EN 1097-7:1999
(Main)Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
This Part of this European Standard specifies the procedure for determining the particle density of filler by means of a pyknometer. The test procedure applies to natural and artificial fillers used in concrete and road construction. It is a general method, which may be used on materials which are not currently considered to be fillers in every country. The particle density of filler is used to convert volume percentages into mass percentages for concrete and asphalt mixture calculations. Furthermore it is applied to calculate the percentage of voids in filler (see prEN 1097-4).
Prüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 7: Bestimmung der Dichte von Füller - Pyknometer-Verfahren
Diese Europäische Norm legt das Prüfverfahren zur Bestimmung der Dichte von Füllern mit dem Pyknometer fest.
Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 7: Détermination de la masse volumique réelle du filler - Méthode au pycnomètre
La présente norme européenne spécifie le mode opératoire permettant de déterminer la masse volumique réelle du filler au moyen d'un pycnomètre.
Preskusi mehanskih in fizikalnih lastnosti agregatov - 7. del: Določevanje prostorninske mase zrn kamene moke - Postopek s piknometrom
General Information
- Status
- Withdrawn
- Publication Date
- 20-Jul-1999
- Withdrawal Date
- 11-Mar-2008
- Technical Committee
- CEN/TC 154 - Aggregates
- Drafting Committee
- CEN/TC 154/SC 6 - Test methods
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 12-Mar-2008
- Completion Date
- 12-Mar-2008
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Building products evaluation and certification.
QAI Laboratories
Building and construction product testing and certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 1097-7:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method". This standard covers: This Part of this European Standard specifies the procedure for determining the particle density of filler by means of a pyknometer. The test procedure applies to natural and artificial fillers used in concrete and road construction. It is a general method, which may be used on materials which are not currently considered to be fillers in every country. The particle density of filler is used to convert volume percentages into mass percentages for concrete and asphalt mixture calculations. Furthermore it is applied to calculate the percentage of voids in filler (see prEN 1097-4).
This Part of this European Standard specifies the procedure for determining the particle density of filler by means of a pyknometer. The test procedure applies to natural and artificial fillers used in concrete and road construction. It is a general method, which may be used on materials which are not currently considered to be fillers in every country. The particle density of filler is used to convert volume percentages into mass percentages for concrete and asphalt mixture calculations. Furthermore it is applied to calculate the percentage of voids in filler (see prEN 1097-4).
EN 1097-7:1999 is classified under the following ICS (International Classification for Standards) categories: 91.100.15 - Mineral materials and products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1097-7:1999 has the following relationships with other standards: It is inter standard links to EN 1097-7:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1097-7:1999 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1097-7:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2000
3UHVNXVLPHKDQVNLKLQIL]LNDOQLKODVWQRVWLDJUHJDWRYGHO 'RORþHYDQMH
SURVWRUQLQVNHPDVH]UQNDPHQHPRNH3RVWRSHNVSLNQRPHWURP
Tests for mechanical and physical properties of aggregates - Part 7: Determination of the
particle density of filler - Pyknometer method
Prüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen
- Teil 7: Bestimmung der Dichte von Füller - Pyknometer-Verfahren
Essais pour déterminer les caractéristiques mécaniques et physiques des granulats -
Partie 7: Détermination de la masse volumique réelle du filler - Méthode au pycnometre
Ta slovenski standard je istoveten z: EN 1097-7:1999
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
----------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...