EN 13880-5:2024

SLOVENSKI STANDARD
01-junij-2024
Nadomešča:
SIST EN 13880-5:2005
Toplo nanosljive tesnilne mase za stike - 5. del: Preskusna metoda za ugotavljanje
pretočnega upora
Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
Heiß verarbeitbare Fugenmassen - Teil 5: Prüfverfahren zur Bestimmung der Fließlänge
Produits d'étanchéité pour joints appliqués à chaud - Partie 5 : Méthode d'essai pour la
détermination de la résistance à l'écoulement
Ta slovenski standard je istoveten z: EN 13880-5:2024
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 13880-5
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 13880-5:2004
English Version
Hot applied joint sealants - Part 5: Test method for the
determination of flow resistance
Produits d'étanchéité pour joints appliqués à chaud - Heiß verarbeitbare Fugenmassen - Teil 5:
Partie 5 : Méthode d'essai pour la détermination de la Prüfverfahren zur Bestimmung der Fließlänge
résistance à l'écoulement
This European Standard was approved by CEN on 4 January 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13880-5:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Term and definition . 5
4 Principle . 5
5 Apparatus . 5
6 Preparation and conditioning of the test specimens . 7
7 Test conditions . 8
8 Procedure. 8
9 Expression of results . 8
10 Precision . 8
11 Test report . 9
Bibliography . 10
European foreword
This document (EN 13880-5:2024) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards shall
be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13880-5:2004.
The main changes compared to the previous edition are listed below:
— normative references have been updated;
— scope, definition and principle have been clarified;
— preparation and conditioning actions have been better specified;
— procedure has been redrafted for better description.
This document is one of a series of standards as listed below:
EN 13880-1, Hot applied joint sealants — Part 1: Test method for the determination of density at 25 °C
EN 13880-2, Hot applied joint sealants — Part 2: Test method for the determination of cone penetration at
25 °C
EN 13880-3, Hot applied joint sealants — Part 3: Test method for the determination of penetration and
recovery (resilience)
EN 13880-4, Hot applied joint sealants — Part 4: Test method for the determination of heat resistance —
Change in penetration value
EN 13880-5, Hot applied joint sealants — Part 5: Test method for the determination of flow resistance
EN 13880-6, Hot applied joint sealants — Part 6: Test method for the preparation of samples for testing
EN 13880-7, Hot applied joint sealants — Part 7: Function testing of joint sealants
EN 13880-8, Hot applied joint sealants — Part 8: Test method for the determination of the change in weight
of fuel resistance joint sealants after fuel immersion
EN 13880-9, Hot applied joint sealants — Part 9: Test method for the determination of compatibility with
asphalt pavements
EN 13880-10, Hot applied joint sealants — Part 10: Test method for the determination of adhesion and
cohesion following continuous extension and compression
EN 13880-11, Hot applied joint sealants — Part 11: Test method for the preparation of asphalt test blocks
used in the function test and for the determination of compatibility with asphalt pavements
EN 13880-12, Hot applied joint sealants — Part 12: Test method for the manufacture of concrete test blocks
for testing (recipe methods)
EN 13880-13, Hot applied joint sealants — Part 13: Test method for the determination of the discontinuous
extension (adherence test)
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Stan
...