EN ISO 22867:2008

SLOVENSKI STANDARD
01-maj-2009
1DGRPHãþD
SIST EN ISO 22867:2006
SIST EN ISO 22867:2006/AC:2008
*R]GDUVNLVWURML6WDQGDUG]DPHULWYHWUHVHQMDSUHQRVQLKURþQRYRGHQLKVWURMHY]
PRWRUMHP]QRWUDQMLP]JRUHYDQMHP7UHVHQMHQDURþDMLK,62YNOMXþQR
VSRSUDYNRP&RU
Forestry machinery - Vibration test code for portable hand-held machines with internal
combustion engine - Vibration at the handles (ISO 22867:2004, including Cor 1:2006)
Forstwirtschaftliche Maschinen - Schwingungsmessnorm für handgehaltene Maschinen
mit Verbrennungsmotor - Schwingungen an den Handgriffen (ISO 22867:2004,
einschließlich Cor 1:2006)
Machines forestières - Code d'essai des vibrations pour machines portatives tenues à la
main à moteur à combustion interne - Vibrations au niveau des poignées (ISO
22867:2004, Cor 1:2006 inclus)
Ta slovenski standard je istoveten z: EN ISO 22867:2008
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
65.060.80 Gozdarska oprema Forestry equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 22867
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2008
ICS 65.060.80
English Version
Forestry machinery - Vibration test code for portable hand-held
machines with internal combustion engine - Vibration at the
handles (ISO 22867:2004, including Cor 1:2006)
Machines forestières - Code d'essai des vibrations pour Forstwirtschaftliche Maschinen - Schwingungsmessnorm
machines portatives tenues à la main à moteur à für handgehaltene Maschinen mit Verbrennungsmotor -
combustion interne - Vibrations au niveau des poignées Schwingungen an den Handgriffen (ISO 22867:2004,
(ISO 22867:2004, Cor 1:2006 inclus) einschließlich Cor 1:2006)
This European Standard was approved by CEN on 15 October 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22867:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3
Annex ZA (Informative)  Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC .4
Annex ZB (informative)  Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .5

Foreword
The text of ISO 22867:2004, including Cor 1:2006 has been prepared by Technical Committee ISO/TC 23
“Tractors and machinery for agriculture and forestry” of the International Organization for Standardization
(ISO) and has been taken over as EN ISO 22867:2008 by Technical Committee CEN/TC 144 “Tractors and
machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the
latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 22867:2006.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directives.
For relationship with EC Directives, see informative Annexes ZA and ZB, which are an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 22867:2004, including Cor 1:2006 has been approved by CEN as a EN ISO 22867:2008
without any modification.
Annex ZA
(Informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Machinery Directive 98/37/EC, amended by Directive 98/79/EC.

Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with Essential Requirement 2.2 of that Directive and associated EFTA regulations.

WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.

Annex ZB
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of the
New Approach Directive 2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with Essential Requirement 2.2.1.1 except for first paragraph second indent, of that Directive and
associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
INTERNATIONAL ISO
STANDARD 22867
First edition
2004-12-01
Forestry machinery — Vibration test code
for portable hand-held machines with
internal combustion engine — Vibration
at the handles
Machines forestières — Code d'essai des vibrations pour machines
portatives tenues à la main à moteur à combustion interne — Vibrations
au niveau des poignées
Reference number
ISO 22867:2004(E)
©
ISO 2004
ISO 22867:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2004 – All rights reserved

ISO 22867:2004(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 1
4 Quantities to be measured and determined. 2
5 Instrumentation . 2
6 Measurement direction and location . 2
7 Operating conditions, test procedure and presentation of results . 3
8 Validity test . 3
9 Measurements and calculations. 4
10 Measurement uncertainties and declaration of vibration values. 5
Annex A (normative) Specific conditions for chain-saws. 6
Annex B (normative) Specific conditions for brush-cutters and grass-trimmers . 12
Bibliography . 18

ISO 22867:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 22867 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and
forestry, Subcommittee SC 17, Manually portable forest machinery.
This first edition cancels and replaces ISO 7505:1986 and ISO 7916:1989, of which it constitutes a technical
revision.
iv © ISO 2004 – All rights reserved

ISO 22867:2004(E)
Introduction
The determination of vibration characteristics is primarily used for
 manufacturer's declarations,
 comparing the data between machines in the family concerned,
 development work at the design stage, and
 the estimation of the vibration risk considering the specific conditions (parameters).
The use of this vibration test code will ensure reproducibility of the determination of the vibration
characteristics.
The operating modes are of interest for assessment of the vi
...