fee collection — Application
interface definition for dedicated
short-range communication
AMENDMENT 1
Perception du télépéage — Définition de l’interface d’application
relative aux communications dédiées à courte portée
AMENDEMENT 1
Reference number
ISO 14906:2011/Amd.1:2015(E)
©
ISO 2015
ISO 14906:2011/Amd.1:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

ISO 14906:2011/Amd.1:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 204, Intelligent transport systems.
ISO 14906:2011/Amd.1:2015(E)
Electronic fee collection — Application interface definition
for dedicated short-range communication
AMENDMENT 1
1   Amendment to Clause 3.2, action
Page 2, Clause 3.2, delete the clause.
2   Amendment to Clause 3.11, element
Page 3, Clause 3.11, replace:
element
with
Element
3   Amendment to Clause 6.2.3, ContextVersion
Page 14, Clause 6.2.3, replace:
EFC-ContextMark:: = SEQUENCE{
ContractProvider            Provider,
TypeOfContract             OCTET STRING (SIZE(2)),
ContextVersion              INTEGER(0.127,.)
}
with
EFC-ContextMark:: = SEQUENCE{
ContractProvider            Provider,
TypeOfContract             OCTET STRING (SIZE(2)),
ContextVersion             INTEGER(0.127,.)
}
The extensibility of the ContextVersion should not be used. ContextVersion is coded as a single octet.
4   Amendment to Clause 8.1, General
Page 35, Clause 8.1, replace:
Table 36 — EFC Attributes
AttributeID Attribute Length in Octet Data Group
0 EFC-ContextMark 6 Contract
1 ContractSerialNumber 4
2 ContractValidity 6
ISO 14906:2011/Amd.1:2015(E)
Table 36 (continued)
AttributeID Attribute Length in Octet Data Group
35 ValidityOfContract 4
3 ContractVehicle Variable
4 ContractAuthenticator Variable
5 ReceiptServicePart 13 Receipt
6 SessionClass 2
7 ReceiptServiceSerialNumber 3
36 ReceiptFinancialPart 23
9 ReceiptContract 9
10 ReceiptOBUId Variable
11 ReceiptICC-Id Variable
12 ReceiptText Variable
13 ReceiptAuthenticator Variable
14 ReceiptDistance 3
33 ReceiptData1 28
34 ReceiptData2 28
15 VehicleIdentificationNumber Variable Vehicle
16 VehicleLicencePlateNumber Variable
17 VehicleClass 1
18 VehicleDimensions 3
19 VehicleAxles 2
20 VehicleWeightLimits 6
21 VehicleWeightLaden 2
22 VehicleSpecificCharacteristics 4
23 VehicleAuthenticator Variable
37 AxleWeightLimits 10
38 PassengerCapacity 2
39 Engine 4
40 SoundLevel 2
41 ExhaustEmissionValues 8
42 DieselEmissionValues 4
43 CO2EmissionValue 2
44 VehicleTotalDistance 4
45 TrailerLicencePlateNumber Variable
46 TrailerCharacteristics 5
24 EquipmentOBUId Variable Equipment
25 EquipmentICC-Id Variable
26 EquipmentStatus 2
27 DriverCharacteristics 2 Driver
47 ActualNumberOfPassengers 1
2 © ISO 2015 – All rights reserved

ISO 14906:2011/Amd.1:2015(E)
Table 36 (continued)
AttributeID Attribute Length in Octet Data Group
32 PaymentMeans 14 Payment
29 PaymentMeansBalance 3
30 PaymentMeansUnit 2
31 PaymentSecurityData Variable
48–53 ReservedForCCC
54 ReservedForLAC
55–86 ReservedForFutureCENuse
87–127 ReservedForPrivateUse
with
Table 36 — EFC Attributes
AttributeID Attribute Length in Octet Data Group
0 EFC-ContextMark 6 Contract
1 ContractSerialNumber 4
2 ContractValidity 6
35 ValidityOfContract 4
3 ContractVehicle Variable
4 ContractAuthenticator Variable
5 ReceiptServicePart 13 Receipt
6 SessionClass 2
7 ReceiptServiceSerialNumber 3
36 ReceiptFinancialPart 23
9 ReceiptContract 9
10 ReceiptOBUId Variable
11 ReceiptICC-Id Variable
12 ReceiptText Variable
13 ReceiptAuthenticator Variable
14 ReceiptDistance 3
33 ReceiptData1 28
34 ReceiptData2 28
15 VehicleIdentificationNumber Variable Vehicle
16 VehicleLicencePlateNumber Variable
17 VehicleClass 1
18 VehicleDimensions 3
19 VehicleAxles 2
20 VehicleWeightLimits 6
21 VehicleWeightLaden 2
22 VehicleSpecificCharacteristics 4
23 VehicleAuthenticator Variable
37 AxleWeightLimits 10
ISO 14906:2011/Amd.1:2015(E)
Table 36 (continued)
AttributeID Attribute Length in Octet Data Group
38 PassengerCapacity 2
39 Engine 4
40 SoundLevel 2
41 ExhaustEmissionValues 8
42 DieselEmissionValues 4
43 CO2EmissionValue 2
44 VehicleTotalDistance 4
45 TrailerLicencePlateNumber Variable
46 TrailerCharacteristics 5
55 VehicleCurrentMaxTrainWeight 2
24 EquipmentOBUId Variable Equipment
25 EquipmentICC-Id Variable
26 EquipmentStatus 2
27 DriverCharacteristics 2 Driver
47 ActualNumberOfPassengers 1
32 PaymentMeans 14 Payment
29 PaymentMeansBalance 3
30 PaymentMeansUnit 2
31 PaymentSecurityData Variable
48–53 ReservedForCCC
54 ReservedForLAC
56–86 ReservedForFutureCENuse
87–127 ReservedForPrivateUse
5   Amendment to Table 39 — Data group Vehicle
Page 44, Table 39, replace Table 39 with the following:
4 © ISO 2015 – All rights reserved

ISO 14906:2011/Amd.1:2015(E)
Table 39 — Data group Vehicle
EFC Attribute Data element Definition Type Length Value Informative remarks
in octet Range
VehicleLicence VehicleLicence Claimed licence plate of the vehicle LPN Variable
PlateNumber PlateNumber
VehicleIdentifica- VehicleIdentification Identification number of vehicle according CS5 Variable Imported from ISO 14816
tionNumber ISO 3779
Number
VehicleClass VehicleClass Service provider specific information pertaining INT1 1
to the vehicle.
VehicleDimensions VehicleLengthOverall Nominal maximum overall length of the vehicle INT1 1
according to ISO 612, in dm, rounded to the next
dm.
VehicleHeightOverall Nominal overall unladen height, according to INT1 1
ISO 612, in dm, rounded to the next dm.
VehicleWidthOverall Nominal overall width, according to ISO 612, in INT1 1
dm, rounded to the next dm
VehicleAxles VehicleFirstAxle
- Bonnet height, measured over the front axle, in INT1 1
Height dm, rounded to the next dm.
VehicleAxlesNumber Tyre type and number of axles, including drop VehicleAxles 1 2 bits for dual tyre.
axles.
6 bits are used for the definit
...