EN 2435-002:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Barve in laki - Dvokomponentni temeljni premaz, korozijsko obstojen, kromiran, ki se suši pri sobni temperaturi - 002. del: Visoka korozijska odpornostLuft- und Raumfahrt - Beschichtungsstoffe - Korrosionsbeständiger Zweikomponenten-Primer, kalthärtend, chromathaltig - Teil 002: Hohe KorrosionsbeständigkeitSérie aérospatiale - Peintures et vernis- Peinture primaire anti-corrosion chromatée, à deux composants polymérisant à température ambiante - Partie 002 : Haute résistance à la corrosionAerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 002: High corrosion resistance49.040Prevleke in z njimi povezani postopki, ki se uporabljajo v letalski in vesoljski industrijiCoatings and related processes used in aerospace industryICS:Ta slovenski standard je istoveten z:EN 2435-002:2006SIST EN 2435-002:2009en,de01-junij-2009SIST EN 2435-002:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2435-002June 2006ICS 49.040 English VersionAerospace series - Paints and varnishes - Corrosion resistantchromated two component cold curing primer - Part 002: Highcorrosion resistanceSérie aérospatiale - Peintures et vernis- Peinture primaireanti-corrosion chromatée, à deux composants polymérisantà température ambiante - Partie 002 : Haute résistance à lacorrosionLuft- und Raumfahrt - Anstrichstoffe -Korrosionsbeständiger Zweikomponenten-Grundanstrich,kalthärtend, chromathaltig - Teil 002: HoheKorrosionsbeständigkeitThis European Standard was approved by CEN on 27 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2435-002:2006: ESIST EN 2435-002:2009

EN 2434-004, Aerospace series — Paints and varnishes — Two component cold curing polyurethane finish — Part 004: High flexibility 1) EN 2709, Aerospace series — Aluminium alloy 2024-T3510 bar and section — 1,2 ≤ (a or D) ≤ 150 mm with peripheral coarse grain control1) EN 3837, Aerospace series — Paints and varnishes — Nature and method for surface preparation of test pieces in aluminium alloys1) EN 3840, Aerospace series — Paints and varnishes — Technical specification1) EN 4385, Aerospace series — Non-metallic materials — General organisation of standardisation — Links be-tween types of standards1) ISO 1513, Paints and varnishes — Examination and preparation of samples for testing ISO 3270, Paints and varnishes and their raw materials — Temperature and humidities for conditioning and testing ISO 3696, Water for analytical laboratory use — Specification and test methods TR 7000-9, Aerospace series — Non-metallic materials — Rules for the drafting and presentation of material standards — Part 9: Paints and varnishes2)
1) Published as ASD Prestandard at the date of publication of this standard. 2) Published as ASD Technical Report at the date of publication of the standard. SIST EN 2435-002:2009
...