EN 302-1:1992
(Main)Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of bond strength in longitudinal tensile shear
Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of bond strength in longitudinal tensile shear
This part of EN 302 describes a method of determining the strength in longitudinal shear of adhesive bonds between lap joint test pieces made of beech (fagus sylvatica). It is suitable for the following applications: a) for assessing the compliance of adhesives with EN 301; b) for assessing the suitability and quality of adhesives for load-bearing timber structures; c) for comparing the strengths of bond with thin or thick gluelines.
Klebstoffe für tragende Holzbauteile - Prüfverfahren - Teil 1: Bestimmung der Klebfestigkeit durch Längszugscherprüfung
Dieser Teil von EN 302 beschreibt ein Prüfverfahren zur Bestimmung der Längs-Scherfestigkeit von Klebstoffverbindungen an überlappten Prüfkörpern aus Buche (Fagus silvatica). Er ist für folgende Anwendungsfälle geeignet: a) Zuordnung des Klebstoffs zu einem der in EN 301 angegebenen Klebstofftypen; b) Feststellung der Eignung und der Qualität von Klebstoffen für tragende Holzbauteile; c) Zum Vergleich der Klebefestigkeiten bei dünnen und dicken Klebstoffugen.
Adhésifs pour structures portantes en bois - Méthodes d'essais - Partie 1: Détermination de la résistance du joint au cisaillement en traction longitudinale
Cette partie de la norme EN 302 décrit une méthode d'évaluation de la résistance en cisaillement par traction longitudinale de joints d'adhésif réalisés sur éprouvettes en hêtre (fagus silvatica) à recouvrement. Elle a pour but: a) de garantir la conformité d'un adhésif avec EN 301; b) de démontrer l'adéquation et la qualité d'adhésifs pour structures portantes en bois; c) de comparer les résistances de joints mince et épais.
Lepila za nosilne lesene konstrukcije - Preskusne metode - 1. del: Določanje trdnosti lepljenega stika pri vzdolžni natezno strižni obremenitvi
General Information
- Status
- Withdrawn
- Publication Date
- 16-Jun-1992
- Withdrawal Date
- 13-Jul-2004
- Technical Committee
- CEN/TC 193 - Adhesives
- Drafting Committee
- CEN/TC 193/SC 1/WG 8 - Revision of EN 301 and EN 302
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 14-Jul-2004
- Completion Date
- 14-Jul-2004
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Smithers Quality Assessments
US management systems and product certification.
DIN CERTCO
DIN Group product certification.
Sponsored listings
Frequently Asked Questions
EN 302-1:1992 is a standard published by the European Committee for Standardization (CEN). Its full title is "Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of bond strength in longitudinal tensile shear". This standard covers: This part of EN 302 describes a method of determining the strength in longitudinal shear of adhesive bonds between lap joint test pieces made of beech (fagus sylvatica). It is suitable for the following applications: a) for assessing the compliance of adhesives with EN 301; b) for assessing the suitability and quality of adhesives for load-bearing timber structures; c) for comparing the strengths of bond with thin or thick gluelines.
This part of EN 302 describes a method of determining the strength in longitudinal shear of adhesive bonds between lap joint test pieces made of beech (fagus sylvatica). It is suitable for the following applications: a) for assessing the compliance of adhesives with EN 301; b) for assessing the suitability and quality of adhesives for load-bearing timber structures; c) for comparing the strengths of bond with thin or thick gluelines.
EN 302-1:1992 is classified under the following ICS (International Classification for Standards) categories: 83.180 - Adhesives. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 302-1:1992 has the following relationships with other standards: It is inter standard links to EN 302-1:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 302-1:1992 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LKlebstoffe für tragende Holzbauteile - Prüfverfahren - Teil 1: Bestimmung der Klebfestigkeit durch LängszugscherprüfungAdhésifs pour structures portantes en bois - Méthodes d'essais - Partie 1: Détermination de la résistance du joint au cisaillement en traction longitudinaleAdhesives for load-bearing timber structures - Test methods - Part 1: Determination of bond strength
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...