EN 485-2:1994
(Main)Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
This part of EN 485 specifies the mechanical properties of wrought aluminium and aluminium alloy sheets, strips and plates for general engineering applications. It applies to flat rolled products. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, painted, etc. sheets and strips or to special applications such as aerospace, can stock, finstock, etc. which are dealt with in separate EN standards. The systems for designating these materials are described in EN 573-1 and EN 573-2. Their chemical composition limits are given in EN 573-3. Mechanical property limits are specified for all Class A alloys, as defined in EN 573-4. Temper designations are defined in EN 515.
Aluminium und Aluminiumlegierungen - Bänder, Bleche und Platten - Teil 2: Mechanische Eigenschaften
Der vorliegende Teil der Norm 485 legt die mechanischen Eigenschaften für Bleche, Bänder und Platten aus Aluminium und Aluminium-Knetlegierungen fest, die für allgemeine Verwendungßwecke bestimmt sind. Er gilt für flachgewalzte Erzeugnisse. Er gilt nicht für Vorwalzbänder, Spezialprodukte wie z.B. rollgeformte, geprägte oder lackierte Bänder und Bleche, oder Produkte, die für Spezialanwendungen, wie beispielsweise Luft- und Raumfahrt, Getränkedosen, Wärmetauscher usw. eingesetzt werden. Diese werden in gesonderten Europäischen Normen abgehandelt.
Aluminium et alliages d'aluminium - Tôles, bandes et tôles épaisses - Partie 2: Caractéristiques mécaniques
La présente partie de l'EN 485 spécifie les caractéristiques mécaniques des tôles, bandes et tôles épaisses en aluminium et alliages d'aluminium corroyés pour applications courantes. Elle s'applique aux produits laminés plats. Elle ne s'applique pas aux demi-produits laminés, livrés en bobines, destinés à être relaminés (ébauches pour laminage) ni aux produits spéciaux tels que profils de forme, tôles et bandes gravées, laquées, etc..., ni aux produits pour applications spéciales telles que la construction aéronautique, le boîtage, les échangeurs thermiques, etc. qui sont traités dans les normes EN séparées.
Aluminij in aluminijeve zlitine - Pločevine, trakovi in plošče - 2. del: Mehanske lastnosti
General Information
- Status
- Withdrawn
- Publication Date
- 11-Nov-1994
- Withdrawal Date
- 06-Jul-2004
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 7 - Sheets, strips and plates
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 07-Jul-2004
- Completion Date
- 07-Jul-2004
- Directive
- 87/404/EEC - Simple pressure vessels
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
- Referred By
EN 60079-6:2007 - Explosive atmospheres - Part 6: Equipment protection by oil immersion "o" - Effective Date
- 09-Feb-2026
- Referred By
EN 50015:1994 - Electrical apparatus for potentially explosive atmospheres - Oil immersion "o" - Effective Date
- 09-Feb-2026
- Referred By
EN 1999-1-1:2007 - Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules - Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 485-2:1994 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties". This standard covers: This part of EN 485 specifies the mechanical properties of wrought aluminium and aluminium alloy sheets, strips and plates for general engineering applications. It applies to flat rolled products. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, painted, etc. sheets and strips or to special applications such as aerospace, can stock, finstock, etc. which are dealt with in separate EN standards. The systems for designating these materials are described in EN 573-1 and EN 573-2. Their chemical composition limits are given in EN 573-3. Mechanical property limits are specified for all Class A alloys, as defined in EN 573-4. Temper designations are defined in EN 515.
This part of EN 485 specifies the mechanical properties of wrought aluminium and aluminium alloy sheets, strips and plates for general engineering applications. It applies to flat rolled products. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products such as corrugated, embossed, painted, etc. sheets and strips or to special applications such as aerospace, can stock, finstock, etc. which are dealt with in separate EN standards. The systems for designating these materials are described in EN 573-1 and EN 573-2. Their chemical composition limits are given in EN 573-3. Mechanical property limits are specified for all Class A alloys, as defined in EN 573-4. Temper designations are defined in EN 515.
EN 485-2:1994 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 485-2:1994 has the following relationships with other standards: It is inter standard links to EN 485-2:2004, EN 60079-6:2007, EN 50015:1994, EN 1999-1-1:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 485-2:1994 is associated with the following European legislation: EU Directives/Regulations: 87/404/EEC, 97/23/EC; Standardization Mandates: M/071, M/BC/CEN/89/2. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 485-2:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1998
$OXPLQLMLQDOXPLQLMHYH]OLWLQH3ORþHYLQHWUDNRYLLQSORãþHGHO 0HKDQVNH
ODVWQRVWL
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
Aluminium und Aluminiumlegierungen - Bänder, Bleche und Platten - Teil 2:
Mechanische Eigenschaften
Aluminium et alliages d'aluminium - Tôles, bandes et tôles épaisses - Partie 2:
Caractéristiques mécaniques
Ta slovenski standard je istoveten z: EN 485-2:1994
ICS:
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...