EN 13631-5:2002
(Main)Explosives for civil uses - High explosives - Part 5: Determination of resistance to water
Explosives for civil uses - High explosives - Part 5: Determination of resistance to water
This European Standard specifies a method of determining the resistance to water of cartridged or bulk high explosives for civil uses, which are designed to be used for blasting operations in wet conditions.
Explosivstoffe für zivile Zwecke - Sprengstoffe - Teil 5: Bestimmung der Wasserfestigkeit
Installation solaires thermiques et leur composants - Installations préfabriquées en usine - Partie 1 : Exigence générale
La présente Norme européenne spécifie une méthode de détermination de la résistance à l'eau des explosifs à usage civil, encartouchés ou en vrac, qui sont conçus pour être utilisés pour des opérations de tir en conditions humides.
Eksplozivi za civilno uporabo – Razstreliva – 5. del: Ugotavljanje odpornosti proti vodi
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Eksplozivi za civilno uporabo – Razstreliva – 5. del: Ugotavljanje odpornosti proti vodiExplosivstoffe für zivile Zwecke - Sprengstoffe - Teil 5: Bestimmung der WasserfestigkeitInstallation solaires thermiques et leur composants - Installations préfabriquées en usine - Partie 1 : Exigence généraleExplosives for civil uses - High explosives - Part 5: Determination of resistance to water71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13631-5:2002SIST EN 13631-5:2002en01-december-2002SIST EN 13631-5:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13631-5September 2002ICS 71.100.30English versionExplosives for civil uses - High explosives - Part 5:Determination of resistance to waterExplosifs à usage civil - Explosifs - Partie 5: Déterminationde la résistance à l'eauExplosivstoffe für zivile Zwecke - Sprengstoffe - Teil 5:Bestimmung der WasserfestigkeitThis European Standard was approved by CEN on 11 July 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13631-5:2002 E
Range of applicability of the test method.9Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.10
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.