EN ISO 10462:2013/A1:2019
(Amendment)Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance - Amendment 1 (ISO 10462:2013/Amd 1:2019)
Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance - Amendment 1 (ISO 10462:2013/Amd 1:2019)
ISO 10462 specifies requirements for the periodic inspection of acetylene cylinders as required for the transport of dangerous goods and for maintenance in connection with periodic inspection. It applies to acetylene cylinders with and without solvent and with a maximum nominal water capacity of 150 l.
Gasflaschen - Acetylenflaschen - Wiederkehrende Inspektion und Wartung - Änderung 1 (ISO 10462:2013/Amd 1:2019)
Bouteilles à gaz - Bouteilles d'acétylène - Contrôle et entretien périodiques - Amendement 1 (ISO 10462:2013/Amd 1:2019)
Plinske jeklenke - Jeklenke za acetilen - Periodična kontrola in vzdrževanje - Dopolnilo A1 (ISO 10462:2013/Amd 1:2019)
ISO 10462 določa zahteve za periodične preglede jeklenk za acetilen, kot se zahteva za prevoz nevarnega blaga, in vzdrževanje v povezavi s periodičnimi pregledi. Velja za jeklenke za acetilen z in brez topil ter z nominalno prostornino vode 150 litrov.
General Information
- Status
- Published
- Publication Date
- 27-Aug-2019
- Withdrawal Date
- 28-Feb-2020
- Technical Committee
- CEN/TC 23 - Transportable gas cylinders
- Drafting Committee
- CEN/TC 23/SC 3 - Operational requirements
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 28-Aug-2019
- Completion Date
- 28-Aug-2019
Relations
- Effective Date
- 28-Feb-2018
Overview
EN ISO 10462:2013/A1:2019 is Amendment 1 to the international standard ISO 10462:2013 on gas cylinders - acetylene cylinders - periodic inspection and maintenance. Approved by CEN in January 2019 and published in August 2019, this amendment updates the original document without modification to its core scope. It was prepared by ISO/TC 58 (Gas cylinders) with input from CEN/TC 23 (Transportable gas cylinders).
This amendment clarifies procedures for the handling and transport of rejected acetylene cylinders and highlights the need to consider additional national requirements such as waste and environmental management when rendering cylinders unserviceable.
Key Topics
- Periodic inspection and maintenance: Continues to support standardized inspection and upkeep practices for acetylene cylinders (as defined in ISO 10462:2013).
- Handling of rejected cylinders: Amendment 1 replaces the last paragraph of clause 9 to address transport and disposition of cylinders judged unsuitable for service.
- Transport and marking: Where rejected cylinders must be taken to a facility to be rendered unserviceable, the amendment recommends clear marking prior to transport (for example, by white stencil painting) unless specific national waste/environmental rules apply.
- Regulatory alignment: Reminds stakeholders that additional requirements (waste management, environmental controls) may supersede the amendment’s guidance and must be observed.
Applications
This amendment is directly relevant to organizations and professionals involved in the lifecycle of acetylene cylinders, including:
- Cylinder inspectors and maintenance technicians
- Gas suppliers and distributors
- Occupational health and safety managers
- Transport and waste-management contractors handling end-of-life cylinders
- National standards bodies and compliance officers
Practical value includes clearer responsibilities for marking and transporting rejected cylinders, improved coordination with environmental and waste-management rules, and strengthened compliance with CEN-adopted requirements across member countries.
Related Standards
- ISO 10462:2013 – Base standard for periodic inspection and maintenance of acetylene cylinders.
- EN ISO 10462:2013 – European adoption of the ISO 10462:2013 standard.
- EN ISO 10462:2013/A1:2019 – This amendment as endorsed by CEN.
- ISSUING BODIES: ISO/TC 58 (Gas cylinders) and CEN/TC 23 (Transportable gas cylinders).
ICS classification: 23.020.35 (Gas cylinders).
Note: This document is an amendment and does not replace the full technical requirements of ISO 10462:2013. Users should consult the full standard and national regulations for detailed inspection intervals, test methods and mandatory legal obligations.
Frequently Asked Questions
EN ISO 10462:2013/A1:2019 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance - Amendment 1 (ISO 10462:2013/Amd 1:2019)". This standard covers: ISO 10462 specifies requirements for the periodic inspection of acetylene cylinders as required for the transport of dangerous goods and for maintenance in connection with periodic inspection. It applies to acetylene cylinders with and without solvent and with a maximum nominal water capacity of 150 l.
ISO 10462 specifies requirements for the periodic inspection of acetylene cylinders as required for the transport of dangerous goods and for maintenance in connection with periodic inspection. It applies to acetylene cylinders with and without solvent and with a maximum nominal water capacity of 150 l.
EN ISO 10462:2013/A1:2019 is classified under the following ICS (International Classification for Standards) categories: 23.020.35 - Gas cylinders. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 10462:2013/A1:2019 has the following relationships with other standards: It is inter standard links to EN ISO 10462:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 10462:2013/A1:2019 is associated with the following European legislation: EU Directives/Regulations: 2008/68/EC; Standardization Mandates: M/086. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN ISO 10462:2013/A1:2019 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2019
Plinske jeklenke - Jeklenke za acetilen - Periodična kontrola in vzdrževanje -
Dopolnilo A1 (ISO 10462:2013/Amd 1:2019)
Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance - Amendment
1 (ISO 10462:2013/Amd 1:2019)
Gasflaschen - Acetylenflaschen - Wiederkehrende Inspektion und Wartung - Änderung 1
(ISO 10462:2013/Amd 1:2019)
Bouteilles à gaz - Bouteilles d'acétylène - Contrôle et entretien périodiques -
Amendement 1 (ISO 10462:2013/Amd 1:2019)
Ta slovenski standard je istoveten z: EN ISO 10462:2013/A1:2019
ICS:
23.020.35 Plinske jeklenke Gas cylinders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 10462:2013/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2019
EUROPÄISCHE NORM
ICS 23.020.35
English Version
Gas cylinders - Acetylene cylinders - Periodic inspection
and maintenance - Amendment 1 (ISO 10462:2013/Amd
1:2019)
Bouteilles à gaz - Bouteilles d'acétylène - Contrôle et Gasflaschen - Acetylenflaschen - Wiederkehrende
entretien périodiques - Amendement 1 (ISO Inspektion und Wartung - Änderung 1 (ISO
10462:2013/Amd 1:2019) 10462:2013/Amd 1:2019)
This amendment A1 modifies the European Standard EN ISO 10462:2013; it was approved by CEN on 26 January 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10462:2013/A1:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 10462:2013/A1:2019) has been prepared by Technical Committee ISO/TC 58
"Gas cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2020, and conflicting national standards
shall be withdrawn at the latest by February 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, S
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...