Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General

This standard specifies the general requirements for the methods of testing elements of electrical, optical and data transmission system connections used in aerospace applications.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 100: Allgemeines

Diese Norm legt die allgemeinen Anforderungen an Prüfverfahren für elektrische und optische Verbindungselemente und Verbindungselemente von Datenübertragungssystemen zur Verwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 100 : Généralités

Aeronavtika – Elementi električnih in optičnih povezav – Preskusne metode – 100. del: Splošno

General Information

Status
Withdrawn
Publication Date
25-Oct-2005
Withdrawal Date
14-Aug-2018
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
15-Aug-2018

Relations

Buy Standard

Standard
EN 2591-100:2006
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: GeneralSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 100 : GénéralitésLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 100: AllgemeinesTa slovenski standard je istoveten z:EN 2591-100:2005SIST EN 2591-100:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 2591-100:200601-julij-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-100October 2005ICS 49.060 English VersionAerospace series - Elements of electrical and optical connection- Test methods - Part 100: GeneralSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 100 : GénéralitésLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 100:AllgemeinesThis European Standard was approved by CEN on 19 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-100:2005: E

EN 2234, Aerospace series – Cables, electrical, fire-resistant – Technical specification. 1) EN 2346, Aerospace series – Fire resistant electrical cables – Dimensions, conductor resistance and mass. 1) EN 2591*, Aerospace series – Elements of electrical and optical connection – Test methods. EN 3745-201, Aerospace series – Fibres and cables, optical, aircraft use – Test methods – Part 201: Visual examination.
EN 60512-1, Connectors for electronic equipment – Tests and measurements – Part 1: General (IEC 60512-1:2001) TR 4257, Aerospace series – Elements of electrical and optical connection – Relationship between the numbering systems for parts of EN 2591. 2) IEC 60050-581, International Electrotechnical Vocabulary – Chapter 581: Electromechanical components for electronic equipment. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. See IEC 60050-581 and EN 60512-1. 3.1 element of electrical or optical connection 3) component such as connector, module, etc., the purpose of which is to ensure the connection of circuits 3.2 flight cover (or protective cover) accessory designed to ensure, in flight, mechanical protection and sealing of front face of a non coupled connector
1) Published as AECMA Prestandard at the date of publication of this standard. 2) Published as AECMA Technical Report at the date of publication of this standard. 3) In test standards the term "element of connection" shall be used.

R = 0,5 µm max. Figure 1
4) Cracks made by a cleaving tool are acceptable if
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.